Leaves starting to turn purple , will start flushing in two days to take it to 60 days flowering .

Just the start of the week but they are growing well at this point I think. Did some defoliation on day 4 of the week looks like air and light will get through easier now. Last day of the what I'm calling 5th week. My LST training appears to be going well? I'm new to it but they seem to be relatively flat which is the goal

Day 63...buds fattening up nicely...currently experiencing worst pollution on the planet with AQI of 300+ for most of the week which i fear is affecting growth..,..the buds look a lot browner in the pics, than i reality.. due to the post-apocalyptical tinge to the sky as the sun sets, though the smog

It's week 10 of flowering, and Lemon Cherry Gelato is slowly starting to broaden out a bit. However, she'll still need some time—about 2-3 weeks, I estimate. From now on, she'll only be given tap water with a pH level of 6.5. The leaves are slowly turning purple. 🍋🍒🍦

Flowering day 7 since time change to 12/12 h. Hey guys :-) The flowering started last week because otherwise the space in the small tent would end up being too narrow :-) Cuttings were taken from each phenotype beforehand. To change the flower, I rinsed it very lightly with clean fruits. With the next watering she gets a mix of grow liquid and bloom liquid before she only gets bloom. The heating mat works perfectly in the small tent and the parameters are all in the optimal range 🙏🏻👍. Now we hope that everything stays that way and that the cold days will slowly pass :-) . Everything was cleaned and checked. have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Not doing too bad. Seems to have settled now and stopped stretching, Smells pretty peppery, like a tangy pepper haha Start her on PK warrior next week see how she does. She's got the sumo booost foliar as well as root feed this week. All healthy though she's loving the shogun stuff 👌🏻

I was on vacation for 1 week so i couldnt take any pictures… but shes going nicely into flowering stage now Light is running on 100%

This week went real great , one has been getting flushed and the rest we will start flush Tomorrow! These ladies are doin so amazing! Hope you all enjoy !! Stay tuned for next week! Cheers an happy holidays!

420Fastbuds StrawberryGorillaAuto Week 4 What up grow fam. Weekly update on these 3 wonderful ladies. This week I did introduce some nutes and the plants seem to respond amazing. Starting to see little pistols so guessing this will be the last week of veg before the transition into flower. All in all Happy Growing

Rega com Fertilizante. Terminando de regar com o ultimo litro feito. Mais ou menos 150 ml em cada planta. 1 ml do liquido por litro + 0,15 g por litro do sólido. Ajustado o PPFD para aproximadamente 500 em cada planta

Nine weeks! This week I wasn't able to take many photos because I had to travel and was away from home.

( IVE SWAPPED OUT RHIZ FOR REGENAROOT ) will flower when i have room :) Feed Started With Tap Water Left Overnight For Chlorine/Chlorides To Evaporate. Next Day. Starting EC of our water is 0.15. I added 1ML of Regenaroot Per Litre. Then Used Canna Terra Vega Until EC measured 0.7. I then used the mighty growth enhancer drop by drop until my EC measured 1.1 Finally i PH'd the mix to 6.2. Made sure the feed was of adequate temp and continued to feed.

WILL UPDATE WITH ALOT MORE DETAILS ASAP!!!!!

This was a good grow couple of ups and downs weather wise and the moment of devastation when seeing my fattest cola had been affected by bud rot this was a solid happy nug yesterday and today well thenpics tell a tale all other buds were fine and are drying as we speak ye win some ye lose some some are just fkin annoying

The overfeeding on the center plant becomes apparent, but it still takes me a while to realize it and I kept feeding it the tomato fertilizer.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Its been an awesome week! (despite some grow room power issues)... the SP-3000 makes for some of the easiest grows we've ever had. Our plants look super happy and they pray nonstop to Mars..This light has made our little 4x2 my favorite place to flower Check out some of our previous harvests under the SP-3000, we have stellar results using it.. Mars has completely changed how we view LED.. We've officially replaced all HID lighting for MarsHydro fixtures and our only real complaint is not doing this sooner 🤘😼 The Ghost Candy's flower stretch was pretty close to what we expected from them. They have a great, uniform color and bud sites are starting to form.. being soilless these girls are eating a little bit with almost every watering.. we have 2 distinct phenos, 3:4 have a more broad indica hybrid looking fans, where 1:4 appears sativa dom, we'll be sure to clone each..not too much else to report, good genetics and light make for easy weeks..thanks as always for dropping by and happy harvests everyone!!! 💡🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Last week I thought that the 50cm distance between the light and the top of the canopy was ok. But this week, I get some signs of light burns on every plants and I decided to put it back to 60cm. This distance seems to work best for this grow. I think the Cashew Kush shows some slight signs of nitrogen deficiency so I added a bit of BioGrow (1ml/l) and hope it will help. For more info about the "Soil people", see week 9. As part of the "Tent-X Ultimate Grow Challenge" contest, I received a free Tent-X controller, a MBS-TH Humidity/temperature/light sensor and a LMA-14 light control adapter. I requested them on sunday and get them on thursday so it was super fast, thank you @TrolMaster_Europe ! 👌 ------------------------------- Controller + MBS-TH review ------------------------------- The Tent-X controller combined with the MBS-TH sensor provides information about temperature and humidity. The light detector of this sensor is used to trigger the day/night mode of the Tent-X controller but doesn't measure light intensity (you need another sensor for that). I've tried to connect the controller to the phone app and it seemed to work. I will not use this function because it requires to connect the controller to the internet with an Ethernet cable and I don't have an Ethernet plug in my grow room. I set-up a rudimentary fixation system to hang the controller and the sensor since I'm not growing in a tent, but it works haha. Now, I can make my measurement in the center of the canopy instead of making them just above the ground. ---------------------------------------- LMA-14 light control adapter review ---------------------------------------- This adapter allows you to control your light via a RJ45 cable. I'm not using it because my light and my fan are synchronized and my fan cannot be controled by a RJ45 cable. I don't want to have a timer for the fan and a controller for the light. I just use the timer for both. However, Trolmaster sells some plug sockets that can be controled by RJ45 cable so you can control everything with your Tent-X controller.

Nice big fan leaves. I am continuing to open the two branches created after topping and defoliate to get more light onto the perpendicular branches. Just watering, mycorrhizae and microbes as I just transplanted. 12” diameter airpots.

this cycle will be godzilla glue#4 and sunset sherbet, both females. and although you see 2 sunset sherbets in the video, 1 of them was later transplanted for outdoor, which is in my other post. the GG4 was germinated 1 month AFTER the SS. i will be feeding with BluePlanet FarmersPride organic 3-part high yield system 24 hrs in 5.5ph water and then directly into grow plug they go. 👍