Day100 Drain at 6.8ph ppm 750 drain Plain water given at ph 5.8

Repot to 12L Pot

Thank you. Gave her a cocktail to help with stress. Added 1st net for lateral support, not so much now, but for later. Blue light is absorbed by photoreceptor proteins called phototropins, which trigger a hormonal response that causes cells on the shaded side to elongate, making the plant bend toward the light. Try and fill this side a little. She is quite big already, just needs to find her stride again after the undue torture. 5 apex stems with 20-30 mini cola, let them develop a little, with the apical dominance shattered, all those 20-30 will all compete with each other as soon as that stretch is initiated. Key to a good stretch is making sure the plant is cycling efficiently, with large ATP conversions occurring lights out. For now, I'm keeping light intensity high. A plant will slow its vertical growth in very high light intensities, leading to a more compact form with thicker stems and leaves. This response is a protective mechanism against light stress, which can damage the photosynthetic apparatus and lead to symptoms like leaf scorching, yellowing, and brittleness. Instead of growing taller, the plant invests its energy into creating a more robust, stress-tolerant structure. Providing plants with necessary antioxidants helps protect the photosynthetic apparatus by scavenging reactive oxygen species (ROS) that cause damage from excess light. UV light exposure can impact the xanthophyll cycle by either enhancing its photoprotective role or causing damage, depending on the intensity and type of UV radiation. UV exposure can trigger the synthesis of more xanthophyll cycle pigments to increase the plant's capacity to dissipate excess energy, but it can also cause direct damage, particularly to Photosystem II, and may lead to a decrease in the de-epoxidation state (DEPS ratio) which indicates a reduced capacity to dissipate excess energy. Plants can respond to UV stress by increasing the synthesis of xanthophyll cycle pigments, such as violaxanthin and zeaxanthin, to improve their photoprotective capacity. UV-induced changes in xanthophyll cycle pigments can be linked to a plant's overall tolerance to high radiation stress. The xanthophyll cycle helps protect against photoinhibition, which is especially important when the plant is exposed to high levels of both UV and visible light. High doses of UV radiation can directly damage photosynthetic components, including the proteins, lipids, and pigments in the thylakoid membranes. Exposure to UV radiation can have a mixed effect on the de-epoxidation state (DEPS ratio) of the xanthophyll cycle pigments. In some cases, UV can inhibit the conversion of violaxanthin to zeaxanthin, resulting in a lower DEPS ratio and a reduced capacity for energy dissipation. However, the total pool of xanthophyll cycle pigments may increase, and this enhanced pool size could provide a greater potential for photoprotection despite a lower DEPS ratio. The xanthophyll cycle works alongside other mechanisms, such as the accumulation of flavonoids (UV screens), to protect the plant from UV-induced damage. Blue light repairs 100% UV-induced damage in plants through a process called photoreactivation, which uses a light-dependent enzyme called photolyase. This enzyme uses energy from blue and UV-A light to directly reverse the damaging pyrimidine dimers in the DNA caused by UV-B radiation, a key mechanism for maintaining the plant's genetic integrity. After carbon, light, water, temperature, and nutrients, the limiting factor of a plant's growth is often its own internal factors or the amount of a key ingredient. Chlorophyll concentration is one such factor, as the amount of this pigment limits how much light can be captured for photosynthesis. Other factors include chloroplast number, respiration rate, and the concentration of carbon dioxide in the atmosphere, as plants are often in a CO2-deficient condition. 60x60x18=64800seconds x 700 = 45,360,000moles. 45DLI Exposure to 165 µW/cm² of ultraviolet-B (UV-B) light for 3600 seconds = 1 hour, a extremely high, acute dose triggering stress responses and protective mechanisms. . The plant's photoreceptor protein, UVR8, senses the UV-B radiation. This triggers a signaling cascade that activates specific genes to protect the plant from damage. In response to the UV-B signal, the plant ramps up the biosynthesis of protective compounds like flavonoids, phenolic acids, and anthocyanins. These compounds absorb UV radiation and accumulate in the epidermal layers of leaves to shield inner photosynthetic tissues. The plant may increase leaf thickness or deposit more cuticular wax, creating a physical barrier to the radiation. The plant will produce more enzymatic and non-enzymatic antioxidants to neutralize the reactive oxygen species (ROS) produced by the UV-B radiation. The plant activates enzymes, including photolyases, to repair DNA damage caused by the UV-B. These repair mechanisms are critical for preventing permanent genetic mutations. While protective measures are activated, a high dose delivered over a short period can cause stress that overwhelms the plant's defenses. Photosynthesis is highly sensitive to UV-B. A high dose can inactivate Photosystem II (PSII), damage thylakoid membranes within the chloroplasts, and reduce chlorophyll content, which lowers the plant's overall photosynthetic capacity. Despite repair mechanisms, high UV-B doses can inflict persistent damage on the plant's DNA. One study found that acute, high-dose UV-B had a greater effect on genome stability than chronic, low-dose exposure. The overproduction of reactive oxygen species can cause oxidative stress, leading to the oxidation of lipids and proteins and disrupting cellular function.

Also muss sagen das Baby macht richtig Laune, sie nimmt sich den ganzen qm und geht noch gut nach oben. 💪😍💯

Thank you for reading I will continue to update once they are drying and ready for cure. I have cut down in jar everything the wait was 91 grams please consider that when they comes to my scale weight i wait until the main stem breaks with a loud crunch and the buds are really dry to the touch reason for it I have a very busy life and at the end of the day this is just a hobby so I cannot be opening those jars many times a day at most one in the morning and one in night so I want to avoid mold on them.so I push in a Boveda pack to keep them nice. After three weeks in jar that smell has incremented a lot be aware if where you are it's not allowed to smoke because once you open that bag or container everybody knows you open one of those buds it is incredibly powerful smoke and it is very very smooth great strain to have. Taste 10 out of 10 Aroma 10 out of 10 High 10 out of 10 . Night. strong THC. Yield 10out of 10. Taste 10 out of 10 Aroma 10 out of 10 High 10 out of 10 . Night. strong THC. Yield 10out of 10. thank you for reading have a happy grow

04/23/2022 I think lemon OG is done Give her a few days more, Biscotti Skunk, grape skunk about 2 -3 weeks out, the Biscotti Skunk has very strong camphor mothballs smell. Not quite sure what to think of her hope buds fill out well. Grape Skunk is doing a bit better but lemon og has performed best in my specific micro climate, others have more flowering to. If I'm going 63 days in flower it might as well be a Sativa variety.

Die Samen wurden vor 2 Tagen direkt ins Substrat gesteckt und mit calmag und ph angeglichen Wasser gewässert. Das nach 2 Tagen schon die köpfe raus gucken ist stark. 10.03.2026 Sie sind beide nach 2 Tagen aus der erde gekommen, so schnell ist bei mir noch kein Samen oben raus gekommen. 16.03.2026 Heute wurden sie in 1l töpfe gesetzt mit biobizz Light mir und mit calmag ausgeglichenem Wasser angegossen welches ein ph von 6,5 hat. Bisher sehen die kleinen super aus,bin wirklich begeistert.

New week so a couple new pics. She is a tall bushy wench. Tons of bud sights and man you can almost SEE these grow. Lol She is really getting big and fat buds everywhere. This is the fun part for me.

Vamos familia quinta semana floración de estás Pink Runtz de RoyalQueenSeeds. Que ganas tengo de ver el progreso de esta variedad, las plantas están marcando una deficiencia que estoy ya solucionándola aplicando los nutrientes necesarios, y estos días espero que recuperen el color. La cantidad de agua cada 48h entre riegos. Esta semana ya añadimos nutrientes de floracion estas próximas semanas veremos cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

18.12.2025 It won't last any longer for harvesting. She is covered by many trichomes and the main amount is milky already. I'm checking on her every day now and I think she'll be ready very soon. Her pollinized bud is looking really funny, like creating a second bud out of the first. Really unique to me. So, still in progress but not for too long! Looking forward 🌸

Growing how it is and its good.

Everything seems to be going really well for her at this point its just simple maintenance till she's done doing her thing , I can say that shes a good little plant and that I cant wait to run one of these again in 18-6 lighting to see the difference Ill get . Thanks for everyones continued support ! -Happy Growing!

El aroma aún no es tan descriptivo, pero lo poco que se siente es un matiz de vainilla y mantequilla con un poco de cítrico notable, pero sus resinas son un espectáculo para la vista.Con un color morado, su resina es algo muy bonito de ver.

I feel like this turned out better than it should have. Amazing genetics.

Germinating 3 Purple Kush Feminised seeds. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? Seeds popped today:-)transferred 3 Purple Kush seeds in to small pots 10/09/23 3 Purple Kush seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :-) especially if your seeds were expensive. 11/09/23 no sprouts above the vermiculite yet, i will check it again tomorrow. Today 2 Purple Kush Germinate and rise above the vermiculite 3 days after sowing. Purple Kush is going ok, it could be growing faster, unfortunately i can't upload new photos because there is a problem in the GD system, they are doing there best to fix this problem as soon as possible. GMO Cookies where started 16/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. 3 seeds sprouted, but only 2 survived, it become to hot and one GMO Cookie sprout died. I have now started another strain (Party Monster) 19/09/23 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours, 5 seeds of Party Monster have sprouted and are under the same 100W LED grow light. GMO Cookies have all come up above the vermiculite and are now positioned under a 100W LED, there is a small clip on fan blowing and circulating the air. This is my second attempt to grow GMO Cookies from 3 feminised seeds, i messed up on the first 3 seeds, i put them under a 250 Watt LED and it fried them, my folt. Growing from germinating seeds is a very delicate situation, your environment temperature needs good control. 2 Party Monster seedlings are looking good, coming along well under the 100W LED light. 3 GMO Cookies are looking good also under the 100W LED light. Plus i have now started soaking in glass of water 03/10/23, 5 Strawberry Yields fem seeds aka Strawberry Fields. filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 5 seeds will germinate by tomorrow? The 3 GMO Cookies fem seedlings are coming along well, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. 5 Strawberry Yields fem seeds have all sprouted and are above vermiculite, keeping them under the hood of a propagator, i have many mixed seedlings under the same hood, to keep seedlings protected from this relentless Spanish heat. Also positioned also under the 100W LED light, indoor temp 29 degrees humidity 65%, still to hot for seedlings to be directly under lights due to high temp in the room. 3 Strawberry Yields sprouts are doing well, gave 2 seedlings away, no space for all 5 plants, coming along well under the 100W LED light. 27 degrees humidity 55% good growing conditions Super Lemon Haze I began soaking 13 feminised seeds SLH since 27/10, after 24 hours soaking 11 seeds opened in filtered water in glass, also added 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed! 1 Super Lemon Haze fem seed planted in a 2 ltr pot 28/10, this is the only plant i will keep for flowering. The Pot is Half filled with lite mix compost, and the rest of the pot is half filled to the top with Vermiculite , watered planting medium thoroughly soaking it before sowing seeds 2cm deep in vermiculite. The seed will push through the vermiculite easley with very little effort, in effect encouraging a higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. And i planted the 11 remaining popped SLH seeds in the brown round pot, this is just to see how many will rise above the vermiculite from the 13 SLH fems seeds soaked on 27/10. I will give these away to a friend. Both pots have been placed on a propagating heating mat for consistent and ideal germination temperature until all seeds have risen above the vermiculite. Once my 1 fem seed has germinated! i will cover the pot with a transparen plastic bag and place the pot 20cm below a 100W LED light. Super Lemon Haze feminised seeds Seeds sourced from Satdica Bulk Seeds Soaked seeds 27/10 planted up on 28/10, 12 out of 13 seeds have transformed in to 12 healthy little seedlings. 11 seedlings will be given away to a friend, and i will keep the one seedling you see already planted up in a black 2 ltr size pot. Now positioned under my 100W LED light, distance 15cm above seedlings. Light cycle 24 hours. Keeping them covered with propagating hood for a few days longer to allow seedlings to become better established before removing the hood. The vents on hood are fully open to allow seedling to slowly become accustomed to the outside vege room space. Gelato Cookies 3 Feminised seeds Satdica Bulk Seeds Popped 3 Gelato Cookies Feminised seeds today 06/11 filtered water or bottled water in a glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. After placing on propagating heating mat for 24 hours. This resulted in increased germination speed! and today i can see little white taproot tails protruding out from the seed husk 👌 3 Gelato Cookies seeds, 1 seed in each small pot. Each Pot is Half filled with lite mix compost and Half filled with Vermiculite , watered planting medium before sowing seeds 2cm deep in planting medium. Spoon your seeds into it's planting medium, do not touch with fingers, spoon it in with half spoon of water and a seed, place the seed in the center 2cm deep in the planting medium, water it in again very lightly to help the seed settle into a comfortable position before leaving it to rest covered on your heating mat. The seed will push through the vermiculite easley with very little effort, in effect increasing higher successful germination rate, the compost will offer the first tap root an immediate lite nutrient supply. Watered and fed them in with Plagron Terra Grow 5ml to a ltr of water, i may have added too much, perhaps 2/3ml to a ltr of water would have been enough? placed 3 pots on top of a Propagation heating mat for correct germination temperature, position in a shaded place, and keep out of direct sunlight. This may seem like a lot of effort? and it is, but it will be highly beneficial by increasing a higher germination rate and higher amount of seeds will germinate from using this method :) especially if your seeds were expensive. 3 Gelato Cookies have come through the vermiculite, 09/11 and now they are positioned under my 100W LED grow light. I didn't expect all 3 seeds to pop, because 1 seed looked like perhaps not viable, because i only keep the bad looking seeds for myself and keep the best seeds for customers. I am keeping them covered with transparent plastic bags for a few days to protect them in case it's to hot in the 24/7 grow room which is 24 degrees, this is probably an ok temp for them? but i'd rather not run the risk. Romulan Feminised seeds Germinating 3 Romulan Feminised seeds 26/11 filtered water in glass, also add 3/5 drops of hydrogen peroxide, stir water well before adding the seeds, and stir again after adding seeds to water. I will leave it for 24 hours The seed coat softens by soaking your seeds in a hydrogen peroxide solution, allowing the seeds to absorb more oxygen. This results in increased germination speed Hopefully all 3 seeds will germinate by tomorrow? 27/11

🍼Greenhouse Feeding BioGrow, Bio Enhancer & BioBloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱GANJA FARMERS

Should flower now bit going to heavy defoliat, deap clean and lst for flower. Tried going another week veg... reached hight of 18" need to flip 4 days early...

9 plants, 5 different strains, 3 different seed banks. So yeah, some background info.. I was going to go 6 girls in 15l pots at first for even distribution but fucked up the germination process sticking them seeds eagerly straight to soil and some didn't germinate and some took almost two weeks to push above soil so I popped a few more and here we are. Oldest ones are about 6-7weeks old and the rest are around 3-4weeks.. not sure about exact days since I wasn't planning on running a diary but then again figured it could be helpful IF(when) running into problems. Been mainlining/topping/defoliating/binding when necessary to keep them at pretty much the same height before flipping the switch. First photos shown here are from the last session of high stress training.. now we're just playing the waiting game for them to recover and then it's off to flowering time baby! This week is the first time dem bitches have been getting the full recommended dosage of Bio-Bizz nutrients I still have available (bought the "try-pack" for best bang for buck.) Gonna run out of root-juice and bio-heaven after next watering but think that's ay-ok since we're going to flowering anyways and in the last grows haven't really seen any notable difference using the insanely expensive bio-heaven. Fucked up topping few plants taking "wrong" nodes being way too drunk but we'll see how it goes. Also start of this week is the first day I hanged Viparspectra V900 to accompany Mars Hydro TSW-2000 which has done an amazing job so far!😍😍 Using only the blue grow spectrum on the V900 for the recovery since I know from experience the bloom mode runs hot as fuck and I still need to figure out how to improve the airflow in the cabin without ruining good nights sleep. Day 3: After last trimming session Girls are recovering quite nicely. Watered today and just like I suspected ran out of root-juice and bio-heaven, the runtier Sunset Sherbet didn't get to taste any of that sweet sweet nectar:( Everyone took about the same amount of water (2l) with pretty much no runoff so boy were they thirsty. SS runt was having a little bit of trouble drinking since the soil was way too dry and had become a bit hydrophobic but with patience took it all like a champ. Had to remove some of the bindings to avoid snapping the stems but looks like they're still at pretty even height. OG Kush has a trunk thicker than my thumb already although she's less than 20cm high! Ditched the tower fan from taking up too much space and replaced it with Garden Highpro oscillating clip-fan which is like a frigging hurricane even at lvl1! Lets see how it affects the temps which are quite high after adding the Viparspectra: topping at almost 30c during the last hours of day and I'm not even using the red blooming leds yet!😐 Still giving them the full 4ml/l of bio-grow every feeding but I'm thinking about cutting it back a bit since ran out of the snakeoils and not sure yet does that affect the uptake in a bad manner. Been also foliar feeding them w/ bio-grow every second day with 1-1.25ml/l to keep the humidity at around 60-70% all times and they seem to like it, leaves are nice dark green colored. Realized just how tightly packed the tent will be so I'm going to put them into flowering as soon as they have at least 2-3 healthy nodes per branch so guessing at around start of the next week. Probably going to defoliate most of the leaf mass day before flipping the switch.. might even get excited enough to try schwazzing 1-2 plants since I've never tried that technique before and I really need to promote some airflow. Day 4: Well that lasted long.. The fan cut its lead wires loose while oscillating because the cable clamps were set too tight straight out of the package, not giving it enough slack to turn full cycle.. Goddamn it.. Seems like an easy fix but got no time to start tinkering before going to work so I'll get it replaced by tomorrow and hope I wont get a dud made on mondays. Cranked up the inline duct fan a bit to compensate the loss of airflow and temps are staying in the 28C range but there's definitely some hotspots forming.. hopefully that leads to nothing too serious.