Processing
Likes
Comments
Share
@mrekansh
Follow
3 ml npk in 2 l water And given half of it! Plant seems to like it And pruning worked wonder! Leaves are healthy and getting much bigger in size! 15 cms+ excited!!
Likes
5
Share
No nutrients at this point yet as it is just a baby. Not even 7 days old 😀
Likes
2
Share
@Luke_Lee
Follow
——————————————— WEEK 9 / DAY 58-64 BLOOM WEEK 2 / DAY 8-14 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L fleece bags Light: 50cm Schedule: 12/12; PPFD: 875umol/m2/s DLi: 38mol/m2/d 20° C - 65RH 2L per Plant Hesi Bloom Complex (5ml/2L water) Hesi BOOST (2ml/2L water) PH 6,5 Fan, extractor and pump ON 24/0. ———————————————————— - DAY-58 / Bloomday-08 The second week of flowering begins. The plants are doing very well so far and are developing magnificently. They have gained a lot of leaf mass since the time change. The light has been adjusted PPfd: 875 / DLi: 38. - DAY-59 / Bloomday-09 Today each plant was watered with 2L of water with 4ml Hesi Bloomcomplex and 2ml Hesi BOOST. - DAY-62 / Bloomday-12 Today, at the end of the second week of flowering, the plants were little defoliated. They were then each watered with 3 liters of water with 2 ml HESI BOOST and 4 ml HESI Bloomcomplex. - DAY-64/ Bloomday-64 The last day of the second flowering week.
Likes
Comments
Share
Going to start flushing in about a week or so
Likes
10
Share
@4F1M6
Follow
Stretch is done and flowers are piling on now! I treated with lost coast as a preventative. I kept the feed the same but it will be altered end of grow week. Canopy is getting hella full can't wait to watch these colas stack on. Until next update. Happy growing and stay lit fam.
Likes
410
Share
It's been 68 days of flower now and they only got another week or week and a half left. I have been flushing them for 10 days now. Almost there 🤘🤘. I'm very happy how they have turned out, the color, the smell, the crystals 👍. Very proud of what I created. VERY IMPRESSED with the fc4800 and I was already very happy with the tsw2000 👍 The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Processing
Likes
42
Share
@Gabarram
Follow
03/12/2019 Day 81 The Dr seems to be concentrating in forming buds but I think she's grown some half centimeter, is she going to touch the ceiling? She has to know that is is confined and the sky is not the limit, at least in her condition. Day 82 (04-12-2019) The shoot at the rear left is almost touching the celiling of the grow tent😨 and i keep on tying other shoots and keeping them the farthest from the burning lights (many leaves' tips are scorched, but fortunately it's just the tip and the bud is still far from that hot point. Other leaves that are close to the lights, well, I took scissors and there's no need to speak further. Look the hard work I'm having with this plant height's issue. Goddammit why can't I have a normal grow like everyone? Day 83 just looking the video and the pics is self explanatory. No further comments 😒 Day 84 Ithe tallest shoot has reached the ceiling and seems to try to keep on growing so she needed to start bending at the very top because she wouldn't get past the tent fabric. Regarding EC, I am using a fertigation solution about 1,3 mS/cm and the runoff EC at 1.5 mS/cm. EC has been kept controlled since I raised fertigation volume to 6 L per fertigation event (1/day), unfortunately this solution containing nutrients goes to waste :( Day 85 07/12 I'lllst the tops that get to touch the ceiling and keep observing and acting as needed. I fear she'll stilll keep going up for a while. Fertigations as usual, got runoff EC 650 ppm today (1.3 ms/cm) which I think it's very good of a value. Day 86 (08/12/2019) Following advice I defoliated and even cut some thin and improductive shoots. Removed a lot of foliage and even supercropped a long tall shoot, I want to see how this high stress technique affects her. Because I plan to keep it doing if other shoots decided to continue growing. I wonder why do shoots continue growing vertical after having passed the light's level. Is it the glow coming from the reflective walls perhaps? Many questions. I decided to take down some tall shoots by suspending little weights near the tip, it seems to work more or less fine. Day 87 luckily the HST seems to have worked fine, the shoots are recovering and point upwards again. The main tip is quite unruly, today I supercropped that tip. Runoff EC is 650 ppm, perfect. Day 92 /14-12-2019) I think that despite her exaggerate growth she's managing to thrive fine with some limitations, buds seems going well. Shoots are still growing vertical but supercropping and resistance seems to have hampered her a while, but now I see she engaged on growing some centimeters more :/ Day 93 two days from starting the 14th week, despite the lights and the heat of this season (added to the lights I had to keep the tent door open for there was 32 ºC inside) the Dr is taking it well, I see the buds foxtailing as I expected, and I'm positive this grow will get to a good end. I'll work day by day to achieve that. Regarding fertigation, I gave her a solution half concentrated (relative to the solutions that I had given her the preceding days) because I noticed salt build-up by the EC measurements. I left run off EC at 800 ppm which is still a bit high for my liking but not excessively. For the amount of runoff I collected today, I see she seems to be drinking a little more.
Likes
3
Share
@Canadian
Follow
Despite the difficulty I had delivering light to this plant she still was able to produce a good amount of flower with a very good quality still not ready yet 4 chopping down requires probably 4 more days until I can start to weight them and jar them. I have been having all kinds of problems to be able to update my account but just wanted to mention that full weight after drying and curing is of 61 gram despite having such a hard time with light deprivation it really came through with beautiful nuggets with excellent quality. Smoke is very head high not so much anybody High but extremely potent and taste is somewhere in the a citric family.
Likes
4
Share
Number 2 pheno might herm on me so I have to watch but I have limited plants and I really want to keep these genetics so I need atleast one female. Number 3 the mutant stopped growing before I topped, or maybe not stopped but it threw out pistils at the apical meristem and not producing leaves so I topped to see if I could promote side growth but it hasn't worked; I'm going to keep her around just for the fun of it. 4 is my hope of producing female and a good clone.
Likes
141
Share
Update 4/4/2022 (Day 50) These girls are starting to get big! almost 70 CM in height right now. It's been a week since I flipped them to flower. and it's only today I start noticing some small pistols shooting out. Might have to do some more defoliation it's unbelievable how fast these are growing in this setup with autopots. I purchased 2 Fans before this grow and they both already lost the oscillating function. I will not recommend these fans (GHP PROFAN+ oscillating monkeyfan 25CM 20W) supplier also told me they had much complaints about these fans and they would stop selling them as of now. Update 05/04/2022 (Day 51) Big Cleanup day Last time Lollipopping mostly all the way to the top sites. Update 07/04/2022 (Day 53)) Starting to see some pistols not quit big enough to get a good picture of them. Other great news. I've participated a Mars Hydro contest on Instagram and I was lucky enough to be the winner!! So soon I'll be able to switch my Current TSW2000 for a new FC4800 Bar style light 😎
Likes
15
Share
Going out of town for a few days so decided to rig up an automatic reservoir top off system. So added a new 15gallon "pre reservoir" with air stones and a timer pump. Every 12 hours it will kick on and send 2 gallons to the main res, where there is a float valve to shut off at a high water level. Also the tent has a flood sensor if tripped will kill the power to the pre pump. Should be safe to leave for a few days.
Processing
Likes
26
Share
@GrowGuy97
Follow
All of the ladies are now starting to flower except the NHL I think it’s a little behind but all in all they are growing great! Day 31 - Everything seems to be going great, fed the ladies yesterday havnt had any more issues yet (Thankfully) thanks for following & happy growing friends✌️🏼🌱 Day 33- A few of the ladies have some dead leaves not sure if it’s normal or if something is wrong.. they all seem pretty healthy other wise!
Likes
16
Share
@IQuSX
Follow
Week showing signs of bloom! >> Has been applied: spraying ALG -A -MIC + trichomizer >> drooping and curled leaves >> washed with 25% solution >> see you next week💎
Likes
16
Share
On day 169 I did the final flush on both ladies. I went through about 6 gallons per lady. The final runoff measured at around 400 PPM. Right around where I wanted to be. In my previous grows I did not flush as thoroughly, I'll see if I can even tell any difference and if it's worth it. I started the 48 hour period of darkness of day 171 (flower for 72 days). I chopped and hung the buds on day 173. I expect it to take about 7 days for the stems to start snapping when bent. Wanda weighed in at 659 grams on harvest day with stems and leaves. Wilma weighed in at 731 grams on harvest day with stems and leaves. I am estimating I'll end up harvesting and jarring over 15% of the bud wet weight. So around 200 grams. I ended up trimming all the large fan leaves before I hung the flowers to dry. My hands got very sticky while just handling the stems and cutting leaves. Will update once the buds are dry and I've tried some of the bud. Can't wait!
Likes
6
Share
@Skunkstar
Follow
Flipped the girls fed ec 1.5 runoff was 1.7 coco drying back to half the weight of pot every feeding and started with the shogun boost hung the gavita 1000w se pro about 3 ft high and added another fan to the mix ph is around 6.2 on runoff im using a wet vac to clear all the runoff temps are around 26 day 22 night im looking to keep night time temps closer within 10 degree's diffrence for tighter intonode space there on a stretch looking to do some defolation usually I like to right before the flip and day 21 but I'm going for week after flip and end of week 3
Likes
17
Share
@olli0420
Follow
Super happy with this grow! I'll update harvest pics with pics of jarred buds💚 dosidos is a warranty as well as barneys farm 😍 I'll do it again for sure
Likes
20
Share
So this is how things are looking for the ladies at the end of Week 4 of Veg, I have uploaded a video for you guys with all the information, any questions just ask away 👍🏾🔥😎
Likes
6
Share
Likes
37
Share
@MG2009
Follow
10/13/2018 #1 still looking good, no fade. Start of week 9 of flower hope buds put on some weight this week should be 1 week maybe 2? Gonna be cold mid- week 38° on two nights. I know they can handle lower 40's without any problems but we will see in next weeks update,a cold tolerant sativa leaning girl is welcome hereCanfy #4 sweet fruit,and smelly shoes