Likes
Comments
Share
@BLAZED
Follow
Week 16 (16-6 t/m 22-6) 16-6 Temperatuur: 31 graden (licht aan) 23.4 graden (licht uit) Luchtvochtigheid: 50% (hoogste) 35% (laagste) De toppen zien er echt super goed uit, ze worden steeds wat vetter en ze zijn echt goed compact. Het ruikt ook echt heerlijk, als ik de top aanraak dan ruikt het echt super lekker zoet en mijn vingers plakken gelijk! Ik krijg gewoon water in mijn mond hahaha. Deze week geef ik haar al wat minder voeding, vanaf volgende week alleen afgezuurd water voor de flush. Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 0.8 gr Calcium en 0.25 gr PK+ PowderFeeding per liter. EC: 0.8 PH: 6.4 17-6 Temperatuur: 31.5 graden (licht aan) 23.8 graden (licht uit) Luchtvochtigheid: 52% (hoogste) 40% (laagste) Vandaag de lamp op 100% sterkte gezet. Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 0.8 gr Calcium PowderFeeding per liter. EC: 0.5 PH: 6.4 18-6 Temperatuur: 32.9 graden (licht aan) 23.8 graden (licht uit) Luchtvochtigheid: 62% (hoogste) 40% (laagste) Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 0.8 gr Calcium, 0.4 gr Hybrids en 0.5 gr PK+ PowderFeeding per liter. EC: 1.6 PH: 6.4 19-6 Temperatuur: 32.8 graden (licht aan) 24.5 graden (licht uit) Luchtvochtigheid: 59% (hoogste) 42% (laagste) Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 0.8 gr Calcium PowderFeeding per liter. EC: 0.6 PH: 6.5 20-6 Temperatuur: 32.4 graden (licht aan) 24.9 graden (licht uit) Luchtvochtigheid: 66% (hoogste) 42% (laagste) Ik weet het niet zeker maar ik denk dat ik een stuifmeel zakje zag en heb dat voor de zekerheid maar weggehaald. Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 0.8 gr Calcium en 0.25 gr PK+ PowderFeeding per liter. EC: 0.8 PH: 6.4 21-6 Temperatuur: 32.9 graden (licht aan) 24.7 graden (licht uit) Luchtvochtigheid: 71% (hoogste) 53% (laagste) Vandaag nog een stuifmeel zakje weggehaald. Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 0.8 gr Calcium PowderFeeding per liter. EC: 0.6 PH: 6.4 22-6 Temperatuur: 32 graden (licht aan) 23.1 graden (licht uit) Luchtvochtigheid: 76% (hoogste) 51% (laagste) Volgens het schema moet ze nu nog 1 weekje en dan kan ze geoogst worden, ik ben benieuwd! Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 0.8 gr Calcium en 0.25 gr PK+ PowderFeeding per liter. EC: 0.8 PH: 6.4
Likes
3
Share
Die Speed Queen purpelt ... und die Buds wachsen weiter - immer noch kein Dünger !
Likes
2
Share
@SamDo
Follow
Journal de Culture – Semaine 1 : Transplantation du Clone La culture démarre avec une bouture de Mother Gorilla (Royal Queen Seeds), prélevée sur mon pied-mère. Après un enracinement en douceur, elle a été transplantée dans son nouvel environnement de croissance. Bonne nouvelle : le système racinaire s’est bien développé, signe que la transition s’est faite correctement ! Cette fois, j’ai bien veillé à maintenir une hygrométrie stable à 80 %, ce qui avait été un souci lors de ma précédente culture. Pour ça, j’ai investi dans un humidificateur AC Infinity qui fait très bien le job. Côté paramètres : • Éclairage : 18h de lumière • Humidité : 80 % • pH : 5,5 - 5,8 (légères corrections à faire) • Température de l’eau : 18°C Pour l’instant, la plante est encore en phase d’enracinement, mais ça se passe bien. On va voir comment elle évolue la semaine prochaine ! J’espère que cette variété réagira bien en hydroponie. Hâte de voir la suite ! 🇺🇸Grow Journal – Week 1: Clone Transplantation This grow cycle kicks off with a Mother Gorilla (Royal Queen Seeds) clone taken from my mother plant. After a smooth rooting process, she’s been transplanted into her new grow environment. Good news: the root system has developed well, which means the transition went smoothly! This time, I made sure to maintain a steady 80% humidity, something I struggled with in my last grow. To help with that, I picked up an AC Infinity humidifie and it’s working great. Key parameters: • Lighting: 18 hours • Humidity: 80% • pH: 5.5 - 5.8 (minor adjustments needed) • Water temperature: 18°C Right now, the plant is still in its rooting phase, but everything looks good so far. Let’s see how she progresses next week! I’m curious to see how this strain performs in hydro. Excited for what’s next!
Likes
371
Share
D120. We have arrived at the twelfth and final week of this grow. Twelve weeks of flower is plenty, and the trichomes are starting to mature. In any case, I soon need to move the light into another tent, so chop day is almost here no matter what. ------------------------------ D121. I was going to wait a while longer, but today, I said fuck it and chopped the girls. They are now hanging in the tent, and there's an Inkbird controller connected to a humidifier and dehumidifier, keeping the humidity at 60%. Now we wait at least two weeks for the dry to finish. ------------------------------
Likes
9
Share
Close up of pistil hairs And only 2 plants for space and what not Check out YouTube video SuperSmoker for more!
Likes
3
Share
Well it is time to see what all my work will produce dry. 10 days in dry room then into the mason jars with a vivi cure can't wait. This grow I changed a lot from my water source from fox Alaska natural water to RO. Man was this a challenge. Not a single person I watched said anything about how unstable it is. To some research and problem solving to figure out how to stabilize it. Well if your wondering I added air to my AC infinity self wicking basin and set a timer to run 5 minutes on and 10 minutes off. I also went constant feed after week three. Will need to do some adjustments but it seems to be viable. More to come. See you next post
Likes
11
Share
@sweetkaya
Follow
Ladies' continuing growing stronger. They're fatten up the flowers now. I think we have a few more weeks to go. Can't wait to harvest 😍🤤🔥🙏🏻
Processing
Likes
10
Share
they grow healthy and strong, after the stress caused by the repotting has started to grow very quickly, it has really excellent genetics no problem encountered. It has an excellent structure with well distributed branches. But we will see all its potential in bloom as it explodes. After all, the gorilla and a very beautiful bitch.
Likes
18
Share
@CANNASIM
Follow
So far so good, we are at the 5 veg week, the hulk berry is shooting up many pre-flowers. The RO water has been great, using this clean water is much better and you see a strong difference, and you are able to dial the ppm/ec without the interference of random stuff plus the chloride and fluoride that comes with tap water in my region. This version of the Hulkberry i have is a bit more on the sensible side of things, se feels already if you keep touching her, also better not to nuke this strain with nutrients from what i have seen so far, so I’m going easy on her. The other two strains form Kannabia, one been the unstable version of Purpple Kush, got many aliens already out of some seeds, and ironically a Lucky dip, mystery strain is extreamely vigorous and nice to work with. A side from that i have chosen two HLG QB324 V2 quantum board with a Meanwell 320H-54a driver to build a DIY light, with passive Heatsink and 90 degree optics to power the flower tent, so basically i will move this plants to the other tent in a week or two when i get this build. This is a huge step up for me since i was using a generic Chinese blurple led. My setup changed a lot and i will try to keep things consistent, i may have some adaptation going on to drive all this new perpetual style grow.
Likes
10
Share
Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.
Likes
6
Share
@Flex1
Follow
Day 40 from sprout: The watering helped the 30gal out after 1 day. 3/30 and 4/1 i topped each plant and continue to tuck leaves. Some defoliation on the lower fan leaves that were touching the medium a bit. I will defoliate a little more this week. Scrog will come out in another week or so. I am seeing some canoeing at the very top of each plant. Could be a pH thing or from heat but chances are its a pH thing. I'll keep an eye on it and lower the water pH i am giving it if it persists. Gave the 2L pot some water (a little top and mostly bottom water) on 4/1. Medium was looking very dry on top but wasnt showing signs of needing water so i didnt give it much.
Likes
11
Share
Der KISS ist das Licht wohl etwas zu stark. Die obersten Blätter waren leicht nach oben gerollt und mir zu hell. Auch bei Lemon Orange konnte ich das beobachten, sobald der Abstand zur Lampe weniger als 40cm war. Ansonsten sehen die Ladies gut aus. Sonntag geht es dann wahrscheinlich in die Blüte.
Likes
153
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The flowers are in maturation, look already end approaching, I given only 1 time water this week, I check trichromes, 1 time per week, For moment almost milky. Maybe end in 2 weeks. 💧 Give water each 2/3 days. 1,5l Water + RQS Bio Flo Pack PH @6 - Bio Flowering Booster Pack Thicker Flowers 1,2 ml/l Bigger Flowers 1 ml/l Sweeter Flower 0.8 ml/l 💡Mars Hydro - SP 3000 100% 57 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light RQS - Epsilon F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/620-epsilon-f1.html
Processing
Likes
6
Share
Happy with whats going on so far only a 600 w led and I super croped week 3 flowering. Smell is fruity with diesel cant wait to try
Likes
15
Share
The summer is here. Black cream showing some colors but not what i imagine. But with out a dought some of the best buds i Have seen. Shes know senescence. Just let the lower buds get some power in 2 more weeks shes done. Im liking a lot the way CoshKush is going Very promissing branchs and a inner purple color to the picilis. Lets se as she fatns. Weeding Cake its looking like shes reduced grow speed. Like the tick piscilis now starting to go orange Bomberry looked so promessing in vege and now not so much. Late as allways.... Shes late but very hairy.....Promessing again :D Chear BrotherHood
Likes
4
Share
@mr_smooke
Follow
we pass 5. week, in this week i been spred my girls and make some defoliation. I had an accident when spreed but she doing just fine. grow nicely week by week. in next week i will flip them on flower mode. tent is ollmost full.
Likes
10
Share
I'm quite impressed by this week's development. The girls are starting to show their fatness. I did a flush at the beginning of the week and it helped a lot. Now I'm starting to give them less and less nuts, as they show obvious tip burns. They are getting so so packed with crystals!