Day 57: #1 has been successfully transplanted to a 10gal smartpot. We used ocean forest soil and happy frog mixed at a ratio of 1:3. It has higher p&K and were getting ready for flower Day 59: #2 is still in the 3gal pot of happy frog. She isn't showing any signs of nutrient deficiency or stress and because of size restrictions I think I'll leave her in this pot. Day 61: watered with real growers recharge today. 1st time watering since transplanting #1. And she seemed to be okay. We have decided to start watering every day and not for run off.i cant get a good routine and sometimes they get bone dry. So to avoid that we will water a couple cups every day and allow 36hrs of drought 1x a week. Day 63: Pulled the girls out for a photo OP tonight 😁 also we watered #2. Then we did a mild defoliation because the new optic 8+ arrived today!!! The entire tent is set for flower!! I will be starting flower tomorrow morning and also be taking clones from these girls as well so we can get some good info logged on how the Choc mint clones too! Week recap: 2x optic 8 LEDs for 1000 true watts 60%-70% dehumidity at all times 73°-83° tent temps all times Happy frog soil Real growers recharge Ac Infinity t8 fan with carbon filter Dehumidifier Several oscillating fans 8,00btu portable air conditioner

Harvest time I decide two hang the entire plant for a slow drying !! I finally removed the plant to much humidity it was around 80%😥 it’s raining hard those days anyway I checked every buds and no mold so I switched to my old method . 📦 humidity now it’s 55% 👌 5 days of drying I try to keep humidity around 60 and 17 degrees to keep all terpenes n flavour, terpene don’t like low humidity ,heat ,and of course lightning ,see y’a next update 💪💪💪 I had 34g of nice frosty trim ,for the first time I’ve made some nice bubble hash amazing I love it!!! I watch all of he’s videos he was the marster of hash RIP French cannoli 🙏🙏🙏

This grow has been sooooo easy apart from a slight bit of nutrient burn that you can see, she has been a pleasure to grow, she is taking longer than expected but i wouldnt have her any other way lol. Ive noticed that the pistils really turn bright orange even red 😁- i hope she tastes and smells as citrusy as she looks😝 - also getting frosty 👍 Merry Christmas Everyone!!😉

The tent is filling very nicely. In my neut section it says Tsp or ml….. I am using powder so I am using Sensi pro A&B 6 grams ea. Also with the Big Bud it is powder so I use 4 grams in the solution I am calculating for 2 Gallons (American product converted to eu) but adding more water the plants are doing really well. Started Overdrive this week this stuff really works the entire series grows awesome bud but Overdrive Pops those buds it really fills them out, it gives the buds weight makes them SOLID.

Last week I finally did some lollipopping and defoliation. I had too cause humidity went through the roof and foliage was dense and wet in the mornings. Also fed with the amendment. 5 liters of worm castings, with bone meal, some microlife. Some bud growth started but also trichomes are forming and a strong weed smell is developing in the tent. The growth is far behind compared to the other two though. Not as many buds and the plant is overall more flimsy and has hollow stalks. The very slender leaf growth leaves me to believe that next to being the runt all the grow, the gorilla doesn't seem to enjoy the high feed environment. It also really doesn't respond well to scrogging, it keeps reaching for the light, It remains the odd one out in the tent. The buds are few and far between, I'm not very hopeful this one will produce the grams needed to keep my grams per watt score high. The other two might well compensate for it, we shall see. Thanks for checking in!!

Its very frosty and I would say overall very good if you are looking for hash. I personally do not get much flavors out of it. I harvested 3 plants, flushed them properly, and dried them properly. All of that said, the flavor just wasnt there for me. I get a coffee aroma from its buds but definitely lacks flavor. I do not get any sweet notes from it like I should. This strain is strawbanana cream x do-si-do so I was hoping for a bit more flavor. I do not weigh wet, so final dry weight after a tight trim was a little over 6 ounces.

second week of flowering done. They were stretching like crazy. Installed a 3rd net to keep the stretch under control. Jumped from 35 cm to 83 cm in 2 weeks. They giving me some headache because of the hight. Should have send them 1 or 2 weeks earlier into flower. But it’s a lesson how to handle or not handle hybrids and sativas. Over all in was quite relaxing just adding water/ nutrients and doing some defoliation. So far so good. it’s quite easy to keep them on the same level with 3 nets. Still learning how to handle certain situations and conditions. But so far I am happy. They have got a massive need of Kalium at the moment. Should have given them more TA -Grow nutrients. But that’s party of learning. Really happy about the aeroponic setup. Really like the full control of the grow medium. (Compared to soil it’s easier for control freaks). Really water efficient compared to dwc/hydro/soil and changes made take effect pretty fast. Really nice oxygen supply at the roots and overall nice control possibilities regarding to roots and medium/solution. A possible downside could be that u can only use mineral nutrients and no organic nutrients. (We want some bacteria and fungus but not these ones that break down organic nutrients. That is more a preference thing than anything else. Good made hydro can compete with soil easily but most ppl put to much in there and ruin it any way. (Don’t want to trigger its good that everyone got its own style and evolves it in his needs and conditions.) The maintenance effort that is required for aero is a bit higher than soil and dwc but it pays off. (Personal opinion but numbers proof it) Looking forward to the next weeks and flower build up. Really excited about. Conditions of the Grow: 💡 PPFD: 900 umol/m2/s ☀️ DLI: 38.8 mol/day 🌓 Lightcycle: 12/12 h 💨 Humidity: 50-55 % 🌡️ 🌞Daytime Temp.: 22-24 *C 🌡️ 🌙Nighttime Temp.: 19-20 *C 🌡️🌱Leaf Temperature: 21 *C 🌡️💧Water Temperature: 19-20 *C Water TDS: 1100ppm | EC: 2200us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Vegetation Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container

The germinated seed was directly placed in the final 11-liter pot with BioBizz LightMix soil

Nachdem ich Banana Purple Punch RF3 geerntet habe, brauchen die anderen 2 Ladys noch etwas sich schick zu machen 😜

Flowers looking great… smell is incredible

Creció bastante y está formando sus cogollos, espero que se formen los cogollos sanos y densos.

10/10

Day 15 - The new week meant a change of water, nutrients and an adjustment of lights. Chong is looking like a short, but sturdy little seedling with broad fan leaves and big roots. Max is 10cm vs. Chong at 7cm and her leaves are perky and the stem is thick. They both look good for their own individual reasons. Looking at the roots specifically, Chong seems to be facing similar problems as Cheech in the Cookies Gelato grow - the aeration in the bucket appears to have “dead zones” because of the colour the roots and the manner in which they are sticking together. I’ve adjusted the air stone to be more central in the bucket and cleaned the air tubes because the nutrients stick on the tubes. Other than that, I’ve controlled the PH back down to 6.0 after the addition of the nutrients using the Milwaukee PH controller and decided not to adjust the height of the lights because there was only about 2cm growth this week. Also added the first wire to give Chong a bit of a better bend in her stem, gently starting off the process of LST. Day 20 and the ladies are getting closer to topping. Both are showing clear third nodes with the fourth node opening up. I am sure we will be topping during this next week of veg.

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

Experiencing what seems to be my first nutrient lock out. Bought a soil ph tester from homdepo its reading 7.0 so that what bring me to that conclusion on top of the slower growing and the slight yellowing around the leaves. I was being cheap and using the liquid ph tester that comes with the ph up and down and im regretting now seeing my plants in not the best condition. Im ordering a better ph pen today i used the vivosun one the i currently have got the water to 5.8 checked the run off and its at 6.2 hopefully that helps. Saturday im going to top dress and water at 5.8 aging and im thinking that should put me back on track Any advice i could definitely use some tips and pointers

Start of the bloom phase I got some nitrogen deficiency but I could handle the problem by giving them some extra nutes

5 agosto - 11 agosto 5 julho - feed day 8 julho feed day (biobizz) 11 agosto - only water Uma princesa incrível 😍

Blüten werden kompakter, ab jetzt etwas weniger Dünger ... Trichome werden langsam milchig .... Bei den kleineren Phänotyp Ernte vielleicht in 2 Wochen ?

9/13 everything's coming along nicely. They look a little hungry for nitrogen. Also showing signs of nutrient burn. Fed them more than I should be. Id like to note that these plants seem more sensitive to nutes than other genetics 9/16 I was right about them being sensitive too nutes. One of the plants is quite burnt by the looks of it. Both plants are extremely frosty though for how early it is. I flushed both plants 3 days ago and today, hopefully it evens out the nutes in the soil. Most of my grows have been with coco, I'm not used to having excess nutrients let alone any in the soil. Nonetheless these plants may be the most impressive ive ever grown In the resin production aspect

Week 24 (25-11 to 1-12) 25-11 Temps: 19.1 to 26.3 degrees Humidity: 44% to 62% Watering: Both 500 ml. 26-11 Temps: 18.6 to 25.9 degrees Humidity: 44% to 61% Watering #1: 500 ml. #2: 600 ml. Dry Weight #1 3.8 kg. #2 3.7 kg. 27-11 Temps: 18.5 to 26.9 degrees Humidity: 45% to 60% 28-11 Temps: 18.2 to 24 degrees Humidity: 45% to 61% Watering #1: 500 ml. #2: 600 ml. Dry Weight #1 3.6 kg. #2 3.5 kg. 29-11 Temps: 17.4 to 21.8 degrees Humidity: 52% to 61% Today is the first day of full darkness. Dry Weight: Both 3.9 kg 30-11 Today i harvested both plants, removed some of the big fan leaves, and hang to dry. 1-12 Temps: 16.7 to 17.7 degrees Humidity: 60% to 64%