~ FastBuds Strawberry Gorilla Autoflower Harvest Report ~ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Here we go fam!...after 13 exciting weeks this run of three FastBuds Strawberry Gorilla Autoflowers has come to an end and, despite some hiccups along the way, all three of this phenomenal cultivar delivered the goods! This was my first attempt at 'hydroponic' growing and honestly I made some mistakes along the way. In hindsight, I ran too many feed cycles in a 24hr period which did not allow the medium and fabric pots dry out enough which led to a Fungus Gnat infestation which wasn't caught until late into flower. I also think I had the nutrient level set too high which may have kept the upper portion of the medium too wet. Other than those issues the only other hindrances were related to the actual ebb/flow system itself and beyond my immediate control such as plant spacing, solution temperature etc. I will say that when using this AirCube system I found out the hard way that you really need to have all of your plants starting at the same time, and preferably of the same strain unless you're using a trellis net to control the canopy height. Lastly, I will say that the GrowAce AirCube system was very well built, used quality materials, is expandable, and was very easy to setup and get running. Now to the plants... All three Strawberry Gorilla's were germinated together and sprouted within 24hrs of one another. I did very minimal training on them consisting of leaf tucking and gentle bending of branches, then some LST using horticulture wire starting in Week 1 of flower, which all three responded well to. All three pheno's began to flower right around Day 24 from seed and continued for another 10 weeks. I kept the tent temperatures during veg and early flower between 76-80℉ with the light on, and 70-72℉ with the light off and the RH at 60-70%. Once in flower, I gradually lowered the 'light on' temperature to 72-75℉ and 65℉ during the dark period. I also lowered the RH down to 35-40% during late flower. The entire run they were fed Plagron nutrients exclusively, using their Cocos 'A' and Cocos 'B' along with Green Sensation. Power Roots and Royal Rush. I had nothing but great results from this lineup from Plagron and highly recommend their entire product line! I ended up with three distinct phenotypes, two of which leaning more to the fruity/strawberry side. The third pheno was Glue all the way, with a pungent, chem-like aroma that will make your eyes water! The #1 and #2 phenotypes took on some beautiful coloration through late flower, expressing shades of purple, pinks and lavender. Both of them also had a very fruity/sweet aroma that grew extremely strong during late flower. The #3 phenotype struggled a little bit during the run and was affected the most by the Fungus Gnats (which I'm sure affected her yield) but incredibly ended up not only being the most aromatic of the bunch, but also the frostiest! The #3's flowers were a lime green with hints of pink and lavender on some, all were covered in large headed trichomes! Once the Strawberry Gorilla's reached Week 8 of flower I began regular checks of their trichomes and once they had reached a ratio of 90% milky/10% amber I placed all three plants in darkness for 72hrs in the 4x4, keeping the temperature at 64℉ and a RH of 35%. After three days in the dark I chopped and hung the plants whole in the 4x4 suspended by a wire I ran across the tent. I kept gentle air circulation going in the tent and maintained a temperature of 55-60℉ and monitored the RH, keeping it at 50% for the first 24hrs, then 60% for the remainder of the hanging time. The first plant was ready to trim in 9 days, with the other two 10 & 11 days respectively. All three were trimmed and their flowers placed in Mason jars with a hygrometer inside to begin the curing process. The beautiful 'sugar trim' was sifted on my 24"x24" four screen setup which I did outside on my porch on a calm day that was only 38-40℉. I got a tremendous return of 42g of some beautiful 90u sift that I can't wait to press into rosin! All in all, having cultivated this strain previously I can say that the results could have been a whole lot better, but... taking into consideration my level of expertise with hydroponic growing and the stresses that the Strawberry Gorilla's had to contend with, I'd say that it was a win and a testimony to how resilient and strong this strain from FastBuds is... It's no wonder that Strawberry Gorilla Auto is a trophy winner!🏆

Loved the smoke small yeilds ive only grown a few yeild worthy autos but all have been terpy and packs a punch

20.11.2022 139 giorni dal seme al raccolto 79 giorni di fioritura Pianta produttiva, forte, produce cime lunghe e dense, non eccezionale secondo me il risultato organolettico,preferisco varietà magari meno produttive ma con sfumature di profumi e gusto più marcate. Ho dato comunque un buon voto per la produttività della pianta, ma non credo che la ricoltiverò in futuro.

Stripped up the bottoms and and will flip to 12/12 tomorrow. Monster plant which has filled almost a 5x5 area and has been a real pain to keep healthy

Day 71👋🌱 I started flushing some days befor. I think I’ve got 20 days left but this lady eat a lot of feeding this last weeks so I give some more flushing. Buds looks full of all What they needs also if now they need to get fat and fat. :) let’s see what’s happen. Giving ph controlled water at 6.2/6.5, I check TDS to water owerflowing from pot, bringing it to 50ppm from 400. Now I’ll start checking trichomes every three days, I’d like a 60% white and 40% amber Day 72👋🌱🌱 Hi all growers, how is going? 😊 I'm at my first real flush for this Orange, i gave 10 lt of ph controled water and was checking ppm from water coming out. i gave water unitl it reach 400 ppm, my water is 200 ppm, i hope i'll bring it to 50 ppm for next flush in 3 days. i think bud are going to bloom nice this last days befgore harvest, i can feel it :D Day 74👋🌱🌱🌱🌱 Soil is already quiet dry, smell is increasing rapidly. Today I’ll give another e 1 lt of water and Sunday I’ll do another flush. I think will go up to 90 days. Bud will get fatter and fatter🏆. Maybe I could have fertilise two times more, but anyway I’d not a big problem, I’ve been feeding them a lot since the beginning so a more long flush won’t be a problem at all. Can’t wait to the harvest. Day 77 🌱🌱🌱🌱🌱🌱🌱 Just posting some trichome pictures, waiting to some changement before publishing some new pic of the lady. Keep washing it with ph controleed water that looks always cleaner, i think i'll be cutting the most high bud some days before the rest of the plant. Can't wait anymore Let’se go! ❤️🌱 Any suggestion is really welcome :)😋🌱🌱

Lemonatti and Oreoz are all looking strong going into week 3 flower and they’re already frosty. The terps are developing on the Oreoz and lemonatti is starting to wreak of fermented lemons and gas

Week 3 of the visible flowering 😃 everything is going well almost automatic pilot End of week 3 i did a little defoliation 🙈 I always hate to pick off al the big light blocking leaves but it's necessary and after a day they bounce back and nothing to worry about 😁👌 i always try to defoliate at the end of week 3 of the visible flowering hopefully the last time 🙏 so the buds are having all the light that they need

The fungus gnats are getting a little better. To bad they already did a lot of damage. Plants 3 and 4 have now caught up in height with plants 1 and 2 which are a month older. The buds and plants 3 and 4 are way bigger too. Flowers are starting!!! Loving it!! Defoliated at the end of the week.

What you guys thinking of these going start feeding them bio grow what else could I get

So she was a breeze to grow took to training like a champ fimd her early and did bowl training on her till around 2nd week in flower then removed the ties she would have been even better without the issues I had fed her daily on the wwf regime aiming for 30% runoff this seems to work really well on autos and get big yields of them trimming her was easy did wet trim then hung to dry for 6days at 65/60 with a small fan circulating the air then in a tub for 3 days burping buds are nice and tight loaded with thc and smelling awesome really happy with how things turned out thanks to all my followers and friends grow share learn what were all about happy growing guys

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Happy New Year Growmies! Wishing everyone good health and lots of stinky buds 😄💨🥂 Flower week 3 and the girls are behaving nicely. After the heavy training they “only” stretched about 15 cm, so we’re sitting around 95 cm (37,5 inch)now. They look amazing though, super healthy and everything seems nicely dialed in. With the drier weather outside the VPD is perfect, and I’ve found the sweet spot for the extra additives on top of the base feed. EC is around 1.6. On feed days I slightly reduce calcium to make room for Bud Candy and Bud Factor X, giving them a bit of extra magnesium and carbs during this important stage. The missing calcium is then made up on the second watering, which would normally be just plain water.💦🧑‍🌾 We’re also seeing pistils stacking into real budlets now, getting denser and chunkier, and there’s a noticeable increase in smell and stickiness as trichome production really starts to kick in. The light is set to 80% intensity and positioned approximately 40 cm above the canopy. Have a lovely weekend to everyone! Peace✌️

This week i made a plan for the plants feeding. For start gave a small portion of nutrients like 1/4 from the suggested to see the reaction of the plants. Day 21: fim one plant (the plant referred as cotyledons now is going to be mentioned as fim).In a few days will top the other one.

If somebody is thinking about their first strain this is a good start. Just try to avoid some basic mistakes and all should be just fine.

Day 71 : sie bleibt noch im Aufbau !!! Day 72: + 2L Flaschenwasser ++ Dünger mit wenig CalMag + final PH 6.35 Etwas sehr interressantes ist mir aufgefallen , deswegen hab ich auch ein Video davon gemacht. Eine SideCola hat sich oben wie topping verhalten und 2 TopBuds entwickelt . Sieht echt nice aus . Ausserdem hat sie überall da wo ich etwas abgeschnitten habe einfach neue Triebe mit neuer Blüte gebildet. Diese Dame hat irgendwie nur ein Sinn , Blüten bilden wo es geht :)) Ich lass es einfach wachsen , dagegen arbeiten wäre eh zuviel stress. Day 73: Day 74: + 2L Flaschenwasser ++ Dünger mit wenig CalMag + final PH 6.10 Day 75: Day 76: + 2L Flaschenwasser ++ Dünger mit wenig CalMag + final PH 6.10 Day 77: Trichome sind noch nicht ganz fertig .

Growers' rating for Exotic Seeds with Adam iLL!

Time to shine! Watch Exotic Seed receive their grower-approved rating from the growdiaries.com crew. A big nod to an standout in the growing game! #ExoticSeed #GrowDiaries

It's been an exciting journey training my plants, and I'm happy with the progress they've made. I've been implementing various training techniques to encourage healthy growth and maximize yields. The plants have responded positively to the training, and I'm hopeful that they will continue to thrive and develop as planned. Fingers crossed for a successful outcome!

First watering without nutrients. The cold temps are bad. The buds are small, could be more. But im happy no mold or fungi.