Still just water and some fish shit Jan. 1 Happy New Year welp to start new year off drop my very cheap PH meter in the bucket water and now the readings are off and I probably watered them today with wrong pH water Sour diesel looks cool didn’t water today soil was still moist but the amnesia haze be

Over fed some of them others go very good. Smells already realy good

Update: what a week full of activity and positive growth. The Amnesia is a big beast of a lady now. She is nearly 2.5ft across her canopy and growing. I have had a shuffle round in the grow space and she is now under the sp250 with her soil friends. The supercropped knuckles are nice and chunky to support the spiked colas I plan on her having. She has flattened out nicely too. I expect her to get even wider by the flip time and with so many growing tips she should be a good producer. Sweet Afghani Delicious has thankfully now started her real recovery from the root rot after a week in new feed. She has some good potential for a decent finish by the way shebhas bounced back over the last 2 days with new growth and now starting to fill up wirh chlorophyll again. Red Hot Cookie is also on the road to recovery with way more colour and actual vertical growth starting too. Her 5th node looked done for so i left it to fall off if it wanted and concentrated on the 4th nodes but she had other ideas and has now began growing the 5th again. Overall inam happy to see a recovery in them as i thought I was going to lose the nft girls from all the damage. Now at 100% power on the sp3000 with an rh of 67% and room temps at approx 24.5°c. With another weeks growth I am hoping to be close to flipping them all as the Amnesia is in danger of total room domination!!. Be safe and well. GGD

We are almost at the magic moment, it is about to go into flowering and the vegetative phase is practically over in a few days. Our Purple Urkle by Zamensia is a very beautiful plant with a good internodal distance and is developing very very well. We have just done the last topping that brings her 16 tops, 16 small clones of the main cola that will come up I hope at the same time and all together and above all I hope that the cold will give us a great resin and a beautiful coloration. During the topping the use of nitrogen is a very delicate subject. The cuts of the topping slow down the plant and the leaves tend to grow bigger going a bit into over, it happened to her then you detach and it tends to discharge now we are at the moment that we are starting to give nitrogen again to then go into flowering. It is a process that must be nuanced very delicately. Ideally it is to start by preparing the soil with fertilizer and add if necessary. I over-fertilized the plants a bit but it's something I've always managed very well once I got to flowering. Next time we'll add some fertilizer to the soil with this technique it's very suitable. Wait for the uncle BreadandBuds.... We are always using soil, feeding and all the recommended additives from Plagron 100% organic, we have only lowered the amount of grow in this topping phase for the reasons mentioned above. ---- Decide on the right soil and calculate your fertilizer sheet based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy.. ---- https://www.zamnesia.io/en/11168-zamnesia-seeds-purple-urkle.html Zamnesia Description // A direct descendant of a Mendocino Purps phenotype, Purple Urkle is a high-performance cultivar from Zamnesia Seeds. This feminized, indica-dominant strain is sure to win over any cannabis grower. With a THC content of 20%, Purple Urkle has a lot to offer from seed to harvest and beyond. A grape-flavored adventure, Suitable for indoors, outdoors or in the greenhouse, Purple Urkle is a very resilient strain. Growers will be impressed by how easy this cultivar can be managed. Purple Urkle can reach 120cm indoors and 160cm outdoors, but if you want more control over the height you can use the LST technique. Purple Urkle has fantastic flavors and aromas that intensify during the flowering phase. Regardless of the method of consumption, Purple Urkle offers tangy, fruity flavors that lean towards notes of grapes, berries and plums. The effects of this strain are soothing and relaxing, with uplifting sensations that make the experience suitable for any occasion, whether in a social setting or alone. All the best that mother nature can offer is on ---- www.zamnesia.com

Another week went by, everything seems to be normal, except I think one of my darlings will be ready sooner. The one in the middle looks more mature if I look at the pestils, and the trichomes. The buda of her are also not developing that much, so I will keep monitoring her, because she might need a flush soon.

11/2: I flushed all 4 of them with 8 gallons each of warm water and liquidsoil. Won't be long now....👍 11/5: I put them in the dark....harvest tomorrow! 11/6: Harvested and washed all 4 of them. They are hanging to dry and smell great!

I used to grow gorilla cookies before, but then they broke it, and now it's back to the old gorilla cookies, which is excellent in every way 💪👌🤤 I don't know why I don't have an option to put how many dry buds I picked? but I picked 192g of dry buds

Planta esta reagindo bem ao LST e a poda top que fiz. Sendo automática acredito que mais uma semana começa a floração. Por enquanto mantive o fertilizante de vegetativo.

Day 37 - Hitting the ladies with a little LST. My cloner project took a bit of a backseat to life, so I'm a little late in the game to top these babies.... So I decided I'm going to do something I have never done before.... Let these plants grow naturally. Yeah, you read that right, I've never let a plant just grow out without some sort of fun training technique. Even my very first grow was riddled with aggressive plant shaping. This time will be different! This time I will be just doing some very basic LST to open up their branches to more light. I went in and stripped some of the inner growth sites that would have produced nothing but popcorn buds being so hidden from light. I then created anchor points around the grow bags by pushing toothpicks through the holes in the mesh. I like this because it gives me the ability to easily move around anchor points by simply sliding out the toothpicks and moving them where I please. I got the idea from seeing someone else use pushpins once, but I didn't have any on hand. And so, the toothpick hypothesis was born, and so far its working very well! Both ladies look much happier now that they're getting more light to their branches. The leaves on these Blazin' Skywalker plants are just so effing fat that they've been doing a solid job at blocking light to the branches. I tried doing some leaf tucking early on, but the branches just weren't quite long enough for me to properly tuck the leaves behind them and would constantly come un-tucked. I think we've found our happy place. 😊 Thanks for hanging with me, growmies! I hope y'all have a crazygonuts awesome day! ✌️💜🌱 Day 41 - Watered Maz with some 6.5 pH water. She had gotten a bit over watered so I let her go a few extra days between watering. The next morning, she let me know I did the right thing. 💜

Welcome to Flower Week 2 of Fast Buds Lemon Cherry Cookies Auto I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Auto strain Lemon Cherry Cookies : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 8 Weeks • Strain Info: 28,5%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 12 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Desgraciadamente el cultivo se quedó estancado en altura y demás. Estoy decepcionado pero la próxima saldrá mejor, no haré tantas podas y quizás cultive automáticas para cosechar rápido

One more week..

There was a drive by shooting 4 houses over they hit a neighbor 2nd story wall..ahhh my neighborhood is a war zone lol.. An i still operating behind enemy lines lol lol.. That's a good neighbor too.. .. Have fun Stay safe Growers❤️💯💯

[ Information ] For all grow information, including strain and room details, please see the first week of veg. [ Updates ] (Flower) Day 1 - Light intensity increased to 65%. C02 increased to 1300ppm average. Day temp/humidity 85/70 (1-1.2VPD), night temp/humidity 75/65 (.8-1VPD). Fed a diluted compost tea mixture before lights on. Base water was R/O and tap water mixed lightly with silica and Tribus microbes. Tea was a mixture of Fish Hydrolysate, Bat Guano, Molasses, Fulvic/Humic, Kelp, and Earthworm Castings. 8 gallons of tea were added to 72 gallons of water mixture for an 80gal batch total. The batch was mixed for a half hour before feeding to the room. I did not PH or PPM test the mixture, organic material is hard to get an accurate PPM reading so the numbers are useless to me. I will be working to bring the lights to 100% power over this first week of flower. Day 4 - Light intensity increased daily, currently at 90%. Will raise to full power tomorrow. C02 increased to 1800ppm average. Temp and humidity for day and night are still the same. Lights were raised slightly to maintain 12 inches from canopy height, and a few growth nodes that were above the canopy got topped. Watered today with an 80gal (1.25gal p/pot) mixture, 10% tap 90% r/o water. 6.8 PH, 2.2ec. Foliar sprayed yesterday before lights off with a neem mixture for weekly IPM. Canopies are stretching relatively evenly, though I will be adding in support nets within a few days to help maintain the even spread. I've run this strain before so I'm fairly confident that I know what to expect during these few stretch weeks. Day 7 - Lights have been at 100% since day 5. C02 still 1800-2000ppm on average. Plants are stretching quickly into the lights, I have yet to readjust their height. The best growth usually happens when I do nothing, and I've done almost nothing the past couple days besides enjoy the unusually warm spring weather my area is currently experiencing. Watered today, 100gal (1.5gal p/pot) mixture, <1ec. Mainly an organic feeding for microbe health, also wanted a bit more runoff than normal due to the high ec feeding previously.

IM SLOWLY MOVING ALL THE PHOTOPERIODS INTO THE 8X8 TENT. THEY HAVE BEEN IN VEG FOR TOO LONG AND STARTING TO SHOW ROOT BOUND SYMPTOMS, SO IM HOPING I DIDNT WAIT TOO LONG TO FLOWER THEM🙏🙏🙏🤞🤞🤞 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The stretch looks to be comin to an end. In the process of doin my last defol. Temps are staying in the zone at the moment. I think I'm in for a Shit show but fingers crossed. Maybe they will come fix the a.c. early or somethin...lol

She's doing nicely so far pleased with this pheno the structure is good , sadly she is only getting twelve hours due to photoperiods taking up space

THE REAL STORY ON LIGHTING FOR CANNABIS AND HOW IT MANDATES EVERYTHING ELSE.... MOST IMPORTANT VIDEO FOR KNOWING THE FACTS https://youtu.be/ID9rE5JewVg Today finishes the 5th week of 12/12 and 3 weeks of actual flower. Girls are looking real good. Gone on to feed, feed, water for the next week or 2. Fed the girls today at 800 ppm 1.6 ec the ph was 6.1 going in and coming out was 6.1 The runoff ec was 700 ppm 1.4 ec. Buds are still putting on lenght but their going to start swelling good soon. Their starting now. Length should slow now and bud swelling should take over. Going into the room actually burns your eyes from the dankness.... Can't wait. June 30th Girls are changing to put on bulk and weight now. Grabbed a lower bud for density check. Buds are pretty sticky and very hard. Going to be some good weight coming in the next 3 weeks. Wife came into visit the girls last night and went back out 2 minutes later saying her eyes were burning. Said, welcome to my world... July 1st Watering day for the girls. Ph 6.2 in and 6.1 coming out. Last feed was 800 ppm, 1.6 ec, Runoff ec after watering was 500 ppm, 1.0 ec These girls are asking for more food please and I will respond with 900 ppm, 1.8 ec next feed.. after the week of 1.8ec I will start lowering feed for the ripening process. Girls are putting on weight before my eyes now. Thinking my smallest girl will bring at least 5 oz dried. Branches are heavy already.

Unfortunately what we never want to happen has happened with my baby.. bud rot.. on day 98 of cycle I found 1 bud with bud rot, cut it off, checked the plant and could not find more.. flushed the plant and wait next day to see how it goes. After 2 days main bud was identified with bud rot too.. so sad.. probably due high humidity in my environment + colder weather we are starting to have.. so on day 101 harvest it.. could go few more days to get more amber trichomes but decided to harvest it to avoid lose more buds .. I will keep watching it to see if no spread when drying :(

Week 6 for this GreenCrack-in DWC hydroponique system🤘🤘🤘🤘🤘 💪if you apreciate hit the like buton😏😏 Yes you you