Hey now, I hope everyone is having a great week and staying safe. It was a nice week for the Glueberry OG as she grew to her 7th node on day 26 and I just popped off number 7 gently so she will end up with 10 main chutes from 5 nodes as i also removed the bottom node which typically is larfy popcorn buds. If she had not reached node number 7 by day 28ish I would have just topped her above the 5th node as I have had great yields that way as well. Dutch Passion says she takes 11-12 weeks but autos usually start preflowering/flowering between days 28-35 depending on strain so I try to complete all toppings by day 28 or so with autos because if you top them after they start to flower they will suffer. I have topped above the 3rd (for mainlines and mainifolds) as well as the 4th, 5th, and 6th with great results from each. As a general rule, the longer the autoflower is expected to take, the higher up I top her as she will have more time for more colas to develop. Some people think that topping stunts an autoflower, however as long as you allow her to grow a nice ball of roots and she is healthy, it only stunts mine for about 30-45 seconds. Glueberry OG Auto is absolutely loving this Medic Grow light so far, and I am super impressed with how tight she is keeping the nodes. I am running on 60% power in the V1 or vegetative blue stage. I will start working the UV/IR Spectrum into the mix as soon as my 2 seedlings go into coco coir and can handle some more light. The Glueberry OG Auto is currently 6 inches tall and was topped above her 6th node, and since the first node doesn't start until 2.5 inches from the coco, that is a tight group! I will start LST tomorrow on the two top mains, as it has only been 48 hours since topping and they are growing fast. I see alot of growers tie down their entire plant to the ground for LST and that is ok but not beneficial imo. My goal is to keep her nodes tight, and then just LST the mains from the uppermost nodes, as to allow the lower nodes to catch up., while I typically clip the bottom most node as she typically only produces larfy popcorn buds. These are certainly usable for bubble hash/edibles/cannasugar etc. but they do drain some energy from your top shelf colas. The goal of LST should be an even canopy as to minimize apical dominance. This will allow the plant to better utilize the existing light and limit wasted light that converts to heat. Tying a plant down restricts the airflow from the plant and impedes the growth of the lower mains. LST does not require pinning a plant down to the ground with staples, and although a cannabis plant will bounce back from this, it certainly will not reach its full potential. As far as nutrients go, I feed veg nutrients until my auto is almost done stretching then I transition to full flower nutes over about a 6 day period. The only exception is if my plant is growing out of control and I am unable to slow it down through topping, LST, super-cropping, etc. At this point I would make the switch to flower nutes slightly sooner. So she will be feeding on silica, cal mag, and veg nutes for at least a few more weeks here and just some LST. Thanks everyone for stopping by and checking out my little grow, I hope everyone stays well, be safe and Blaze On! 💪💪💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Gorilla Cookies has been doing good up till today. Has a little ph climbing issue. So I increased nutrition some to help keep ph in check. She should be ready to go now. Everything is going well with the G3000 light. Thank you Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)

Goin beautifully. Feel like it’s coming very easily now.

Hi there! Thanks for checking up on my Glueberry auto from Expert Seeds. She has popped through the surface over night. Hope you found the video entertaining and somewhat educational! Happy growing everyone! ✌️😎💨

I switched my nutrients to Nectar For the Gods because I didn't have the funds in the beginning to do so. I got their spartan regiment with the extras. Photo-plus and SLF-100 which I use separately and not during feeding. Im watering everyday and feeding every other day. Water days I use SLF-100 and the next water day I use tea with Photo plus. my tea I use bloom by cultured biologics organic easy bloom and compost worm castings from my personal vermicomposting bed. alternating water days with the slf and photo plus was a massive growth in buds. They dense' nd up and just started putting on trichomes. brilliant brand- Nectar! OCGFAM for life now. Feeding is a pain but damn its worth it. Pricy but worth the investment!

Sorry For The Delay but I was kinda busy ......Anywho on 3/19 I Changed The light Schedule form 18/6 to 12/12 To Begin My Pre-Flower Stage I Also Bent The Last Few Uneven Tops To Have A Table Top like Canopy (LST) Also Cut Off all Little Branches (Lollipopping) To Prevent Getting Any Little Pop Corn NUGs. Then ON 3/20 I Increased My Light Intensity From 25% to 50% And began giving These Girls There Flower Nutrients Listed Above . AN Updated Video Of the Week POSTED ABOVE Video Taken About 3 Days After Making These Changes And yes The are All Showing to Be Females

5 jours de canicule et 2 jours de tempête

"Mens Dei" What can be made to expand, airy and loose, can also be made to contract, dense and tight. Trichomes do not discriminate, although we like to think of trichomes' primary purpose as being to get us high; they are there to provide photoprotection (sunscreen). Trichomes apply themselves based on area dimensions; the more area = the more trichomes in order to protect. Different from density: Trichomes, the resinous glands on plants, are often produced in response to stress, including high light intensity. This increased production can lead to denser trichome coverage on the plant, stress, stress, stress, stress is the signal. There is a certain beauty in watching the large water-filled buds once swollen to the brim slowly shrink during drying, as the surface areas contract, the trichomes just cluster up to form denser and denser coatings, already dense from high light intensities, UVB exposure, and IPS, and every other stressor I could tweak. Trichomes, the resinous glands on cannabis plants, are often produced in response to various forms of stress. These stresses can be environmental, like excess light(HIL) or UV-B radiation, temperature fluctuations, or drought, or mechanical, such as wind, pruning, or even the weight of the plant's own buds. The plant reacts to these stressors by increasing trichome production as a defensive mechanism to protect itself and its valuable compounds like THC and CBD. In essence, cannabis plants perceive stress as a threat and respond by producing more trichomes as a way to protect themselves and their valuable compounds. Several studies have shown this. Not so much a "master" grower as a master of stress. Psssst. Trichomes fill with "antioxidants," including THC. Ant"ox"idants, The production of antioxidants in plants is intricately linked to their oxidative apparatus. The plant has limited oxidative capacity/apparatus. During daytime photosynthesis, a large percentage of that oxidative capacity is tied up in protecting the plant. During the night, plants alter their metabolic pathways. This leads to a far more focused production of specific antioxidants, like THC. Plants also produce antioxidants during the day to scavenge ROS made from photosynthesis. The differential ROS production by blue and IR light can have significant biological consequences. For example, high levels of ROS induced by blue light can lead to cell damage and death, while lower levels of ROS produced by IR light may be involved in beneficial cellular signaling pathways. Long nights under the IR (very low ROS), the boost in cellular respiration, and the boost in energy production. In a perfect world, I'd give the plant a shock treatment of 60DLI in 4 hours and give her the other 20 hours to perform cellular respiration under IR. The stress of those 4 hours would be rigorous and full of stress abound, 1800-2000ppm CO2 is easy for a couple of hours during daylight, it's maintaining it that's hard, but 4 hours is very doable with nothing but a little extra "carbon sugar" in your medium every other night during the first 4 weeks of flower. In my opinion, you only need to jack CO2 for those first 4 weeks of flower to see maximal output, after that it's all about trichome preservation, everything else comes second. Without the temps to assist with metabolism, CO2 is reduced to normal levels along with temps 4-5th week of flower. Buds are primarily composed of water. Developing flower buds, like other plant tissues, require a significant amount of water for growth and turgor pressure, which helps maintain their structure and firmness. Turgor pressure in plant cells is primarily generated by osmosis, but transpiration plays a crucial role in maintaining it. The optimal internal leaf surface temperature for photosynthesis at 1800-2000ppm CO2 is likely in the upper range of 97°F, meaning ambient would need to sit at 102°F-ish or thereabout for full metabolic utilization. That's putting your transpirational pulling force x5 x6 maybe x7 of what it would be if she were cruising at 68F. "My buds won't fatten, what can I do!!" Crank it. If your purpose was to blow up a balloon as fast as you can, as much as you can, would you use 2x force or x5 Force to do so? Bad analogy, but you get the idea. Kiss. Optimize photosynthesis & VPD by day, cellular respiration by night. TECHNICALLY: "While transpiration and cellular respiration are both ongoing plant processes, they are not neatly separated into day and night. Both processes occur both day and night, though at different rates and with different emphasis. Transpiration, the release of water vapor from plant surfaces, is primarily driven by sunlight and photosynthesis during the day, but it also continues at a lower rate at night. Cellular respiration, which provides energy for the plant, occurs continuously, both day and night. " A leaf can perform cellular respiration and photosynthesis simultaneously. During daylight hours, plant cells utilize both processes: photosynthesis to produce glucose and oxygen, and cellular respiration to break down glucose and release energy for the cell's needs. The products of photosynthesis (glucose and oxygen) are used as reactants in cellular respiration, while the products of cellular respiration (carbon dioxide and water) can be used in photosynthesis. The limiting factor is the oxidative capacity; the less a leaf is utilizing photosynthesis, the less oxidative capacity it uses, and the more it can perform cellular respiration. Even if a leaf is not in an optimal photosynthetic position, it can still utilize respiration to its full capacity during daylight hours. Kinda too much info to explain when some asks if they should defoliate or not, yeah add calmag or some shit. BUT Only 10% ATP can be processed through photosynthesis and carbon capture. 90% of ATP is processed when the plant's oxidative capacity becomes available (NIGHTTIME). Cellular respiration relies on the process of oxidation to generate energy. Specifically, the final stage of cellular respiration, called oxidative phosphorylation, utilizes oxygen as the final electron acceptor to produce a substantial amount of ATP, the cell's primary energy currency. Factors such as oxygen concentration, glucose availability and temperature will all impact the amount of aerobic respiration an organism will perform. See you next grow, *twiddles thumbs*

Hey Guys, so we got through Week 1 ! Everything looks good for me... Forgot to take more pics of the baby this week, will make up for it on Week 2. i feed the baby foliar spray and normal feed with the light soluction about 500ml every 2 days or so. EC 0.8 | PH 5.8 HPS Light at 60% I think i got it right, let me know if you guys see anything wrong.

another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!

I’ve kept almost all the fertilizer, light, and environmental parameters the same. I did a good defoliation to improve airflow, since I was having a bit of trouble lowering the humidity. This also helps the light penetrate better through the buds, allowing them to develop more fully.

Same nutes . Colors, trichs and smell starting to shine. Cold temps at night . About 65F-70F

Bud development going strong this week, seeing lots of sugar leaves and new bud sites forming each day. Hoping to see the buds stack a little more soon. All seven plants are in flower now, this purple trainwreck plant being the furthest along. She should have another 4-6 weeks left before her chop.

Le piante più grandi sono nella 3 settimana,le più piccole alla 1 e alla 2. Le più grandi hanno fatto il sesso ma ancora non fioriscono,fra poco somministreremo auxine naturali per dargli un pò di fgas

.💪🌱🌲☀️👌Truffle gas #1 × (Animal Cookies x Do Si Dos ) Hi everyone 👋 for the smell 👃 this one verry gas, diesel And earthy And slightly minty Useful links👇👇👇 https://artgenetix.world/ https://marshydro.eu/products/mars-hydro-ts-1000-150w-led-grow-lights/?lang=fr https://shop.greenhousefeeding.com/4-bio-nutrients https://www.royalqueenseeds.fr/47-growing https://biotabs.nl/fr/produit/bio-pk-5-8/

Pour le jasmin et le soulubol c'est 1 gouttes jasmin 2 gouttes solubol dans 5 litres d'eau ça aide pour la production de résine .

Edit

Last Week of her life, now shes getting in the darkroom for 2-3 days. I flushed her the 3 days with water, and didnt give her any water for 2 days after flushing. I had to cut the Main-Bud due to mold :( Total flower time ~12-13 Weeks. Total Life Time: Since April 24th 2024. After the darkroom shes is going to be hung for 1 or 1/2 weeks depends. Get ready for the harvest, I've already had to taste it and I have to say it tastes like gelato and smells like gelato. But more on that soon.

A pleasure to grow and a pleasure to smoke thanks humboldt