Starting to stack up

Day 14- I gave her first “real” watering, 500 ml of extremely diluted nutrient solution. This was yesterday, and she is not showing and angry symptoms…yet. I just turn her around once in a while when I am in my tent tending the others, otherwise, not much thought this week. I still plan to let this one stretch tall before I start any LST, if I do. Space is a premium, and I am looking to get a feel for how this cultivar grows, as I have lots of these seeds.

I would just like to so thanks to Sweet Seeds for this grow as it is sponsored, love you guys. Just germinating now and getting the tent set up for the new grow will update when i got to plant. thanks for popping by and keep your stick on the ice 😀 Update the little girl is just starting to pop above the coco

The new year has begun , and as they say, who first starts, sooner ends, fine! Sleeves up, it starts. 💪😎 This year I start with 2 boxes of 4 pots, 11 liters. After a year of trying light type soil, I start to use main coco, ,perlite and soil, with percentages equal to 80% ,20%, 20%. I previously wet the coconut, previously in a 9-liter brick with warm water, about 4 liters, with the nourishing addition of coconut a + b, put perlite, and finally the soil. Loaded the pots and immediately put to germinate directly in the pot. The box I will use is a mammoth 80lite, purchased 6 months ago, a great product, excellent workmanship, I do not pass a thread of light. As for the lighting I used a MARSHYDRO TS 1000. Is the best novice LED grow light, serving adequate light to 2-4 plants. Its reasonable price, marked yield improvement, and variable output control make it friendly to new growers. Wattage - 150w Veg Coverage - 2.5x2.5 ft Flower Coverage - 2x2. In this diary I will talk about Gorilla glue automatic. This particular and powerful strain was created by crossing Gorilla, Cookies and ruderalis genetics. This resulted in a genetic composition of 30% sativa, 50% indica and 20% ruderalis. Today is the first day since I planted it, from this morning to tonight it came out completely, a small stem with its primordial leaves. the substrate is quite humid, it does not require any addition of water for the moment, the humidity is about 77% with a temperature of 24 degrees with the lights on, 20 degrees with the light off. In the next week we will see what to do. Thanks for reading, if you like, leave a like or a comment! TO NEXT WEEK!! 😎🤙

Welcome to Flower Week 4 of Fast Buds Z-Up Auto I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Auto strain Z-Up : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 8-9 Weeks • Strain Info: 29%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 12 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Starting week 7. Still using Bio Bizz schedule and she's going fine. One week later cause I forgot to update the diarie. Tommorow, new update.

These took off finally. Two very distinct differences here. 4 total. 2 look exactly the same. 2 runts looks exactly the same. Turned light up to 60% at about 3 feet. Grow under the MEDICGROW Smart-8 760W beast here. RQS Orion F1 Hybrid Auto in a DWC set up Athena Blended Line - awesome nutes. Can’t wait to see what they can do in hydro. Check out MEDICGROW website https://medicgrow.com/ Really excited to see what it can do I’m flower. Love the Bloom button which increases red spectrum when wanted/needed… Currently running at 40% Official Website: https://medicgrow.com/ Facebook: https://www.facebook.com/medicgrowled Twitter: https://twitter.com/medicgrow Instagram: https://www.instagram.com/medicgrow420/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow

Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm

On day 1 the rez is at 6.2. The highest cola is 8.5" from the light. On day 2 the rez is at 6.2. The highest cola is 7.75" from the light. On day 3 the rez is at 6.1. The highest cola is 7.5" from the light. On day 4 the rez is at 6.3. The highest cola is 7.125" from the light. On day 5 the plants are smelling and doing well. On day 6 I changed out the rez and PH to 6.1. The highest cola is 7" from grow light stretch is deff slowing down and should be over shortly. My avg PPFD at canopy is around 800. On day 7 the rez ph is 6.0. The highest cola is still 7" away from light 😅 close but not too close in my small space.

Doing very well after repotting her 😍❤️ Very good and strong quality seeds by @supersativa seed club Try them outt

Die Woche ist sehr gut verlaufen nun ist der elfte Tag Blüte Sie scheint sich von den Larfen beziehungsweise Trauer fliegen Erholt zu haben die Blätter stehen wieder schön und sie ist sehr stabil leider ist mir ein Kopf abgebrochen ja ärgerlich aber was soll ich tun der Geruch kommt auch langsam durch es riecht ziemlich gut die Härchen sind schon zu sehen. Da ich Bio Grow Habe ich in der ersten Woche 8 g Blumen dazu gegeben und die reichen bis zur dritten Woche oder sogar bis zum Ende der Blüte in Enhancer habe ich diese Woche nicht benutzt

I just harvested her today. Frosty looking nuggets with a pine citrus earthy aroma. Super sticky as well. I had about a 5 to 10 percent amber trichromes. I might of been a pinch early, but she was starting to foxtail. The colas look really nuggy. I had issues with mites early when I switched to flowering. This likely impacted some of the yield potential as she was neem oil treated for a week during that time. She did way better then I expected after that big stressor in play. Mites are long gone now. The plant will now hang dry 24 hours then get a light to mild agression wet trim, and end up in the cannatrol. To start a 8 day dry, and cure process. I will then run it in the bud trimmer. Then hand trim to finish. The G3000 light is a great quality light. I just ran it 19 weeks on a photoperiod grow, and had no issues with any of the Spider Farmer Equipment used. I used the 2.3x2.3x5tent, G3000 light, germination mat, 4 inch inline smart controller exhaust fan, and I will be using the new 16 inch Spider Farmer bud trimmer bowl when time comes. Excellent equipment from start to finish in my grow. I want to thank Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻💪🏼❄️🌱 I also want to sat the biggest thank you to the grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)

The harvest is coming soon also for Strawberry Gorilla and Orange Sherbet, news this week the strawberry pie has grown, who knows if it will make buds full of resin or seeds, maybe both? We will see! the story continues...

🙏 Big thanks to Plagron and Zamnesia for putting on the Eternity Grow Cup 2025. This kind of platform means a lot to the community. The chance to push our grows, test out new techniques, and connect with other cultivators from all over has been inspiring. Appreciate the love and effort that went into making this event happen! Hope everyone enjoyed looking over my shoulder on this grow and best of luck to all participants! REVIEW - Runtz (fem., photo.) from Zamnesia: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ The seeds from Zamnesia germinated rapidly, rooted strongly, went wild in veg, and produced an ample amount of high-quality medicinal flower. The diary speaks for itself on that front so this space will be more of a phenotype review. The plants were labelled A, B, and C from left to right respectively in photos. A and B were the 'clasicaly-appearing' sativa-esque leaves while C was the more 'indica-appearing' phenotype. Although A and B appear the same qualitatively, they did produce substantially different amounts of flower (despite their DLI being near max out for the entire tent footprint without supplementing CO2, so I do not think just being in the middle attributed to this). Past their different yields, A and B also have vastly different profiles. A is a classic gelato/ice cream cooler/Z terps, and my personal favorite of the plants (wish I had taken a clone of this one instead). B is the most on point for what I think of with Runtz, classic Z terps but with a slight tropical/rotten/sweetness to it. C had the misfortune of being ready to chop a little earlier than the other girls so her profile is mostly just spicey kush now. I did observe intersex flower sites but given the entire context of the diary and how the plants performed, I have to assume it was user error. No pollination observed in any of the flowers, as zero additional intersex sites occurred. The distinction between A, B and C is what I would expect from a typical F1 cannabis seed. I do not enjoy growing from seed much but these girls were manageable. Add to that the relative stability of the genetics for a Runtz recreation, and well, these are good quality beans for a great price. Not only is Zamnesia responsive and available, their confidence speaks volumes. How many vendors would have an in-house Runtz, knowing how much of a genetic-gravity-well it is in, and be confident enough to let ~200 randos grow it and show it? REVIEW - Green Sensation from Plagron: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ I enjoyed using the green sensation, the NPK values on it make it versatile in application and a power-house in flower. I can't say I noticed anything better or dramatically improved, although comparing to Heavy 16 and asking for a marked improvement is big ask in my opinion. What I was able to do was seamlessly integrate the Green Sensation into my current routine. The additive stayed homogenous, was easily introduced into solutions with no adverse impact to the water contents or pH. Most importantly, the plants enjoyed the additive and it did accomplish the main goal of being able to wane off your primary line. In this respect, by using Green Sensation I was able to save resources by lowering my Heavy 16 inputs across the board approximately 50% and supplementing with Plagron's Green Sensation.

420 Fastbuds Week 1 Gorilla Zkittlez Auto Hey hey what up grow family. Started another couple seeds from 420Fastbuds of this amazing looking strain Cherry Cola Auto. Germination started on 9/21 and 48hrs later after soaking in a glass of water they where put into the soil. Fast forward 48 more hours and we have sprouts that appear to be healthy. All in all Happy Growing

Girls are doing great. Im getting great air circulation and it is doing wonders for them. Going to defoliated next week for better light penetration

4/20 Still having trouble getting seeds to grow! 4 out of 6 seeds from the initial pop have died, so I've popped one more Chemdogging and one more Sour Diesel. Placed the popped seeds directly in the pot they'll stay in for the whole grow per suggestions. Built a 30"x36" trellis out of 3/4" PVC pipe, will install a double trellis netting on it once I set up the Blumat watering system. Also added in a smart power strip that now has built-in timers I can control from my phone. Organized all my extra grow equipment and cleaned up the room! The little pots in the photos are some random seeds I'm starting off in here to give to some friends to grow outdoors. 4/25 - sour diesel popped up today! 5/2 Still no luck getting the Chemdogging to sprout, currently waiting on C-dog and a Blackberry auto to sprout in my other two pots. Set up some random plants from seeds I found in a bag of Black Lime and Cookies, put them in a separate room to flower so I can find out if they're female.