The plant is developing well after pruning. its branches grew well. I removed the first node as they were small.

Hi everyone 🤗 It is getting bushier and bushier 😅. I think next week she will finally be in the flower tent 😂. Feeding continues unchanged, and the conditions are unchanged :-). I wish everyone a nice week, stay healthy 🙏🏻 and let it grow 🌱 You can Buy this Strain at : www.Zamnesia.com Strain : Sour Diesel ☝️🏼😍 Genetik: Diesel x Northern Lights 👍 Vega Lampe: 2 x Todogrow Led Quantum Board 100 W 💡 Flower lampe: 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡 ☝️ Erde: Canna Terra Professional + ☝️ Dünger: Canna Termittel Vegra Vega, Canna Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal/Mag, Canna Ph - Grow, Canna Ph - Flores ☝️ 🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧

Bewässerung: 5000 ml jeden 3 Tag in der Zwölften Woche pH-Wert: 6,3 EC-Wert: 1,6 mS/cm Temperatur: 30ºC Luftfeuchtigkeit: 50% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen das es was zu bekämpfen gibt, sobald die ersten Anzeichen da sind werden wir handeln :) Düngemittel: Sie bekommen ab jetzt Brenneseljauche da sie im Outdoor Bereich ist. Besonderheiten: Sie wurde nach draußen umgepflanzt. -Tag 88 sie hat heute morgen die 2 Meter erreicht... Was für ein Monster 👍😯, Wir haben uns entschlossen da die Überdachung nur 240cm hoch ist das wir sie an der Roten Schnur die man auf dem Foto sieht entlang leiten werden, und somit die spitze nicht abschneiden müssen. Sie wird dort dann sehr viele kleine Spitzen bilden. Mal sehen wie das wird 😌

Flush finished, hit with high dosage Pk, onto half nutrients, isn nutrients

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

Hello everyone. Another week passed, gave her water and some enzimes on day 33, I noticed some leaf intervenal discoloration, not too concerning in my opinion. Maybe the enzimes were too much or some nutrient lock out due to a somewhat excessive fertilization. Any opinion on this issue? I think will go on with plain water to the end I think, hoping the problem will sort out itself. What do you think? Other then that I think buds oare forming fast and fine, she's putting out a little resin and smell now. Ciao 😊

📆 Semana 5 El mal tiempo continúa 😞, con lluvias y poca luz, lo que sigue afectando el desarrollo de la planta. Aunque el crecimiento sigue siendo lento, se mantiene sana y sin signos de estrés o deficiencias. Los nudos siguen formándose de manera adecuada, aunque con menos vigor del esperado. Seguimos cuidando al máximo para que, cuando el clima mejore, recupere el ritmo de crecimiento. ¡No nos rendimos! 💪

Hello:) looks like we‘re done in a few days:) the white truffle and mac n cheese look almost ready now ( right side) but the mimosa and blue zushi could do a few more days so I‘ll wait. I look at the trichomes every day now:)

Almost ready. Look at the main bud 🤩 I will update fresh photos throughout the week.

23/07/2025 20:20 Gorilla Z Is officially in the preflower stage this One stayed pretty small so i don't expect a lot of g when It comes to harvest time First days of the frostbanger in the spot,transplanted Easy and i think Is gonna be great weed from her,showing signs that it's going to flower soon on her 15th day WTF??? EC Is higher than usual because i added honey and Epson salt on It,i want to give a kick to the bioactivity of the soil

1st grow in 14yrs, 1st ever auto. I'm nervous.... Week2: Dried out coco from over watering. Hung 2nd LED MH-TS1000. Hung wet towel in front of fan to increase Humidity. Getting 82F/56H much better VPD (went from 2.1 to 1.15). Tomorrow will finish topping off soil. I didn't have any Bone Meal till today. Well it's day14, I decided to go ahead and top off soil. 1st I added to ea 1/3cup of Bone Meal, 1/4 cup Bat Guano, 2tbsp Calcium Nitrate and Potassium Nitrate. Lightly mixed layer to top 1" of soil. Then added 1-1/2" of Canna coco mix (25% worm castings, 10% perlite) gently to surface. Last, I added a layer of cedar chips to the surface. (Hope I didn't do this too early...)

Topped the rest, waited to regenerate and finally transplanted into 22L Fabrics. (Infused with 2ml/L root juice & calmag)

Día 44 (15/07) Wow! No hay shock de trasplante! 😍💥😁 Todas las ramas se han estirado hacia arriba tras el ajuste de LST y se están formando nuevos nodos rápidamente Esta combinación de nutrientes de Lurpe + substrato de PRO-MIX HP es una maravilla 😍 Día 45 (16/07) Ayer tuvimos ola de calor (37 ºC) y han aguantado muy bien! A última hora de la tarde (cuando ya no había sol directo) les apliqué H2O en spray foliarmente para refrescar los estomas Hoy parece que vuelven las temperaturas estándar para esta época del año: 29 - 30 ºC en las horas centrales del día Riego con 1 litro de H20 pH 6,5 Día 46 (17/07) Pequeños ajustes de LST Hay algunas ramas inferiores que no se han formado / estirado mucho Lo más probable es que haga una buena limpieza este domingo, 7 días después del trasplante, para dejar solo los brotes por encima del 4º nudo Día 47 (18/07) Riego con 0,5 litro de H20 pH 6,5 Este domingo (día 50) haré limpieza de partes bajas y tal vez también de nuevo topping en las 4-6 ramas principales 😁 Día 48 (19/07) Día de muchísimo calor con 37 ºC. A ver como lo llevan! Riego con 0,5 litro de H20 pH 6,5 Día 49 (20/07) Para ayudarles a llevar mejor el calor de las horas centrales del día, coloca una malla de sombreo (70%) sobre el invernadero Lo cierto es que se nota que baja mucho la temperatura debajo de la malla! Van a estar más fresquitas! 😍 Riego con 0,5 litro de H20 pH 6,5 Día 50 (21/07) Training session! Hago limpieza del tercio inferior de la planta, de todas las ramas y nudos que no superan la línea del dosel marcada por el 4º nudo (1er topping) También hago topping (2º) a todas las ramas principales La idea es tener 12 ó 14 colas principales para que no se hagan muy altas De paso saco unos cuantos clones de las ramas inferiores eliminadas 😁💥 Para superar el estrés, hago las siguientes aplicaciones y riego: - Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L - Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.

Day 15 Flower (Day 57) The first day of week 3 of flower. I switched the light recipe in my main tent from the Flower Induction program to the Flower program now when the right girl is in flower. I also gave her 3 liters of pH 6.1 water. The left girl didn't need any water though. That was all today. Day 16 Flower (Day 58) All I did today was to give each girl 3 liters of pH 6.5 water. Day 17 Flower (Day 59) I gave the right girl 3 liters of pH 5.9 water today. It's a bit low maybe (added too much pH down and was too lazy to fix it) but should be alright. My pH is different each watering anyway, as I aim to optimize nutrient uptake by covering a broader pH range. The left girl didn't need any today as she drinks a lot less due to being smaller. That being said, she is now hitting the light :/ It was never my intention to grow her in such a confined space, but here we are. She should have been trained differently and vegged shorter to grow correctly in such a small space. I have ordered a new, taller tent which will arrive next week. Until then, she'll be snug, and I don't think I can take any canopy pics for a few days. I started brewing some compost tea following the same recipe as previously (worm castings, rock dust, biochar, lime, bentonite, neem meal, kelp meal, and molasses), but I upped the castings, the neem, and the kelp. Long overdue as it was over two weeks since last time. I will feed this tea (unfiltered) tomorrow after 24 hrs of brewing. Day 18 Flower (Day 60) Today I gave each girl 3 liters of pH 6.3 compost tea that brewed for 26 hours. I also added a few tablespoons worth of alfalfa seeds that I ran through a blender first to beat up into a powder. I didn't filter the tea, so all ingredients ended up as a top dressing that will get watered in as time goes. The small tent is packed, and the girl is pressing up against the light. It got to hold out until next week, so it is what it is. It is getting a bit cramped in the main tent as well, so I moved up the lights as far as I could without going full McGyver. It's the first time I grow this strain, but she sure is a stretcher. The weather has gotten warm here (finally!), but of course, now my tent is getting even hotter. I'm trying to combat it to some extent by running the extractor fan more. That will get the temp down a bit, but unfortunately, it will also cause the humidity to drop. I put in my small humidifier to help with that, so the VPD is still in a reasonable range. Day 19 Flower (Day 61) I defoliated the right girl today by removing some leaves and branches low down where the lights don't reach. The left girl must also be done, but I'll work on her when she is between tents next week. I also gave the right girl 3 liters of pH 6.5 water. That was it for today. Day 20 Flower (Day 62) All I did today was to water each girl with 3 liters of pH 6.7 water. I hope that my new tent arrives sooner rather than later since the left girl is pushing up so much against the light that the top flowers are starting to get burnt. Wonderful... :( I've turned down the light as low as it goes (15%), that's pretty much all I can do except turning off the light completely. Day 21 Flower (Day 63) The last day of the third week of flower and things are moving along nicely except for the crowded tent, but hopefully, the new tent will solve that in a day or two. The left girl is 85 cm tall (17 cm increase in a week), and the right girl is 117 cm tall (also a 17 cm increase in a week). There wasn't much to do today. I gave the right girl 3 liters of pH 6.5 water and snapped a few pics. That's all.

Defoliating weekly

End of week 6, Beginning week 3 of flower for the OG Kush auto🍓🌱 Plant filled up the 60x60 cm tent entirely, and keep on stretching! And to think i was worried at the beginning that this plant won't get big 🤦🏽😅. I noticed some leaf curling/burning a bit, and some bleaching of 2 small leafs (not so sure about the bleaching), so i lowered the intensity of the cree cobs led to total 220W. This happened to me in my last grow (zkittles auto) as well. I guess the cobs can get too powerful for a small tent like that. I'll definitely keep an eye on that issue. Other then that all goes smoothly;) - I do some light defoliation to the plant every day, - in the next few days I'll do the big cleaning - lollipoping 🍭 and full defoliation. P.s - sorry about the bad lighting in this week's photos, I'll fix that next week✌️🏽

New week for the 8 strain 12 plants grow The transfer all plants into the 11 L went great and growing nicely Purple Berry Kush is bin put together in one 18L pot and want to get adventures with the training 6/3/22 Super Critical Bud CBD has balls so he's out the group 9/3/22 Training begins top a couple couple day's ago and beginning to LST them Banana Punch and purple berry Kush still to small to train. And i think i only gone train the purple berry Kush and let banana Punch grow on it's own no topping no LST Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Finished really fast! Not expecting a very big harvest, they needed a longer veg time, pretty small at start of flowering, didn't use massive bloom this run either Going of the last run expecting good quality. Small buds.

This week was great, I flipped her to flower and pistils began sprouting. Ready to see her nug up.