I pumped up the bloom nutrients a little. As it’s my last week before I go into the flower stage. My lights will go 12/ 12 shortly. I added a wooden support system because the plant was slanted a little bit. I also removed clones yesterday. And the plant is healing very very well and fast. Lots of new baby nodes growing! took out the strongest two plants to keep as mother plants. And I continued LST as the plant keeps growing steadily!

04.04 • 48hrs Água - 1ml de água oxigenada V10 - Água mineral ph 6.79 - Escuro, 21ºC ~ 23ºc 06.04 • 72hrs papel toalha - Pote de vidro - Escuro, 21ºc ~ 23ºc 08.04 • Radicula visível 09.04 • Vaso 5L - Substrato Terrô Start 3L • 10.04 - Germinação

Started the harvest process. 😁😁😁Its a big one and is finishing in batches. Currently sitting at 11/31 harvested. Some are dry and getting jarred and sum plants still may have 7-10 days before they get cut. Amnesia fast from seedsman will b the 1st strain to completely finish. Just about to taste a bud before i start the cure and it looks 🔥🔥🔥 Flush flush flush

This week has been good both plants are growing great with no problems in there transition to flower they jus started to stretch so I hung the 600 watt lamp at 24 in and will lower it as they flower but a very productive week so far. Gonna add nutes at the end of this week so they will have some nutes to fall back on when bud sites appear

Exited for harvest 1 more week i think 😁

She’s a total beast! Gave her a little defol to remove some fan leaves blocking light to the lowers, also removed her from the block she was standing on as it wasn’t necessary anymore because she reached height. Now to see some flowers develop! 😊

Last week we noticed one of the ladies had begun to show sex. A couple calyxes with barely visible white hairs coming out of them. Seeing as there's no electricity where the garden is located we opted for a 1500 lumen LED lantern, that we turn on at 11:pm every night for about 40 minutes to and hour. This seemed to have done the trick as no more hairs have been seen and the vegging process is back on track.

Removed two fan leaves and I’ll start LST soon Here we are ! I start LST and I can’t wait to see her looking the light tomorrow

Il ciclo è stato veloce e veramente molto produttivo! E stata superata 3 volte in modo che avesse 8 cole principali, i realtà poteva prendersi un altra tagliata (per riuscire ad averne 16) ma non ho voluto farlo perche avevo un vaso da 8 litri, se avessi avuto un vaso più grande sicuramente avrei continuato a fare topping! E stato un vero piacere vederla crescere ho voluto farla crescere fino a quando avesse avuto i tricomi al 30ambra e 70 latte e così ho fatto! Ho controllato con il mio lumagny 100x e una volta raggiunto un 10ambra e 90 latte ho iniziato fare il flush (dando solo acqua ed enzimi per i primi 4 giorni e per i successivi 7 ho dato solo acqua. Quando ho controllato i ppm di scarico defluiva solo 380-400ppm (che era i ppm dell'acqua iniziale).... E stato bellissimo lavorare a questo progetto con tutti questi sponsor perché ogniuno a modo suo mi ha insegnato qualcosa è come potete vedere i risultati parlano da soli! Le piante non mentono MAI!😝 Volevo anche offrire l'opportunità a tutti voi di poter acquistare qualsiasi cosa voi vogliate su hempatianetwork oppure su bioponicagrowshop con il 20% di sconto basta inserire il coupon con il codice: CURATIDASOLO ed in automatico avrai il 20% su tutti gli articoli! Spero che sia di aiuto! La prossima settimana pubblicherò le foto del raccolto (veramente generoso pesata con tutti gli steli superava il kg!) Non voglio svelarvi adesso il peso perché vorrei conservarlo per la.prossima settimana come sorpresa per tutti voi quindi miraccomando STAY TUNED! 🌈🌱👇🏼

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Lst tranings return Day 35 Short Flowering 2gr/1L 1Liter Per Pot Day 40 Short Flowering 2gr/1L Booster 1gr/1L 1Liter Per Pot

This week went great, increased the nutrients and it looks like the plant is alright with it. Trimmed some of the leaves that were touching the ground from the LST, i expect that to slow the growth a little but it will make the watering much easier. Verry happy with advanced nutrients, this plant is growing faster that any other of my grows. The plan now is to let it grow outwards till flowering adjusting LST as needed. Then trimming everything that needs trimming, before letting it grow upwards and produce nice buds. Atleast that is the plant im aiming for.

Finaly !!! They grow, but still too weak to become something really good ... Cleaned bottoms at the end of the week. Quess all LST and training is finished. Plants small, branches weak, flowers VERY SMALL ... Ehhhh ... Next grow will be super, so lets finish that auto crap ... Thats how i feel. Took fish mix out, will take cal mag, silica acid and bio grow out next ... P.s. so i am sick and bored, so started to show some interest to girls , 5 days in bed is tough... After feed, water, i would do one more water, but this time i went for fat table spoon of molasses / 10 liters of water, plus extra cal/mag feed, some leaves are already showing sings of overfeeding, but plants so small, that i need to do something, ussually to do everything worse ;)) I will try to bump the feed for couple weeks as well. From next week all 2x ;) Have to take out all ec meters from shed, just not to poison girls and soil with overdose ...

04.11 F13 04.17 F20

I think it's nearly time for flush. I have added a fan in there to reduce humidity levels. Everything is blooming as fattening up really well. Can't wait!

Bueno, para no perder a nadie, el sistema que manejo es con dos indoors en paralelo. Uno en flora y otro creciendo la madre. A la madre la hago crecer hasta sacarle esquejes. Luego pasan al otro indoor, la madre y los esquejes, y ahí comienza la floración. Y ahí mismo comienza la nueva madre en el indoor pequeño. La variedad es de un banco argentino que no sé si sigue existiendo. Se llama "kali seeds" y la variedad es superhaze. Que en teoría tiene unas 10 semanas de floración. Día 01. Puse la planta para obligarme a terminar el prototipo. En este caso decidí usar madera de palets y algunas otras cosas que encontré en la calle. Ya casi termino todo, pero me falta armar los cierres. No voy a hacer puertas, dado que no está centrado, así que uso una tela de microfibra que ayuda a opacar mucho y era mas barata que el blackout. Ademas es impermeable y me sirve para un nuevo mecanismo de seguridad para fugas que quiero implementar. Es bastante simple, pero me soluciona mucho. Hoy no hay mucho más que mostrar. Cuando lo haya terminado voy a ir mostrando como va quedando. No me voy a enroscar con los tsp. Voy a poner lo que use aca. Ahora puse un litro de agua con un poco menos de 1g. de Feeding Grow de Greenhouse. Al menos por ahora, ya que tengo que comprar medidores porque los míos ya no dan confianza. Día 4. Ya estoy terminando de acomodar el indoor. Lo forré con refractario e instalé las "puertas" que en realidad son telas tipo blackout, pero mucho más finitas. Me falta terminar de ordenar la electricidad para que cada sector tenga su timer. Van a ser 3 timer diferentes. Por un lado van a ir luces y ventilaciones de flora (12hs). Por otro lado bombas de aire, bomba de agua y probablemente vientos de floración (15 min/hr). Y por último luz y ventilación del modulo de madres (18hs). Hice el cambio del depósito, a uno de 5 litros, ya que los próximos 10 dias pienso intentar mantener la misma solución (mantuve la proporción 1g/L de feeding grow). La planta tuvo un ataque de una plaga que fue a sus primeras hojas. Por suerte en el momento puse tierra de diatomeas y parece haberse detenido. Pero se pueden ver los amarillos en las puntas. No me preocupa, dado que en hidroponia esos problemas se resuelven y la planta se recobra enseguida. Ahora igual habrá que ir monitoreando, dado que me había olvidado de desinfectar el indoor, cosa que hice luego de este ataque. Tengo fé que llegando al mes y medio de crecimiento, ya esté en condiciones de cortar unos esquejes. Día 07. Por el momento el crecimiento viene rápido cómo suele ser en hidroponia. En unos días le voy a estar haciendo el corte apical. La ansiedad me viene ganando, pero sigo con fé. Esta semana tengo que comprar un par de aditivos y medidores que me están faltando. Pero ya está todo encaminado.

I think they are growing fine in general, but maybe a little overfert

Creciendo muy fuerte! LISTA PARÁ EMPEZAR CON LA FLORACIÓN 😝

Coming along Very nicely and i already harvested one blueberry 1 week too early but still a very strong smoke and pretty aggressive to the throat. Amasing strain from AMS every seed were pretty amasing one standing out tho and its very frosty.

3/13/2024 - Day 15 Flower: Ran into some issues after the last watering. The newest leaves have some severe curling going on, and I've had a few leaves with some minor brown spotting. I'm not 100% sure what caused it, but narrowed it down to either TeaCo Super Tea, Recharge, or the foliar spray I did with Dr. Zymes Eliminator. I did the foliar at lights out, but maybe there was still some residue when the light came back on. Either way, I'm taking it easy on this watering. Gave them 4 gallons of 6.5 ph water mixed with Jay Plantspeaker Quillaja, Coconut Powder, and a half dose of Rootwise Bio-Catalyst and Yah-Whey. The curling does not seem ro be getting worse, so hopefully they will grow out of this. Also, they have started to slow on rhe stretching, which is good, because they are getting close to the light. 3/14/2023 - Day 16 Flower: So I've been looking at some of the more deformed leaves and I'm pretty sure the leaf curl and brown is from the Dr. Zymes. The leaves with issues appear to have a slight glossy residue to them. I'm guessing when the Dr. Zymes dried on the leaves, it had a reaction when the light came back on. Now that I'm into week 3 of flower, I plan to cut out any foliar sprays, so hopefully I'm right an the issue won't get worse. I had some seeds that I sprouted and forgot to use yesterday, so I made a 2 gallon Sprouted Seed Tea (SST) and added some Jay Plantspeaker Quillaja, Rootwise Bio-Phos, and a half dose of Fermented Comfrey Extract and Fermented Peach Extract. 3/16/2023 - Day 18 Flower: plants are looking good. Flowers are starting to develop and I'm already seeing the beginning of some tricomes. Stretch appears to be just about done, so hopefully it will be smooth sailing from here. The curling from last week has not gotten any worse. 3/17/2023 - Day 19 Flower: watered about 6 gallons of worm tea I brewed for about 24 hours. Added some Jay Plantspeaker Quillaja, BuildASoil BuildABloom, and Rootwise Bio-Catalyst. Also, did some minor defoliation of some of the larger fan leaves blocking lower bud sights. Still need to do more, but I plan to spread it out over a few days. 3/18/2023 - Day 20 Flower: Cleaned them all up real good. Took off all the large fan leaves, except for the top two, and cut off basically anything on the lower half of the plant. May have gone a little higher than I would have liked, now that I'm seeing it done, but too late now. Normally, i only like to take off about 1/3, but i guess we will see what happens when the bottom half is stripped. Always learning around here, haha. Hopefully I should have very little popcorn buds.