Likes
Comments
Share
Impressionante la velocità di fioritura delle dutchfem autofiorenti! Sono nel periodo di fioritura inoltrata e si stanno riempiendo tutte di infiorescenze dure, appiccicose e molto resinose e profumate, in giardino sembra di essere in un negozio di frutta fresca! Sfiorano il metro e cinquanta centimetri di altezza alcune e la maggior parte sembrano XL perché le lunghe diramazioni si stanno riempiendo tutte in ogni parte delle piante. Purtroppo il clima al centro Italia è un po' sfasato e ogni giorno alterna caldo umido forte con pioggie fresche brevi e poi ritorna il sole. Gli afidi stanno provando con tutte le loro forze a superare la protezione dell'olio di piretro, sono sotto le foglie gli afidi ma non stanno minimamente indebolendo il vigore delle piante anzi sembrano fiorire più aggressive e la resina inizia ad incollare ogni insetto parassita che sta tentando di attaccare le mie piante. Biologicamente queste varietà sono impeccabili e si adattano ai cambiamenti climatici e ai nuovi insetti parassiti resistono. Qualche lepidottero ha iniziato a mangiare qualche foglia ed infiorescenze ma non è un problema perché manualmente ogni giorno dedico un ora a rimuovere i bruchi. Dai video e foto si vede che non si scherza con queste varietà! Un abbraccio a tutti e forza Dutchfem auto in Italia!
Likes
Comments
Share
Exploding with growth happy looking so far any thoughts guys
Likes
8
Share
Week 11 She is having her last weeks now while fattening up her buds. Plant smells really nice and very strong to the fruity-peppery side now, I really like it. Some pistils are still white, so I give her at least another week. The color is really dark purple and gives a good contrast with the green. Really curious about how this weed is going to taste and smell when finally cured.
Likes
13
Share
Likes
4
Share
switched to bloom nutrients. Did extensive LST to pull the plant apart on day 30. seemed to do OK. main stem was very stout. nutrients at 215ppm on day 30.
Likes
25
Share
Beginning of week 10. At the point now, where I really need to start checking trichomes more closely. Some branches are clearly weeks behind, so I will be doing partial harvests. Planning on chopping the first part in a few days. (About 15% of one plant that was always ahead of the others). On day 65, I partially harvested one of the plants, I would have liked to wait longer but these were clearly done. Still most of the plant remains, will see how she responds! A few days later now. The now exposed buds from the partially harvested plant are loving all the new light, very glad I used this method. Nothing notable otherwise, all the rest are just packing on more weight by the day
Likes
67
Share
@Ageddd
Follow
It has been a strange week alternating rains and high temperatures... and in the garden all kind of bugs appeared like it is Spring :( In the last 3 days of this week noticed some leaves with aphids, and some powdery mildew but hopefully not touching the buds, as are covered in a lot of resin and thc, so gotta clean the plant removing all the afected leaves when harvesting and hash is discarded with this plant.. So... the Royal Cheese had to be harvested as soon as possible... but no worries at all as the plant past the middle point of the harvest window(as i say lol), with practically all the trichs milky. Would like to keep the plant like 3 or 4 days more until amber appearing, but the taste of the Cheese is better if you harvest earlier so it is all fine. The colas are so big, did not expect this kind of production with a revegged plant ( but she did not fully flower ), 3 months ago when the plant started to flower. The smell is insulting hahaha, it is stinking all the sorroundings... The neighbours probably are mad about it 😅 But they are kind, did not complain about it.. The feeding schedule: -Water-/-TopCandy-/-Water- Flushing: last 10-11 days until harvest Good vibes!!!!, next diary week will be Harvest
Likes
15
Share
Currently running a grow with a brand-new, unreleased strain from @supersativaseedclub. Here’s how the first two weeks have gone – really curious to see what’s next! Big thanks for letting me be part of this journey
Likes
16
Share
@Chaos85
Follow
everything coming along nice density being created benefits from the added cal mag can be seen even in the old damaged leaves turning out to be a great grow
Likes
7
Share
@Ninjabuds
Follow
Large golf ball size round nugs all equal size top to bottom
Likes
4
Share
It’s been a routine week of feeding,,after having a couple of late stretching branches flowering a week or so behind the majority of the canopy,,which has made me stop and think about cutting her food down yet,, and see if the late comers can swell quickly to catch the lead bunch,,,,,,chugging along,,,👍💚🍊
Likes
34
Share
This plant has started to grow like crazy. I really like the genetics that Canuk Seeds has sold me so far. Cindy99 has been a real piece of cake to grow. I went through her and removed a ton of foliage on the lower part of the plant. I also started to tie the branches off so that they are evenly positioned to receive as much light as possible. The canopy is starting to take shape and am looking forwards to flower this plant in a few weeks.
Likes
2
Share
@fabialien
Follow
Semana sel 9 al 14 de septiembre 2024. Vemos un desarollo bastante vigoroso en todas, esto también se puede adjudicar el hecho de la nutrición que han estádo llevando esta tanda se fem y regulares, la mandarine qué nació con apical va bastante bien.
Likes
198
Share
@DevilsBud
Follow
Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks All strains except imperium x/blackberry moonrock are topped and the main got LST clip on i snapped a Branch off one of the hyper glue by being to Hasty the other ones where no problem good week for the 9 plants A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
7
Share
@Stifler
Follow
The seed came to me as automatic, but it wasn't presenting the sex ....