The Grow Awards 2026 🏆
Likes
Comments
Share
1/25/2024 Vegetation Week 3 Day 1- took 2 Tops today and cleaned up a few lower leaves that were hanging down. The FiM seems to have worked well and looks like I have three branches coming in where it was FiMed. 1/26/2024 Vegetation Week 3 Day 2- took 2 Tops from the sides and took a little of the foliage that was touching the lid. She seems to be doing very well.. Water change day tomorrow.. YAY!! will get a good picture of the roots and see how she is doing. 1/27/2024 Vegetation Week 3 Day 3- Water Change Day! I noticed a slight red coming in on the STEMS which I added a pinch of EPSOM salt to help correct. I added 36 Gallons of Water I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 4.2Mil/Gal= 187Mil FloraGro= 3.8Mil/Gal= 137Mil FLoraBloom= 3.0Mil/Gal= 108Mil ORCA = .5Mil/Gal= 18Mil EPSOM- 1 big pinch 1/28/2024 Vegetation Week 3 Day 4- I cleaned her up just a little bit on stuff hanging down. I also made sure the PH is balanced so she could soak up the New Nutes. 1/29/2024 Vegetation Week 3 Day 5- I Got sick, Possibly food poisoned.. Luckily for me the system was able to do what it do and hold it down until I was feeling better. 1/30/2024 Vegetation Week 3 Day 6- I was still to sick to go to my grow room... Possibly food poisoned.. Luckily for me the system was able to do what it do and hold it down until I was feeling better. 1/31/2024 Vegetation Week 3 Day 7- First day back.. Her PH was down to 5.72 so I raised the PH back up closer to 6.0, I took a few pictures and got her height.. Feeling better through prayer so was able to get some pics today.
Likes
3
Share
@lalee
Follow
amnesia autoflower is the best strain. I and my friends love this strain. amnesia plant was very strong and beautiful and got much THC and have less smell. I think amnesia is best for indoors and I love amnesia
Likes
88
Share
@Roberts
Follow
Gorilla Jealousy F1 is doing good. I did a solution change on her 2 days ago. She is in her own space to flower now. I cleaned out some of the lower portion of the plant. I will do more as she stretches. I will likely have to do some hst on her. I feel she will try to get too close to the light.tge pest are gone. New growth is praying. She is looking great. Thank you Spider Farmer, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
37
Share
5/5/2024 Pistils pistils pistils 5/8 these plants are fucking exploding! Super exciting to see them like this. Pistils everywhere and they’re just STACKING! don’t even see budlets yet, just pistils. The structure of these plants is beautiful. They handle training fairly well. I topped one and super cropped it and did a bit of lst. I was feeling impatient so I decided to see what happened if I pushed the one a little harder and left the other to grow naturally.
Likes
14
Share
Hey guys :-) This week the lady was watered 3 times with 1 l each time. ( Nutrients see table above ) It is developing well and will soon be in bloom 😃. Apart from that, everything was cleaned in a controlled manner and osmosis water was treated. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Processing
Likes
7
Share
@Squidwich
Follow
Week 2 - Nutrient regimen: 0.5 ml Armor Si + 1.5 ml CalMag + 6 ml FloraMicro + 9 ml FloraBloom + 2.5 ml RapidStart + 1 ml Floralicious Plus. Used at 2/3 strength diluted with decholorinated water and ph'd to 5.8. 9/14/2019 (V10) - Neem oil extract treatment seemed to have worked! Runoff from nutrient feeding presented no more bugs, but will probably give an additional neem dose prior to 1 gallon transplant. Growth appears stagnant possibly stemming from previous larvae contamination, but root growth is evident in above picture and stems no longer need support. 9/18/2019 (V14) - Seems to be growing at glacial pace. Leaves getting broader, but no third node visible yet, and no apparent vertical growth. Humidity in upper 40's and temperature at 74F. Tiny runoff in red cup seemed to spur the root growth out bottom of transparent cup.
Likes
3
Share
Likes
58
Share
Video quality is so so for closeups with GoPro. Both phenos are super fire 2 more watering and will be flushing for about two weeks should take me near harvest at week 9-10. Mars Hydro FC4800 dimmed at 300w, will help lower temps and bring out those colours.
Likes
73
Share
@Peggers
Follow
No issues all week steady away I might have underwatered slightly this week partly because it's been so hot! Only noticed when I hand my hands in the media for a check. Had a nice rinse with some bioenhancer. Measured the plant at its highest point 30cm but its measuring at 60cm wide and its now just a waiting game till we achieve a little height. Still not defoliated anything at all yet but looking at it if I'm to keep an even ish canopy I might want to look at it. Tho it grows very strangely. It's like it will grow a little bit here and then the next day a little bit there so it's forever looking abit lobsided middle is due for its turn tomorrow tho. I've tried to control it by spinning the plant thinking it might be down to the air circulation but it appears it's not that.
Likes
105
Share
@Natrona
Follow
Frostbanger Plants 1-6 Week 8 May 18– 24 FLOWER 4 Nutrients : GH Micro 25 ml GH Gro 10 ml GH Bloom 30ml CalMag 30 ml Recharge 10ml Green sensation 16.5ml Power buds 7.5 ml 5/17 PH 6.3, PPM 1130, temp 71 1ltr each 5/18 PH 6.67, PPM 935, temp 68.5 1 ltr each 5/20 PH 6.67, PPM 1330, temp 68.5 2 ltr each 5/21 PH 6.66, PPM 984, temp 69 1 ltr each videos & pics 5/17 Defoliation of yellowing leaves, feed, pics As I mentioned last week, I must monitor and control the tent environment manually. For the past month, the humidifier has been an issue putting out way too much humidity; often leaving water in the bottom of the tent. In addition, the temperatures are also out of control. I added an AC last week to keep the temperature below 80. I finally determined the exhaust vent is also broken and has been for some time. AC Infinity does not extend the warranty to the replacement parts. I guess that makes sense since they would be in a state of perpetual free replacements. I bought a new one from Amazon that came with a new controller which is different from the controller 69 currently using. I decided that while it is very inconvenient and inefficient to monitor the tent through the day, I would rather finish this Frostbanger run without introducing a new unknown variable. I will continue using 3 circulating fans, the 4” exhaust vent from my 3x3. I have the AC pushing air in and the exhaust pulling air out. This creates a neutral pressure tent environment-neither positive nor negative. It looks like growth has stopped and plant height has been reached. Now is the time for buds to fatten and frost up. All 6 of them are short remaining less than 3 ft. They range from 15 to 31 inches. #4, 5 &6 are showing some fade, particularly #4. Upon opening the tent, a melon smell comes off the buds if I get close, and more stickiness was observed during the process of defoliation. They are living up to the new strain’s name. #5 is the frostiest followed by #2. Wow week 3 of flower and that much frost already. Before FastBuds announced the strain name and characteristics, I was disappointed that FBA2502 could be an indica sleepy strain but the universe provides what you need at the time. The new strain profile indicates a whopping 29%THC with mainly sativa uplifting, euphoric, social effects with sweet fruity flavors which I love and enjoy. In addition, I recently bought a dap press and this strain is frosty and resinous. She will be great to press for live rosin. FBA2502 is FROSTBANGER. Meet Frostbanger Auto, an autoflowering and Indica-leaning hybrid packing a staggeringly high THC content averaging 29%, making this one of the most potent strains on the market. It was created by Fast Buds through crossbreeding Gorilla Glue and Chemdawg, two equally iconic strains. Growers must know that these difficult-to-grow plants will pose specific challenges in terms of environmental control and nutrition, making them best suited for cultivators with some experience under their belt. The flowering cycle is short, averaging only 50 days, and yields are usually around 300g/m². The Frostbanger Auto flavor and aroma are both mouthwatering with a delightful combination of sweet, fruity, and flowery notes. The high is mainly Sativa-driven with uplifting and happiness-inducing effects that lead to euphoria and a general sense of well-being. You might feel sociable and talkative, but too spacey to say something. Following this surge of energy comes a deepening sense of relaxation, leaving you sedated and completely at ease with the world. Due to its potency and these long-lasting effects, medical patients hail Frostbanger Auto for treating chronic pain, stress, and even depression. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫
Likes
14
Share
10/21- Flower has begun!! I've been gradually removing growth from under the canopy that I dont anticipate will become sizeable buds. Now we wait for the stretch. Took a few clones to try my hand at that. Air is drying out big time lately. I'm probably going to have to give in and buy a humidifier because it's going to be essential to keep my buds from drying out too fast and keeping these plants in healthy rh range. Despite humidity swings, plants seem to be doing well across the board so I already have a leg up on my last grow. I sprayed for bugs as a precaution. Neem and peppermint Castille soap diluted in water was the choice. Left a residue on my plants though so live been keeping my light between 30-40% and gradually turning up the intensity each day until I reach where I was(70) I dont want to burn my leaves because I have treating for bugs before. I will add pictures this weekend. This is posted on Day one so there's really not too much change to show in the plants. Really excited to see how they develop over the next 2 weeks. 10/24 Added pics of two plants. I accidently deleted my shoot of GZ 2 and I don't feel like taking them out of the tent again because it's a bit of a pain with the net. It's much taller than it's sister and maybe the healthier plant at this point. Moby dick is a bush, very healthy even still. No real signs of flower yet. They do seem to be stretching a bit but when you look everyday it's hard to tell. I'm hoping to have a really nice canopy in a week.
Likes
34
Share
***** Week 11 growth - February 20 to 26, 2021 - Week 3 Flower ***** These girls sure catch my eye every time I open the tent! MM1 has some awesome hybrid vigour and is looking F’n awesome 👏 👏 Stacking up beautifully and based on the diameter of their tops there is some swelling to come. Getting the underside cleaned with a good leaf strip has really changed her look and lower sites are getting of lots light now👊 I could have gone harder but that was good for me.....I will deal with some of the lower shit that may remain. Light is at 20” and pulling 480 watts at the end of the week. Stated off with 400 watts at the start of the week but keep pushing it up this week. I don’t want to break 1,000 to 1,100 PAR by very much as I am not supplementing with true CO2. I have an Exhale bag to raise it a couple hundred ppm. Feel the need to keep the intensity high for penetration lower in the canopy. Will lower the amount of time in daylight if stress gets too high. Push to 11/13???? Nutrients are following IPP HOG 3 Part pretty closely. Just playing with macro nutrient ratios but otherwise supplements are at full week dosages following week 3. Have been seeing great resin production last runs so staying with Rezin as part of their feed schedule in flower. Terpinator......I think I see a lot of sulfer benefit here so it stays in the grows as well. Recharge seems to be working out well but we did the change mid grow from Microbial Mass. Since in coco have to feed the microbes so they reproduce and really dig Nature’s Candy with Remos additives in there👍 To help keep the root zone clean we add Enzymes😃 I have been debating a lot lately about the addition of CalMag to these nutrient lines and it’s necessity but since in coco I keep adding some......noticed a couple of spots on MM2 so have added it back in a bit more this week. Little more detail....... Feb 20/21 - Day 15 - Full feed today.....it’s been five days. - tap water with Silica @ 1.5ml, IPP line at full strength. - 1400ppm and 6.1pH - 4L for MM1 and 3L for MM2. Feb 21/21 - Day16 - Dry out day Feb 22/21 - Day 17 - watering with supplements and light feed today. We are in mid flower now.....need to keep the macro nutrients up. - Epsom salts @ 1 Tbsp in 20L. Purple on stems is getting prominent......could be cold temps but also giving magnesium. - Terpinator @ 3ml, Rezin @ 1.5ml, Nature’s Candy @ 1ml, grow @ 1ml, micro @ 2ml, bloom @ 2.5ml, Recharge @ 1 Tbsp in 20L. - 1400ppm and 6.0pH. - MM1 - 5L and MM2 - 4L. Feb 23/21 - Day 18 - keeping up the silica this watering - silica @ 1ml, CalMag @ 1ml, Ultimate B+ @ 1ml - 600ppm and 6.0pH - 3L for each girl. Little to no runoff this watering. Feb 24/21 - Day 19 - full feed again today.....girls are big and growing hard......keep it going💪 - IPP line as listed for full line. - Terpinator @ 3ml, Rezin @ 1.5ml - 1425ppm and 6.0pH - they are taking the high ppm feeding well. Feb 25/21 - Day 20 - Had some feed water left from yesterday. Added plain tap water to get 20L. - 810ppm and 6.1pH - 2L for each girl......don’t want to over saturate the medium. Feb 26/21 - Day 21 - Nothing today. - Will feed early tomorrow as it’s Saturday. - Let the root zone get some oxygen is my thought and water to nice runoff first thing in morning. Week three behind us looking forward to week 4. Expect to see more swelling and hopefully little stretch🤞 Frost levels are coming on strong and they have great signs for things to come💪😎 Pheno 1 is Turing out to be fire.....hope the terps to come are going to be as impressive. Thinking that these girls are going to primarily be turned into concentrates......or take a good size sample and see how she squishes👍 Glad we rolled the dice on this strain ETS.....now for patience😉
Likes
6
Share
Enfim floração, chegaram bem e saudáveis agora e manter os cuidados aumentar a alimentação e torcer para nao esquentar muito nas próximas semanas .
Likes
3
Share
8. Woche Man könnte echt meinen, sie kriegt nicht genug zu Snacken aber ich bin schon dabei alle 4 Tage was zu geben... Die Pflanze ist der reinste Nutrients Vampir 🤔
Likes
6
Share
@LX1977
Follow
J-29 arrosages eau (pH 6.6) J-31 arrosages avec engrais (pH 6.6) J-33 arrosages eau + diamond sugar (pH 6.5) J-35 arrosages eau + nématodes bénéfiques (2eme phase du traitement contre les larves de mouches de terreau)
Likes
116
Share
💩Holy Crap We Are Back💩 Well i had so much fun the last round , that we are going at it again 😁 OUTDOOR GROW👈 So super happy to be trying this one out , can't wait😝 .....The hope here is to do better then last summers outdoor grow ..👍 We are just a week in and she's doing great , she's growing well and I'm just waiting for mother nature to do her thing and out she goes 👌 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
30
Share
@Momentum
Follow
Voll im Stretch. Ansonsten geht es ihnen gut, die Blüten sind deutlich zu sehen und sie haben ein sattes Grün. Die Co2 Bottle, die ich besorgt habe, kommt nicht zum Einsatz. Ich habe einen viel einfacheren Weg gefunden. Einfach bei geschossenem Fenster atmen 😄 Im Home Office komme ich bis 10Uhr auf meine 1500ppm und halte sie den ganzen Tag. Der Sensor war auf jeden Fall kein Fehlkauf.
Likes
1
Share
El registro corresponden a los dias 28, 30 de abril y 2,3,4 de mayo Despues de realizar corte apical y algo de lst junto defoliación leve. Hasta ahora las plantas van muy bien, creciendo muy bonitas y con fuerza. Tratando de llevar todo de la mejor manera ya pude ajustar algo el set donde tengo mis planta y cada vez más contento con estos resultados! Ya hoy la white widow ibl cumple 30 dias desde germinada y la zinfandel 23.
Likes
38
Share
@GMSgrows
Follow
The AK2.0 is one amazing strain. Long fat colas and beautifully structured plants. Like I said earlier. They should be named Bazooka 2.0's. Thanks for the looks and likes my brownies. 🙏