Likes
Comments
Share
UPDATE DAY 79, LAST DAY OF ETHOS Pineapple Runtz Autoflower 🍍 Fed 1/2 tsp of Winter Frost The smell hasn't been too overwhelming, which I'm hoping translates to terpene preservation, or I'm nose blind. Fatty nuggs, resin stacked , big trichomes. Nice yellow fade 💛 The seed pack called for 70-80 days, I anticipated these taking every bit of that. Which they are! Super excited for these resin Pineapple bud.
Likes
38
Share
Day 106 12/25/2021 being of a new week and this will be more than likely the last week this lady gets any nutrients thinking Wednesday. After that will start flush with collected rain water. After checking trichomes they were about 85% cloudy about 10% clear and 5% amber which is right where she should be since the end is coming fast. Day 110 12/29/2021- Started flush today and will continue to just feed rain water until next Wednesday. Will cut her down next Friday 01/07/2022.
Processing
Likes
1
Share
@Ferenc
Follow
Day 29: LST is done. 600W LED, 20 hours on 4 hours off the same with ventilation. Insetvrhe lamp approx 36 cm away. Water intake: 75 ml per plant plus triggering, humidity around 60 percent. Fertilization is on Monday, Wednesday, and Friday with BioBizz family, Tuesday, Thursday, Saturday bat guano and Epsom salt. Critical Orange Punch started flowering se grows very quick. Rest of them are OK as well they are on the way... Day 30: I did LST again. I didn't have enough elastic band yesterday so I bought today and bent them better. I also set the lamp closer approx 32 cm.Day 31: I did LST yesterday and bent them. They already "lifted up" their heads toward the lamp. As they grow I will keep bending the main stalk and the side ones. I will try to create a spiral form and spread the plants with time. Day 32: Almost all of them started flowering except Sour Stomper. Day 35: Auto Critical Orange is the monster here. She is the most developed and tallestbwoth approx 28cm. (Hard to.measure property because of LST). Pre flowers developing nicely along the plants. I changed the lamp as it needed to my other tent because my other lamp is shit. So I will swap them one week here other week there... End of the week the tallest is Critical Orange Punch with approx 28 cm and the shortest Sour Stomper with 14 cm.
Likes
3
Share
Successful topping performed on the two dominant Bruce Banner phenotypes. Third Bruce Banner successfully topped; older ones react very good to LST.
Likes
7
Share
@paetel
Follow
At the beginning of week 4 she started to show yellow leaf tips. My assumption was that it's caused by light stress. I then increased the lamp distance progressively to around 25 cm, PPFD 400. Since the overall growth was satisfying I am not that worried. Maybe someone can chime in with a better analysis. Different sources say, that this strain could stretch up to 3x. I think I will flip her very soon since my tent is rather small.
Likes
80
Share
@Roberts
Follow
So this was a clone I took from the mother plant that had a pigment mutation. I just found the evidence that the whole plant but one half a leaf is the mutation. I thought I was feeding her heavy. I'm she has just been eating great. Drinking her little potter bone dry in 24 hours. I am really curious to see how the bud looks when it gets totally done. Everything is going great. I just keep hst the branches to keep them out of the light. Thank you Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
14
Share
@BLAZED
Follow
Week 13 (10-10 to 16-10) 10-10 Temperature: 27.4 degrees (lights on) 20.4 degrees (lights off) Humidity: 82% (highest) 51% (lowest) Watering: 1250 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) The strength of the light is set to 90%, distance is at 29.5 cm / 37 cm. LUX: 22.300 / 27.300 11-10 Temperature: 26.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 74% (highest) 52% (lowest) Watering: 700 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 12-10 Temperature: 26.8 degrees (lights on) 19.9 degrees (lights off) Humidity: 76% (highest) 60% (lowest) Watering: 400 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 13-10 Temperature: 26.8 degrees (lights on) 20.9 degrees (lights off) Humidity: 85% (highest) 60% (lowest) Watering: 1000 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+) 14-10 Temperature: 24.9 degrees (lights on) 19.5 degrees (lights off) Humidity: 74% (highest) 49% (lowest) Watering: None. 15-10 Temperature: 23.8 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 49% (lowest) Watering: 1200 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+) 16-10 Temperature: 23.5 degrees (lights on) 19.4 degrees (lights off) Humidity: 54% (highest) 50% (lowest) Watering: 1000 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+)
Likes
3
Share
Día 02. Tuve que empezar la floración. Las raices estaban empezando a salir por el caño de descarga. Además estoy notando que al quedar mucha agua atrapada entre las raíces, la toman más rápido y los 20 litros que puse no sé si van a alcanzar. Ya había tenido este problema hace bastante y me había olvidado. Pero igual no me preocupa tanto. Sé que puedo manejarlo tranquilo. Así que al final, la semana anterior fueron sólo 3 días. Ahora voy a ir planificando bien, dado que la diferencia de altura en una de las Polaris, me va a obligar a ir llevando un LST riguroso. También estoy empezando a pensar en formas para evitar las tapadas de raíces. Creo que algo se me va a ocurrir para implementar en algún momento. Voy a hacer un corte de hojas muy grande cuando haya terminado el estiramiento de pre flora. Porque quiero probar cuanto afecta a una rama el quitarle la hoja principal. Algunas he cortado y otras cuantas no. Apliqué Feeding Enhancer de Greenhouse, en forma foliar la noche que pasé a floración. Voy a hacer una nueva aplicación en una semana seguramente. Tuve que bajar la frecuencia de reigo de 30/30 a 15/45 por hora, porque creo que eso hizo que se hagan tan grandes rápido. Igual es un dato que voy a tomar en cuenta para el futuro. Día 04 Me preocupa la velocidad a la que se toman la solución nutritiva. Les puse 20 litros hace 4 días y quedan solamente 12 litros. A este ritmo voy a tener que empezar a poner mucho más de los esperado. Aunque igual, creo que cuando haga un trim fuerte de hojas, ahí van a empezar a regular más el consumo de agua. Además al haber crecido tanto las raíces, es mayor la cantidad de solución que queda estancada en las raíces y es consumida. Así que eso también será un tema a mejorar. Me gusta que las plantas estén así, pero siento que no las voy a poder controlar.
Processing
Likes
5
Share
Likes
3
Share
I lost the pics for the first weeks of veg unfortunately but the most important time the flower is all on film;)
Likes
4
Share
Week 5 veg - clones and Week 3 - Blueberry Cupcake (Humboldt Seed Co.) and French Macaron (TH Seeds) from seed. G-41, Frosty Gelato, and Frozay Gas topped with 2 clones each taken from cuttings to propagate placed in 2x2 clone/seedling tent with low LED lighting. Temps in low 80F w/60% ROH. Clone cuttings covered with sandwich bags used as humidity domes. After taking cuttings transferred G-41, Frosty Gelato, and Frozay Gas to 3x3x6 AC Infinity tent under Mars-Hydro FC-E3000 set at 50 percent power (PPFD range for veg). Black Cherry Gas clone, Blueberry Cupcake, and French Macaron from seed remain in 2x4x5 AC Infinity under Spider Farmer SF-2000 with dimmer set at 50 percent power (PPFD range for veg). Continued twice weekly IPM foliar treatment with Organishield as well as watering soil program (SP).
Likes
13
Share
I love this strain and cant wait to grow it again. It came out amazing with a very nice look and taste to it. It reminds me of this grapefruit strain i smoked way back, the taste is very unique that i have only found in a few strains in my 20 years of smoking. I'm very curious what this strain is!!!! I think its high in sativa genetics
Likes
490
Share
Day 44: everything is going fine and I give these 2 girls different nutes for now! I give the other one 2.6ml/l canna a/b and no boost accelerator. This is the light that I’m using for this grow! Mars hydro SP3000 High PPFD at 2.8 umol/j, average yield at 2.5g/w, increasing your yield 50% or more compared with old blurple and HPS lights, 300 watts output. Dimmer knob added, more convenient to adjust the brightness. Up to 30 lights can be daisy-chained and control together on just one light, or just have one lamp in 120x60 tent is perfect for light. https://www.instagram.com/marshydro_aliexpress2/
Likes
14
Share
Likes
5
Share
@greeneric
Follow
The Plants recovered from topping last week and are now more or less on one level. I increased the light strength every day. Now at 40%.
Likes
2
Share
Once again these girls don’t really need much just watering when dry but other than that we are on cruise mode. I have been checking trichomes for about a week now and man is she almost there I should be giving them lights out with in another week or two can’t wait