Hello. This is the start of flowering for these Best Clones. I use the Critical OG and the Blackberry Moonrocks... Indicia's, for my medical needs. Found some spider mites and bought some predatory mites to combat them. See the pics. Took clones yesterday and flipped them to flowering last night. Things are going well in here. Next trim up is just before 3 weeks into flowering. OK. Keep Growing Straight. Chuck.

She is growing, nothing special.

2/20/22 I think I have everything dialed in for the most part. Trying to make sure this living soil is staying wet without water the plants too much. Think I need to up it a little, soil in certain areas is drying out much faster than others due to the light mostly. Lowered my light to 18" I felt deep down, maybe 5-6inches, the soil was dusty dusty dry. I am now actually watering half a gallon to each container around the outside with my garden sprayer. I make sure to get the top inch wet with a mist and then glob some water in there w/o sprayer nozzle 💦💦💦 2/21/22 noticed curling on bottom leaves. Did not change anything 2/22/22 noticing more curling, the beginnings of curling maybe on the second set of leaves 😕? I dropped the fan from speed 5 to speed 2 to hopefully raise the humidity. It's working and is now at a comfortable 57%. Not ideal but much better than 42% for veg 😅 2/23/22 noticing curling on all 4 plants on both the first true leaf sets and second (1 leaf and 3 leaves ea). I moved the light to 24", which is 33% further away and according to my $40 lumen meter, about a 28% reduction in visible light FWIW. Finally put up a little oscillating fan setup on a rudimentary iPad music-stand mount. It's loud as hell, need to look into a quieter fan lol 😆

Legends&Kush 2021 LarryBirdKush /5l cup water-osmosis0.5l+tap0.5l-ec0.3/6.5ph

* ********* Week 5, May 9 to 15, 2020 - Days 29 to 35 from germination ********** * We are calling this week 1 of flower. Definite signs of preflower on the girls. They are doing well in overcoming the transplant into plastic pots. The pH is still a concern and messing things up from a nice normal feeding pattern. They are nice and green though and will work through this all because they are healthy overall. They are a fair bit larger at the end of the week than they were at the start of the week😀 GSC flushed hard at the start of the week to help combat the pH which is still high. She was given over 40L to help lower. Sorry Fast Buds.......grower not setting this one on fire😞 Little more detail coming....... May 9/20 - Day 29 - 2L given to each girl with Massive, Dual Fuel @ 1.5ml, CalMag, Piranha, Voodoo, Rezin, Liquid Wt @ 1ml = 1000ppm and 5.1pH - Runoff numbers today: - GSC - 330ppm and 7.2pH - GSC2 - 335ppm with 7.2pH - the pH is not coming down as I expected.....WTF????? - flushed GSC in evening - GSC given first 18L at 5.6pH and next 16L at 4.7pH - run off only came down to 6.2 with 100ppm May 10/20 - Day 30 - 2L feeding for GSC girl with VeloKelp, Vitathrive @ 2ml, CalMag, Dual Fuel, Piranha @ 1ml = 650ppm and 4.4pH - let the pH low in feed as well, - GSC is 7” tall now. - GSC2 was not fed. May 11/20 - Day 31 - each girl given 1.5L of feed with VeloKellp, Rezin, Liquid Wt @ 1ml/L, Dual Fuel @ 1.5ml = 900ppm and 4.3pH - GSC2 has been a couple of days so she soaked up all the water. She is perky today....not bigger though - GSC is getting taller adn wider. He is looking really wide today. May 12/20 - Day 32 - dry out day - left them alone today May 13/20 - Day 33 - day out day - pots are still heavy. - giving them a second day off. May 14/20 - Day 34 - mixed 7L water with Massive @ 3m, Rezin @ 2ml, Liquid Wt, Dual Fuel @ 1.5ml, Rhino Skin, CalMag @ 1ml = 1075ppm and 5.3pH. - GSC was given 4L - runoff was 275ppm and 6.5pH - GSC2 was given 3L - runoff was 300ppm and 6.5pH - Things seem to be okay with the numbers.........pH is still a little high though. - GSC had lower growth trimmed to clean her up. - Starting silica today with Rhino Skin to help firm up the branches. - GSC2 is very small and she is set over to one side of the pot........no LST needed😂 May 15/20 - Day 35 - dry out day - tips are not up 100% so we keep working at it👍😃

two need another week maybe and the middle one looks like another two weeks. All three very frosty and stinky.

Watering every other day, using left over RO water from last feed with a little more phosphorous and potassium. and cal mag and fulvic and molasses added... EC 1.5 PH 6.2 Temp 20. Runoff was within 500 ppm higher than input (yikes). (still going for same input & runoff😒); its a dam goal ! These last couple of weeks seem to take forever. Praying to the ganga gods😇 that it finishes OK. March 29/2021 Brix is increasing, highest brix is 14 on 2 plants, brix of 10 on 5 plants, Brix of 9 on 3 plants, Brix of 8 on 1 plant, Brix of 7 on 1 plant.

12/12 + 28 jours Mon 1er Schwazzing !!! Photos et vidéos avant et après la defoliation 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 70% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 4x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 80% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan Sponsorisé par Mars Hydro

Think i'm gonna chop her down next week, buds lookin nice n frosty

D1. Three of them make it to 2cm in three days, the fourth one already rooted but taking it easy, I watered them a bit and covered the lazy one to blackout and see if she can do it 💪 Lighting at 8.5 DLI (100 PPFD@24h) with the lamp dimmed at 57cm from the soil. D2. The lazy seed still struggling to sprout but seems she's so close to make it since she's already out the soil. The three strong ones already grew to 4 cm in 24 hours, +2 cm, a growing rate of 0,83mm per hour. Following the seedling schedule lighting now will be at 12 DLI the whole first week. D3. The seedlings are growing strong except the little lazy one, I had to help her sprouting this morning using tweezers since both leaves were trapped inside the seed not being able to open by itself, unlike the other ones that did it by themselves three days ago. Will she gonna make it? Let's give her time 💪 D5. The red worms look very active but the leaf tips are curling up so I moved from 24h lighting to 20h and let em rest a bit keeping 12 DLI and 80% humidity while lowering temp at night from 25°C to 23°C. The lazy seedling still so small and definitely don't match their sisters growth rate, let's see if there is any progress next days. Also I already installed the Blumat, the parcel arrived missing the final drippers and the 3mm tube but they already send it. I adjusted the system following Michael Box top tip on this Growcast podcast, https://youtu.be/g5YFcxW3kXI?si=tkm6F1fF65CaNruq It consist on adjust the holding drip at atmospheric pressure without the ceramic cone/tube part, then from there screwed the regulator one more carrot (on gravity systems), mark it and put on the locking cap, this way it should provide 80mbar of water tension so there is no need to keep readjusting and you can leave it that way between runs. I use the Tropf max version expecting to keep the bottom of the 25L pots not so moist since 8 days later of the only watering done the moisture is still at 56mbar, looks like it will take some time to start dripping on. Meanwhile I'll keep an eye on the top moisture and if needed just hand water few mililiters a couple inches from the stems. D7. Today I received the missing parts from Blumat and this is the last day of the first week! I think they are looking good despite the little curled up tips from fifth day at 24h but lighting schedule is already changed down to 20h since fifth day midnight. Now they are 6 cm tall and look like they want to start vegging, tomorrow I'll start to daily increase DLI progressively until achieve 16 DLI by the end of the week. The lazy one seems to be doing it, very lazy but growing a little bit every day 💪

D56 - The first day in the fourth week of flower. She is definitely in late flower now with yellowing leaves. I checked her trichomes for the first time today, and I already see amber. Not a lot, but still. D62 - She is showing quite a bit of amber now, so I will cut her down in a day or two. I never experienced an auto that finished in such a short time. Two months is just insane.

Still in the HPS tent but now they are under the LED again and doing pretty well as the roots are filling the pots out they are eating faster. Did a couple foliar feeds with the Growzyme at less than 1 ML/Gal which they seem to like. Hoping to get a little more vertical growth before they kick into flower. Also been doing some bottom feeding which I have been experimenting with a little bit. It seems to increase rate of growth and the plants seem a little happier when I do a few feeds like that in a row. REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights

A lot more happening this week! As shown in the pics, and as suspected, I have a manganese deficiency. I've been keeping my pH level at 6.2 in coco, manganese is taken up best by the plant below 6.0 pH. Dropping my ph level to 5.8 pH, and flushing with lower pH, hopefully it will solve the issue over the course of a few days. I made a new frame for a SCROG, with a "custom bend" in the CPVC pipe on both ends. The bend will allow me to take advantage of the slack material in the sides of my 4x4 tent. I'd previously taken 4" out of all the upright poles to shorten the tent so it would fit in the room due to low ceilings, meaning I had extra slack in my tent walls. The bend in the net frame pushes the sides of the tent out to 5 foot wide. My first SCROG net was a 6" mesh from Amazon, immediately knew I wanted a smaller mesh. Next time around I built my own with a 4" mesh and used the 4" for several grows. This time I decided to go with an even smaller, 3" mesh, and already I like it better. I don't really see myself going much smaller than 3" mesh though. It seems to work well, and any smaller and it may be too tight trying to work the plant through the opening sometimes, which if not careful, will damage the plant. I usually use a & gal cloth pot, grow off rules stated we 0had to use a 5 gal pot. Seeing as I only had 7 gal on hand, I was stuck picking up a Root Farm 5 gal cloth pot locally, as you can see, the roots didn't really stay contained, nor did they "air prune", i had to tear them off before installing the net above. On the last day of week 6 I finally got my net installed, and the plant SCROGged. I should have put the net in place a week or two earlier, it would have been easier to manipulate the plant, however the plant will still have a week to recover. I tie the net in place above the plant, and slowly lower it down, as I bend and super crop the main stalk over parallel to the net, and work all the branches underneath and spread them out. As the plant grows I'll continue to push branches back down through the net and moving them out to the next hole. This will greatly increase yields by allowing light to more bud sites, keeping all buds the same height and thus the same distance from the light. small budsites on a vertical branch, will transform into their own cola once the branch is laid on its side. Instead of a Christmas tree type of plant, with one large main cola, and smaller and smaller buds as you move further down the plant, you end up with a bunch of colas that are all close to the same size, and more importantly, the same level of maturity. The SCROG method, combined with super cropping, and defoliation has greatly increased my yields. As the plant is getting worked into the net, I'll defoliate where necessary, ie a huge fan leaf covering bud sites, however for the next several weeks I'll be defoliating so mush every night or two, systematically trimming off all fan leaves, and stripping everything below the net, and any small bud sites that wont produce well. Usually by the time I'm half way through the flower stage there are no big fan leaves left to be found. It helps with light penetration, which results in a higher quality, higher quantity yield, as well as airflow, which will help prevent White Powdery Mildew and other molds etc. Once a fan leaf is 14 days old, its ability to photosynthesize light, starts to degrade. Once it reaches a certain point, the leaf drains more energy from the plant, than it's giving the plant. My best yields have been from heavily defoliated plants, my last grow I couldn't physically defoliate quite as heavily as usual, and I ended up about 25-30% less bud than expected

Nearly there !!!

OMG! (Oh My Growers) what an adventure we have here! Looks like in a few weeks we'll be deep in a zenzational jungle! 😍 They're definitely comfortable, I can notice the roots and mycorrhiza combo just taking over the soil. Leaves are branching out and getting think which is great to see, not as thick as I'd expected though. Next week they'll be transplanted to final 11L fabric pots. Happy Growing!

Hola . traemos un avance del seguimiento , no hemos tenido mucho tiempo para subir el contenido por un tema laboral pero ya empieza a relajar la cosa y podre estar mas activo con la subida de seguimientos . dejamos algunas fotos diarias de como va la floración.-

Getting ready to take clones and flip them into flower in the next few weeks

I soaked the seeds for 24 hours in a mixture of BioAg Ful-power, 6.3 Ph water & aloe Vera. I then inoculated the soil with the mixture of ingredients I listed above. After that I placed the seeds 1/4” into the soil & placed them under the humidity dome after spraying them with my pump sprayer. Current temp is 75 degrees F & Humidity is 89%.

Una planta que sin realizarle podas, ramifica muy bien, estructura típica de Índica, desde sus inicios en floración, genera mucha resina.