Yoooo! Welcome back 🙌🏼 Just a quick update for week 7 of flower. Plants looking incredible. Zkittlez is really packing on the frost now and starting to develop some lovely colours. The Runtz seems to be continually packing on size and developing - most of the trichs are still clear but I’m seeing cloudy and a few amber ones here and there, so I’m looking to get the flush going in a few days time. Thanks for stopping by! Cheers 🤟🏻

The enormous growth and bud development this week is unbelievable. This strain keeps pushing and pushing, I can see already that these plants will be covered in bud. Also, these plants are in size what my previous photoperiods grow in 8 weeks and some flowering. Really amazing to see. So far my experience with autos has been meh at best. These plants are nothing like that and are resilient and forgiving. The Mars Hydro SP-3000 is now on full blast, it gives me some white pointies and the temps go up in the tent. I'm on the threshold of heat stress and light burn. I'm trying to push it maximally and to get to know the boundaries. Thanks again for checking out my grow!

Flowering day 68 since clock change to 12/12 Hey guys :-) . It's so far, the lady is ripe and will be cut at the bottom end in the coming days and hung upside down in the drying tent :-) . Next week there will be an extra update on how they are hanging. Watering would be done twice this week with 1 l each (nutrients see table above) Otherwise it was checked and everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Last week of flowering and will be cut !!! Very well formed by dense heads along the branches. I just cut one top of the plant and it gave very good results! I smell the fruit! I have made some flush due to nutrients that i gave during flowering...💪

Hi

Welcome to my Apricot Auto Diary sponsored by Fastbuds & Xpert Nutrients. Day 57-63 Week 9 Last of fattening & some of ripening left of this stinky colorful gem. Possibly the best auto I've done from Fastbuds. Plant reacted really well in her fattening stage. This is her last week. Just sugars/sticky fingers & enzymes. 450ppm. Still drinking good. And will let her finish up with what's left in the pot. She is stunning as is. Nutrients Pult off everything except sugars, and enzymes. 450ppm (no NPK ppm) ph from 6.1 to 6.7. 15c 700ml. And then just water, 700ml a day, slowing down to half that on her last days. DLI 49 959 ppf over 13hrs. Lowered from 55+. Harvest after 24hr dark rest. Thanks to my sponsors Fastbuds & Xpert Nutrients. Much appreciated to all my viewers. I look forward to seen your diaries. Either way thanks for dropping by. DISCOUNT CODE FOR XPERT NUTRIENTS CODE:GGST 20% OFF.

FBT 2308 is growing great under the Medic grow mini Sun-2, and in the Agrogardens nutrition. She had her first lst today. Plus she had a good root pruning. She is looking really good so far. Thank you Medic Grow, Agrogardens, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Bring em on home! Mostly plain water and some molasses til the end

8/10 Monday. 12:05AM FULL RETARD MODE ACTIVATED 8/10 MOnday - looking good needs water will ask Grok: For your Fast Buds autos (RF3s + Mendo Frost) at roughly week 5 in coco, target an incoming EC of about 1.2–1.6 mS/cm (roughly 600–800 ppm on the 500 scale). 8/11 4:30am 550 PPFD is solid for where those plants appear to be. Looking at the photo, you’ve got a clean, well-organized Spider Farmer tent with healthy-looking plants in fabric pots (plus the smaller one in the white pot). At 45 W per light (90 W total) and hitting ~550 µmol/m²/s, the efficiency is actually pretty good — modern diodes can deliver that intensity when the lights are relatively close and the footprint isn’t oversized. Quick context for that PPFD • Current stage (looks like mid-to-late veg on most of them): 450–650 is a strong sweet spot. You’re right in the middle. • You can push a bit higher (600–700+) if you want denser branching and tighter internodes, but 550 is already productive and lower-stress. • Once you flip to flower you’ll generally want to climb toward 700–900+ (depending on how the plants respond and whether you add CO₂). A few practical notes • Height & uniformity: At only 90 W total, the distance from the canopy is doing a lot of the work. If the outer edges or lower plants are noticeably dimmer, you may need a slight height adjustment or to rotate pots so everything stays even. • Heat: 76 °F and 48 % RH is comfortable. With only 90 W you’re not fighting heat. • Dimming headroom. The plants look happy — good color, no obvious light stress or stretch. You’re in a good place. If you want to share the exact model of the lights or the tent size, I can give more specific height/PPFD targets. 8/11 2:29PM these lights are so efficient and so good that I had to turn the electricity back each light is now down to about 40 W each so 80 instead of 90 Ish. I didn’t check the PPFD rating so I don’t know what the light measurements actually are, but I know keeping them at 40 each so a total of 80 W is very good. I raised the lights out there about 12 inches maybe a little bit more about 14 inches high off the top of the plant but doing good so far my EC was 1004 on whatever scale that is I’m using from 900 to 1.2 is what was recommended for EC. 8/ 10:48 AM I don’t really remember how to use those art supplies but my plants are starting to look nice and bonsai. One of them will be shaped like a snake. It’s gonna look really good and self supporting. The other ones are pretty good. These are gonna be a nice decorative grow. I should get a lot out of them too starting to flower fast buds always has the greatest staff. I mean there their plants are always the best. They respond so well to everything, especially all my mistakes they always recover. 8/13 12:47AM The two that are a touch pale are probably the ones you’re noticing. In coco that’s usually one of three things: Mild nitrogen hunger (common once they start really taking off) Cal-Mag demand ramping up (especially under LED) Or just the natural variation between the RF3 and the Mendo Frost phenotypes A light Cal-Mag bump or a small nitrogen nudge is the smart move. Don’t jump on it hard — just enough to bring the color back without pushing them into dark green and locking out other things. You’re already dialed in enough that a gentle correction should fix it quick. 👻👽 Your light setup is the real story though. Running two Mars Hydro TS1000s at ~40 W each instead of one at 80–90 W is a classic low-heat efficiency play. Same total photons, way better distribution, and almost zero heat load. That’s why you’re getting this kind of growth with almost no thermal stress. The plants are loving the gentle, even intensity. Dropping from 45 W to 40 W each was the right call — 45 was just enough to start pushing them. 👻👽

Day 35 – Vegetation This little one is struggling a bit after being overwatered. The leaves are drooping heavily, and some lower fan leaves are starting to yellow and fade, clear signs of too much moisture in the root zone. The canopy is still intact, and new growth looks like it will bounce back once the soil dries out. For now, I’m holding off on any watering until the pot feels nice and light. Increased airflow with a fan and a slightly warmer environment should help the medium dry faster. No signs of pests or severe damage yet – just giving her time to recover. Once she perks back up, the plan is to resume light feeding and gentle training to keep her on track for the upcoming Stage.

High GD community, Week 29, All i harvested was much to early, and had some mold in there while drying, so yield is very low. These popcorns i let go an other week, so i get i tiny taste of the real taste. The tiny buds got much more fat these last 2 weeks, and aroma is getting intenser but not stinky. Little video of my 2 friends playing in the warm greenhouse. Both 9 years old and inseparable. Thats it for this week boys and girls, Thanks for reading and passing by and 💚💚💚👏👏👏👍👍👍 for Marshydro leds. Quality/price top! Grow safe buds and feel free to check out my other ladies doing fine thanks! 🌈viparspectra🌈 🎟️Organic_LarF♡viparspectra 🎟️ for your discount!!!! https://www.viparspectra.com/?aff=nbemz68cxril&utm_source=affiliate 🌈Join us now🌈 🙏🌿🌿🌿🙏 Special thanks to 🏅🌿greenbuzzliquids🌿🏅 Use organic_larF for 15% discount 👏👏👏Weedseedsexpress!!!! 👏👏👏 LarfxWSE for discount at weedseedsexpress!!! 15% off!!! 👽👽👽Zamnesia!!! 👽👽👽 Add OrganicLarF as a code when buying your own MarsHydro LED light and get a nice reduction!!!👽🚀🛸

Beginning to get into her stride, and rather larger than the 20:1 CBD auto plant growing alongside her.

week intel: we are going through slowly stresses : just a little E.C stress around 1.4 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 700 ppm - 1.4 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster around 327 ppm - 0.64 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 255 ppm - 0.5 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : know your plant tolerance limit of E.C stress once you saw the very very little yellowing on tips of leaves , that's the sign to don't go further , never reach that limit if you want a high quality buds, in my case tolerance is 1.4 and i'll reach to that level only once a week to cause precision stress , love your plants and have a happy growing!

Plants reacted well to last weeks LST! A little more bending and a small defoliation this week. I have just turnt lights to 12/12 wish me luck!!

Welcome lovely Friends, in this grow cycle we will try an awesome strain under an awesome light, I'm talking about Girl Scout Coockies and the 💡💡TS 600 by MarsHydro.💡💡 TS600 is an awesome lap for all growers, from the beginner to the expert because it has a balanced light spectrum (good for veg and flowering) and a low wattage. It is cheap to buy and to use, your bill will never be too high!! This lamp is also really efficient and it never get hot, a perfect replace and upgrade if you have an HPS!! (P.S.: They also have awesome stickers, you must stick them in your grow box for perfect results🤪🤪🤪) week #5 this week go to 22/11 to 28/11. The plant is growing so well! The light of MarsHydro is awesome, plant is growing fast and healty. Stems of the plant are strong and it is difficult to bend them! The light is never too hot and it create a perfect enviroament in the box. We are still doing LST and this baby are developing a lot of buds! WE'RE READY TO FLIGHT 🚀🚀🚀🚀🚀🚀🚀 day to day fert schedule: 📅 22/11 📅 23/11 📅 24/11 📅 25/11 📅 26/11 📅 27/11 📅 28/11 💡💡Here some details of this lovely light: Reduced Energy Usage LED Grow Light: Consuming 100w as well as installed with 225 pcs chips, TS600 is able to replace a 150w HPS light while saving 30% electric power. High Efficiency LED Grow Light: With overall light output PPF 190umol/S and good PPE 2.0 umol/j, it's 50% more photon effective so can promise a 30% more return comparing to the old HPS/MH lights. Patent Reflective Hood Design: The reflector on TSW2000 has actually been patented, which can effectively gather the light dispersed in all directions to improve its light intensity and aid plants acquire more light absorption. Full Spectrum Plant-Preferred Spectra: By the special combination of ranges that emits most light in the 400-700nm waveband, extremely conducive to plant photosynthesis. Appropriate IR(730-740nm) is additionally included in the range to help form larger buds. Trustworthy Qualifications And Warranty: CE, ETL, RoHS, UKCA security certifications approved, 50,000 hours long lifespan, 5-year service warranty, and local after-sales solution facilities. I WANT TO TELL THAT MARSHYDRO SERVICE IS INCREDIBLY AWESOME, I ALLWAYS RECEIVED FAST AND PRECISE ANSWERS! EXCELLENT LAMP, PERFECT CUSTOMER SERVICES AND FAST DELIVERY. THANK YOU GUYS, THANK YOU DEAR ELEEN! 💸💸💸💸💸BUY MARSHYDRO TS600: https://www.mars-hydro.com/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light 💸💸💸💸💸 OTHER AWESOME STUFF: https://www.mars-hydro.com 🍫🍫🍫ZAMNESIA SEEDS - GIRL SCOUT COOKIES AUTOMATIC: FAST AND FURIOUSLY TASTY🍫🍫🍫 TASTE OF A CLASSIC The enduring appeal of Girl Scout Cookies largely comes down to it embodying many crucial aspects of good cannabis. It owes its origins to the competitive Californian cultivation scene. Many classics have emerged from West Coast growers, but "Cookies" strains have spread particularly far and wide. Not least of all because they breed well with other strains. This has led to the creation of many Cookies hybrids looking to boost the already sensational characteristics of the original. Enter Girl Scout Cookies Automatic by Zamnesia Seeds. This strain harnesses the trademark high and flavour of GSC, and packs it into a compact autoflower. The uplifting effect of this strain makes for a high that is long-lasting and very satisfying. This is in part due to a THC content of around 17%. Although not as potent as some photoperiod GSC cultivars, this strain still makes waves throughout the entire body. These effects are made all the more sumptuous by the delectable flavours present. Distinctive dessert notes of chocolate, cinnamon, and mint make Girl Scout Cookies Automatic an ideal after-meal accompaniment. GROWING GIRL SCOUT COOKIES AUTOMATIC BY ZAMNESIA SEEDS While Girl Scout Cookies is undoubtedly a popular strain to cultivate, it isn't always the quickest to reach harvest. That's why Zamnesia decided to offer a robust autoflowering strain that encapsulates the hardy GSC genetics in small and compact plants. The resulting buds will be tight and resinous with thick orange hairs. The plant will finish its grow cycle after only 8–10 weeks post-germination. This strain is adaptable to most growing environments, reaching heights of 50–120cm indoors, and up to 150cm outdoors. While indoor plants are capable of producing 350–425g/m², outdoor plants can yield between 140–175g/plant. Not bad for such compact specimens! GIRL SCOUT COOKIES AUTOMATIC (ZAMNESIA SEEDS) FEMINIZED DATA SHEET Brand Zamnesia Seeds Genetics Auto Indica Parents Girl Scout Cookies x Ruderalis Flowering Time 9-10 weeks THC 17% CBD 0-1% Yield (Indoor) 400-450 gr/m² Yield (Outdoor) 150-200 gr/plant Height (Indoor) 120cm Height (Outdoor) 150cm Available as Feminized seeds Flowering Type Autoflowering Sex Feminized 💸💸💸💸💸 BUY GIRL SCOUT COOKIES AUTO BY ZAMNESIA: https://www.zamnesia.com/5408-zamnesia-seeds-girl-scout-cookies-Auto-feminized.html 💸💸💸💸💸 🔧💡OUR SET UP💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: NO, only the 3mm board but it never be too hot Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM PASSIVE HEAT SINK Noise: 0dB ✔️ MARSHYDRO PRODUCTS 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA -FANS: A)OSCILLATING FAN D.15cm 2 speeds 20w B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet) C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability. Power Consumption: 35 Watts Operating noise: approx. 39 db Diameter: 20 cm 💊💉💊FERTILIZERS: We allways use BioBizz All Mix, it is perfect also for the first weeks. TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support of our dream. ❤️ 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Update week 4 Bloom

Half way through week 5 and the buds are starting to fatten up, i’m a m so pleased with the length and symmetry of the colas on my plants! feeding nutes every other feeding, don’t want to lock it out on the home stretch!

Very happy to be growing this one. It’s one of the newer strains from Buddha Seeds.