Just waiting on one last pgc

week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.

Started LST on day 16. So far I been having good luck.

Week 3: 2 are thriving 10" and 7", 1 slightly smaller 3", 1 quite small but healthy green and 1 sickly. light is now at full so I will wait while they grow into the light but may lower it depending on how they take the light. I will slowly bring it to 3'. Started the calmag and increasing nutes.

0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

1 x black apple hitchcock}p#1 1 x choccolatto 1 x black hell 1 x black apple hitchcock p#2

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Exotic Seed, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! WOOOOW!! Grazie a tutti per il supporto ❤️🍀🔥

So the story continues... this grow is really an experiment for me to train one plant within my 4'x2' grow space to ScrOG vertically and use the SP250 light on its side. For the majority of the vegetative stage the light will be hung normally above the plant until a week prior to flipping the light schedule and initiating flowering. The plant passed its seedling stage and has been vigorously growing albeit showing strong signs of over-watering and calcium deficiencies. It's really a transpiration issue which I have not solved yet. Increased distance to light as the plant may be growing too fast for its root mass. From feedback at Coco for Cannabis (CFC), it is a Cal deficiency and a young plant getting used to the grow in coco - quite common and not a sign of over-watering. Measuring run-off EC at each fertigation event as I increase the feed EC to monitor what the plant is doing/feeding. Fertigation is now maintained at twice a day (at lights on and 4hrs prior to lights off period) to maintain the target EC. Light period is during the night time to better maintain heat/humidity conditions during light off period (which happens during daytime). ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes ; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 (gives me great control over the environment) - ventilation fans - aquarium heater for nutrients solution (for winter use only) - small oil heater (for winter use only) - small dehumidifier - 20L Airpots (as final pots) and 3.5L general plastic pots (for seedling stage) - Canna Coco substrate mixed with 40% perlite - GHE Flora Trio as base nutrients and various additives - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy, the other at the roots level - these allow for external monitoring and recording) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Some strain info from Royal Queen Seeds ; An amazing mix of genetics background - Its true genetics are unknown. Some say OG Kush is a mix of ChemDawg with a Lemon Thai and Pakistani Kush. Others say that it’s just a special cutting of ChemDawg from the early 90s. The most obvious trait of OG Kush is its strong, unique, very dank, slightly citrus aroma, almost like fuel or strong detergent. The flavour of OG Kush is equally as strong and dank, with a long-lasting aftertaste. Strong mental and physical high - OG Kush is an extremely strong cannabis strain, with most experienced smokers listing it as one of their favourites. The effect is as strong physically as it is mentally. Though its effect is like an Sativa, the strain's genetics are mostly Indica. The effect is as strong and complex as the flavour. OG Kush takes around 8 weeks to flower and on average the yield is 500 grams per plant. Big buds with lovely tones - OG Kush is known to stretch slightly during growth but soon starts to fill out during flowering. Generally, it will reach a height of 90 to 160 cm. Its buds are large and dense, lime green clusters covered with a large amount of resin.

Thursday this week has been good so far, I pulled each plant out yesterday and tidied everything up. I got rid of all the tiny lateral branches that didn’t make the cut and I got Rid of everything that was below about half way down the plant. Obviously the lateral branches that grew to the same height as the canopy are staying it’s just all the non starter stuff below. I annoyingly had my in take fan die on me. We’ll sort of, it just keeps tripping the fuse on my electric so I assume it’s from when I had my res flood onto the floor - I forgot it was there on the floor because it was hidden behind the res

Feels like it snowed on it over the last week, full of cristals. I think it needs about one more week and then it's ready for harvest.

June 14th - Day 118 : Heavy defoliation today as I can’t lower my humidity and tried everything from cleaning to lowering the humid in the lung room... But I mean...!!! Looooooks at theses beautiesssss

Day 66: flush 💦 Pictures are taken on day 70📸 -------------------------------------------------- She is doing good, i will chop her next weekend. Happy growing 🌱

Added some Universol Yellow to counterpart the KMPS which has high K. ORP dropped a lot, countered it with KMPS and POLY(DIMETHYLAMINE-CO-EPICHLOROHYDRIN). RH and am ambient temperature are lower at the end of the week due to my other plant being chopped and I want a cooler climate for slow cure over 14-21 days for that one, both grow and dry tent are in the same room. The Buds are more dense than previous weeks, the supplemented K seems to do the trick and of course because it is end of life. Will harvest early next year, wanted to do it on the last day of week 12 but I was sick and holidays. Internodal spacing is good, long buds at the top. Buds smell like sweet candy with a touch menthol, lets see if that stays after cure. My mind changed about the plant in the last week, maybe this one shows just at the end. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20241223 23.0 60.6 20241224 22.7 61.5 20241225 22.8 61.7 20241226 23.2 62.2 20241227 22.4 61.7 20241228 21.9 60.6 20241229 21.3 57.8 DATE - PH 20241223 5.83 20241224 5.81 20241225 5.76 20241226 5.74 20241227 5.65 20241228 5.78 20241229 5.85 DATE - ORP (mV) 20241223 80 20241224 30 20241225 -12 20241226 19 20241227 128 20241228 104 20241229 81 DATE - EC(us/cm) 20241223 1664 20241224 1617 20241225 1604 20241226 1551 20241227 1558 20241228 1597 20241229 1614 DATE - CF 20241223 16.64 20241224 16.17 20241225 16.04 20241226 15.51 20241227 15.58 20241228 15.97 20241229 16.14 DATE - °C (Reservoir) 20241223 21.6 20241224 21.6 20241225 21.8 20241226 21.7 20241227 21.5 20241228 21.5 20241229 21.0

🚀 Let's fly to another weeK 🚀 🌸 Dozi ZoZi – Breed Bros 🌸 WE jump in to DAY85 / FLOWER 55 / WEEK 12 I just realized there's only a week left. It will be ready exactly as the Breed Bros claims in 62 days. Now just water to the end and I hope there will be a happy ending. THX for watching and see you next week 👊

Such an amazing flower, really great especially a phenomenal hash producer yall will be super satisfied with this one!! She’s a shorty but Make sure you top 4 to 6 times or even more to have all them gooey bud producing heads , Dirtyblonde is absolutely an amazing plant!!

Casey's Rollex OG is doing good. She was switched to flowering times 4 days ago. She had a solution change 2 days ago. She is growing really well. Just waiting on the stretching and flowering now. Thank you Spider Farmer, and DutchFem Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Nicole x OG Kush