Likes
Comments
Share
@Jsammy09
Follow
This was a pretty explosive week for growth! These girls really took off this week! I have been topping off the res with just plain RO water this week after the change and for this run I have kept the strength of the nutrients pretty low and have been hanging around 0.6 EC, I don't see much of a need to increase at all. I am going to continue to keep a lower EC and just watch the plants. I think last run I may have fed a little hot a time or two so gonna go low and slow this run and it has been working out so far. I will be putting my trellis net up either today or tomorrow because I think I am really going to need it this run. I noticed yesterday that it looks like these girls are showing signs of entering the flowering phase so I need to get set up and be prepared for the stretch! I'm getting a little nervous about the height of the plants as well because they are growing fairly tall pretty quick, but hopefully the net will help a bit. No issues to report really and they look healthy as can be! Thanks for stopping by and checking out my grow! As always any tips, comments, recommendations are always valued and appreciated! Thanks everyone you guys rock!
Likes
Comments
Share
@artems
Follow
During the initial two weeks of growth, Bad Guy by UKHTA Genetics encountered suboptimal conditions marked by low humidity. This environment took a toll, causing some leaves to exhibit signs of dehydration, notably curling and drying at the edges and base. Despite these challenges, the strain showcased its resilience, pushing forward with steady growth. Regular monitoring and adjustments are crucial to ensure Bad Guy's health and maximize its potential as it navigates these less-than-ideal conditions.
Likes
Comments
Share
@artems
Follow
During the first week of growth, The Scrooge faced less-than-ideal conditions due to low humidity levels. Despite this challenge, the strain displayed resilience, with new growth emerging. While the environment wasn't optimal, The Scrooge showcased its genetic potential, hinting at promising development ahead.
Likes
Comments
Share
@artems
Follow
At the 10-week mark of flowering for the Wapanga strain by TerpHogz, observations indicate it's nearing harvest time. The trichomes appear mostly cloudy with some transparency, suggesting it's approaching the optimal harvest window. However, the main cola continues to display signs of active flowering, prompting a careful approach. While the plant signals readiness in some areas, the continued vitality of the main cola suggests it might benefit from a bit more time to fully mature. Monitoring this balance is crucial, ensuring a harvest that captures the strain's peak potency and flavor profile.
Likes
Comments
Share
@artems
Follow
During the first week, Permanent Marker by Seed Junky faced challenges due to low humidity, manifesting in stressed, wilted leaves. Notably, the lower leaves began showing a purple hue. Despite these setbacks, given its lineage and Seed Junky's reputation, optimism prevailed. Implementing misting and environmental adjustments, the strain's resilience became evident. This purpling, while unexpected, added intrigue. With vigilant care, I remain hopeful, anticipating both challenges and the strain's promising growth ahead.
Likes
Comments
Share
@liliarose
Follow
She is growing great ! Started flowering this week, I did a flush after the pre flower and increased the nutrient intake for flowering now. Got a lil light burn so put the light a bit further away, dim is on 80% now. Tie down and partial defoliation did well in evening the canopy and not letting it grow too high, but more in the sides.
Likes
Comments
Share
@nijuana
Follow
Smell hardcore , also started flushing the chocolate Thai with 5ml/l of clean fruits , imperium X and fucking incredible need one more week with fertilizer , next irrigation I will reduce for the fucking incredible because of the senescence but continue for imperium X
Likes
Comments
Share
🗓️ 3° WEEK FLO // DAY 15-21 (from switch) // DAY 92-98 (from dry seed) ⚡- Light: 40 cm / 250 watt; ⌛- Schedule: 11/13; 🌡️- 22° C - 65% RH average; 📑- PH 5.9 - EC 2; 💧- #1 is drinking a lot! Love it! 😍 ✂️- A new big haircut for them on DAY 15 FLO. Removed most of the leaves and a some lower branches, specially on the #1; 🥅- Still bending the #1 branches trough the ScrOG-net; 🌱- Flowering is ongoing, they're pretty fine. Both are not stretching as I expected, maybe due the gradual approach to the switch. That's a good info for the next time but I would have appreciated a bit more stretching, specially on the #2.
Likes
Comments
Share
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D56/V49 - 10/01/24 🛠️ EC: 1.1 pH: 7.2 🌊 💼 Time lapse video 🧠 🚀 ________________________________ 📅 D57/V50 - 11/01/24 🛠️ 🌊 💼 Big Defolation and LST 🧠 🚀 ________________________________ 📅 D58/V51 - 12/01/24 🛠️ EC:0,9 pH: 7.6 🌊 Added water, bud candy and b52 💼 Added ScrOG net. Defolation and LST and Time lapse video. 🧠 🚀 ________________________________ 📅 D59/V52 - 13/01/24 🛠️ EC:0,9 pH: 7.6 🌊 💼 Time lapse video 🧠 🚀
Likes
Comments
Share
@PapaNugs
Follow
Great week inside this tent. The girl got her topping and then recovered over the week. There were already some good side branching and now they are being trained even more. Flipping to flower now. Lights at 40% power. Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
Comments
Share
@liliarose
Follow
She is growing nice, good leaf structure. Will LST next week.
2
27
Share
Eccoci al momento di raccogliere i frutti della bella Green Poison FV dei magici SweetSeeds 🐘💖
1
Comments
Share
Day 43: stretch phase is over, she grew fast in last week from 28 cm to 45 cm in just a 7 days. Now she's focused on fattening up her buds! I decided to feed her every other watering instead of every watering, but Cal-mag is must for every waterings! HST - Supercroping at day 47: these nodes went too high, so i did the thing! Please don't repeat this at home xD Day 48 plant seems okay, 2 of supercroped nodes are coming back! 3rd will be back soon as well! This plant can take any stress! This is the last day of the week, next few weeks we will see some flower bulking action😁
1
Comments
Share
@WSA_Matt
Follow
All plants have been chopped down now. Will switch over to harvest on here once these last plants finish drying. Then I can get a full harvest weight of everything. 2 weeks of curing for the first harvest. It is a very fruity smoke. Very sativa high but also a heavy body high. No sleepies or dry mouth. Really enjoying the strain. If I had to guess, I'd say we should be over 2 pounds.
2
Comments
Share
Hey GrowDiaries! What a week it’s been! My plant’s growth has been off the charts, reaching an impressive height of 96 centimeters. 🌿📏 Here’s the scoop: Burst of Growth: This plant's not just growing; it's soaring! Reached a towering 96cm in height. Feels like it's reaching for the stars! Bloom Phase Nutrition: Still on track with the bloom-specific nutrition. It’s all about giving the plant exactly what it needs during this crucial phase. Telegram Bot Tweaks: I’ve upgraded my trusty Telegram bot. Squashed some bugs and made it even smarter. Now, it shows the status of the automated watering system along with the usual temperature, humidity, and other vital stats. Alert Threshold Adjustments: I’ve customized the alert thresholds to match the plant’s current phase. If, for instance, the temperature spikes, I get a notification. Staying one step ahead! A Problem-Free Week: Overall, the week went super smooth, and the plant looks absolutely fabulous. It's thriving, and I couldn’t be happier. And a short update on my plans for next week. I'm gearing up for some tech tweaks in my green haven. 🌿🔧 Here's what's on the agenda: Calibrating the Soil Moisture Sensor: Next week, I'm planning to calibrate my soil moisture sensor. It’s a nifty piece of tech that uses capacitive technology. So, how does it work? These sensors measure the water content in the soil based on the electrical capacitance. Basically, the more water in the soil, the higher the capacitance. It’s like a mini superpower for understanding soil moisture! Dealing with Environmental Factors: The catch is, the sensor's readings can be influenced by temperature and air humidity. I plan to make some smart corrections to minimize these effects. The goal? To get super accurate moisture readings, unaffected by external conditions. It’s all about precision! With these tweaks, I'm aiming for a perfect balance in my plant's environment. Fingers crossed for a week of tech triumphs and happy plants! That’s all for now, GD. Can't wait to see what the next week has in store for us! 🚀🌺