Likes
Comments
Share
Tester FBPHP10 is a good plant to grow, easy going, fast growing, beautiful, fast flowering, frosty and quite tall. 😇 Down side: not mold resistant and terps are not really strong I had a lot of fun growing this variety! 💚💨 .. and smoking.
Likes
121
Share
Each 1L jar has exactly 28g, it took a long time to sort through this. I think I left them hanging for maybe 6-12 hours too long as the RH in a lot of the jars are below 55% (target is 62%). Some remedial action was taken, and I cut off small pieces of the main stem or trunk from the left over carcasses which has successfully brought the RH back up over 60%. The hash I made from dry ice and 160 micron bubble bags is on a whole other level, I have added a video close up of the pucks I made with a pollen press, almost 0 leaf matter! - This actually might be my new favourite way of smoking weed, hash on the common market is low quality and full of plant matter. I ran her low on EC for the entire grow, using the Botanicare KIND range. Max EC was about 1.8 - but averaged between 1.2 and 1.6 throughout most of the flowering cycle. This grow beats the hell out of my first, and I hope it wasn't just a lucky fluke! I ran the same lights, 2 x 315w Euro Style CMH fixtures. Royal Gorilla from RQS is next up, will be posting a new diary very soon 😊 Happy growing all and thanks for stopping by! 1.26 g/w this grow, or a more accurate way of looking at it: 1.07g/umol 😊
Processing
Likes
5
Share
@PETEROG
Follow
Hey everyone at week 4 know and wow have these girls grown early this week I applied some LST and all took really well to say it was my first time trying this
Likes
15
Share
Likes
35
Share
Venga familia, va la septima semana de vida y primera semana de floración de estas Frosted Guava de Zamnesia. Añadimos la malla de Scrog hace una semana, lleva una apical y ahora ya pude colocarla. Que color que sanas se ven como se nota que Agrobeta es de lo mejor, las niñas están de 10. La humedad está en su punto, y por fin puedo controlar la temperatura en 25 grados. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí es todo, buenos humos 💨💨💨.
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Likes
1
Share
Likes
20
Share
@B_Content
Follow
We are still smooth sailing with these ladies. All I am really doing is watering and maintaining my environment at this point. Keep humidity low around 45-50%. I do have foxtailing on 2 out of 4 of the cultivars, which is somewhat interesting. Based on the trichomes, these ladies are roughly a week out from harvest. They are packing on weight like crazy. I will say, the cultivar I chopped early seeemed like it matured much faster compared to these other 3. Either way, the tent is smelling very citrusy. Thanks for stopping by, commenting and liking! Until next week growmies! Reap what you sow and smoke what you grow!
Likes
47
Share
Bonjour à tous les padawans et maîtres jedis Franchement cette plante est magnifique J'arrose toujours avec 2 litres d'eau ph6.3 à laquelle j'ajoute la tablette rqs pour la floraison Je me régale!
Likes
17
Share
Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.
Likes
9
Share
Nous sommes proche de la semaine 2, il reste 3 jours ! Les filles se développent plutôt bien à mon goût, uniquement de l’eau et le programme luminaire respecté. On peut remarquer 2 phénotypes, l’une un peu plus claire en terme de couleur des feuilles et l’autre plus foncée. Évidement je suppose que la qualité des Leds compte.. j’ai observé par rapport à d’autre journal que la plante ne s’étire pas comme d’autre mais elles sont en bonne santé c’est l’essentiel ! À très bientôt pour la semaine 3 !
Likes
7
Share
@geegee
Follow
Very bushy ,not stretching at all ,basicly was node after node with zero space in between
Likes
21
Share
@DroDeluxe
Follow
This week the plants reacted very well to being moved outside. They are loving the natural sunlight. We planted a couple of dill weed close to them to attract some beneficial insects.
Likes
26
Share
Week 2 of flower is in the books and all 3 girls are looking extremely healthy. Perfect time to start packing on the weight. There are tons if bud sites that will get tons of light due to all the defoliation I've done. I've never defiliated plants this much before and I'm curious to see the difference in bud production below the canopy level. I love trying new things and experimenting with these plants. Always coming up with new ideas on how to do things and making things easier along the way. Can't wait to see how much I'll get off all 3 and see the difference in phenotypes.
Likes
10
Share
Over night soak with paper towel will update once we got action
Likes
41
Share
@ClubRiot
Follow
Start week 5 , Bio Grow 2 ml/L + Sensi Cal-Mag Xtra 2 ml/L + Alg-A-Mic 2 ml/L + CarboLoad 2 ml/L + Bio-Heaven 2 ml/L + Bio-Bloom 1 ml/L ( Ph 6.5).
Likes
49
Share
@Kayotic
Follow
Raised the light a few inches to try to get more to the middle buds. Also retied down a couple branches for the same reason. You can tell where the middle and bottom ones are not getting enough. That smell!! 💜
Likes
1
Share
@mauigrown
Follow
As week 5 came to a close and we move into week 6 of flowering, I am having really high hopes for the end result. The buds started to get some light orange hairs which is really nice and they are really starting to thicken up! Towards the end of week 5 the plants started to show early signs of burn on their leaf tips, so I started the week 6 feeding a little early. In week 6 we bring the EC down quite a bit as we get into the late stages of flower. I also recently switch to measuring with EC vs PPM for ease and accuracy. Also at the end of week 5 I did a calibration on my coco for each plant as week 6 nutrients are much lighter. Coco Calibration Method 1. Mix up nutrients. 2. Water plants as normal and measure runoff. 3. If runoff EC is not at or close to the inflow EC a. Water more and keep measuring runoff until the runoff is at or close to the inflow EC 4. Do steps 1-3 for all plants (One at a time) Tips: - I use a shop vacuum that I stick the end in the bottom of the pot saucers and leave it on while I water so it sucks the runoff as soon as it drains out the pots. Then I measure, empty and water again until I hit my targets) For this calibration, I ended up using around 6 gallons of nutrient solution. Watering technique used is to measure runoff at every watering and make sure we are staying as close as possible to the inflow EC. It does not matter how much water you need to put through the pots to get to the desired EC on runoff as that is a benefit of Coco. My main goal is to keep my runoff in check and the plants seem to do better than I have ever grown before! The smell off these ladies are amazing and strong. I don't have a carbon filter and enjoy her smells and aromas all day long as my desk is right next to my tent. There were no issues in Week 5. Plants continue to look amazing and the buds are continuing to bud up and structure very nice! I'm excited to see the end result after the ripening and flush stages. Also the colors that are soon to come! Stay tuned! ______________ We are 5 days into week 6 and the buds continue to grow fatter and fatter on a daily basis. I'm really dialing in my EC and making sure to mix it at 1.1 EC and making sure my runoff is from 1.1-1.4. I started playing with the mix as I am getting used to the grow schedule and how the base nutrients effect the EC. I have found that doing 50% of the low strength calendar hits me right at my target EC and I don't have to dilute my mixture after. The smells continue to be strong and fill my house up. The weight is starting to make the colas lean over which is nice because it's opening up the canopy to get more light in. I'm very excited to see what the buds look like in week 7 and then we are on to ripening stage, flush, and then finally harvest!!
Likes
6
Share
Harvest was easy for the plant, besides the fact that it was a monster and super sticky i can’t complain at all! Buds are rock solid and caked on with trichomes. Amazing results!