The Grow Awards 2026 🏆
Likes
Comments
Share
Likes
10
Share
Likes
17
Share
Que hay familia, actualizo la sexta semana de floración y última de estas Runtz F1 automáticas de Zamnesia. Vaya liada de floración, la luz… los nutrientes… la tierra…desperdiciada, no me gustó mucho este proyecto, la verdad es una variedad poco resistente y además se quedan enanas, las flores también son enanas y no son nada prietas ni gustosas. La temperatura está 25 grados y la humedad anda entorno al 40%. Riego cada 48 horas. Hasta aqui todo, en unas semanas actualizaré ya la cosecha y la smoke review. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Hasta aquí es todo, buenos humos 💨💨💨.
Likes
18
Share
@dalemac
Follow
Things are starting to slow down vertically as she starts to flower more profusely, but she still grew about 5" last week. I did a little minor league low stress training by just pulling some of the branches down that were growing vertically near the main stem. Very pliable. Will probably do some interior lower pruning in the next few days. We're coming out of a pretty hot spell with a few days in a row in the 90s. September 1 > performed a substantial amount of pruning in the interior and base of the plant. The plant had a lot of vertical runners clogging up the interior.
Likes
15
Share
Day 55 of flower 1 and 3 are finishing off a bit earlier then expected, so I started my flush to get ready for the harvest . 2 and 4 i belive can make it to day 65. #4 looks like it's parent, Purple Urkle. #2 looks like GDP So I think I will he keeping 2 and 4
Likes
16
Share
5ta semana 12/12 #greengelato by RQS. Alimentada con Quemanta nutrientes bajo un spectrumboard de 75w de los chicos de heaven Grow ligths.
Likes
Comments
Share
Hi liebe Community and Welcome Back! 💚🌱 We proud to present the second Strain from Good Times Genetics! Die Wuchsform der Pflanzen wirkt bis jetzt sehr homogen, es ist zu beachten, dass natürlich die einen etwas schneller wachsen, wie die anderen. Auch die Stielbreite unterscheidet sich etwas. Insgesamt wirken die Jungpflanzen allerdings sehr kompakt, was eine gewisse Indica Dominanz vermuten lässt. Das ist auch so gewollt. Ich werde immer wieder verschiedene Pflanzen der gleichen Zucht dokumentieren und nach der Geschlechtsbestimmung dann Herausfiltern, welche zwei Pflanzen für die Fertigstellung des Diaries in Frage kommen. Die Wachstumsbedingungen im Growzelt sind weiterhin am Optimum und Stabil: ——————— 🌞 Temp: 23°C 🌚 Temp: 20 °C 💨 RH: 58% VPD: 0,86 kPa 😎PPFD: 330 mqm ——————— Stay Tuned! 💚
Likes
8
Share
This run went a lot better than expected. There were lots of problems while in a rush to get the new grow going. But once everything was dialed in, everything started booming! The next run should even put this one to shame with the much healthier plants in the veg room.
Processing
Likes
41
Share
Welcome to the Sweet Seeds Cup 🏆 Hi everyone 🤗. This week she started scattering her Kush aroma 😍. It has developed very well this week. The buds are getting bigger and more mature. She stopped growing in height, but now she is putting all her energy into forming the buds 👍. I will start to slow down the fertilizer from next week :-). Until then, I wish you all a nice start into the new week, stay healthy 🙏🏻, and let it grow 🌱 You can buy this Strain at : https://sweetseeds.es/es/ Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
82
Share
Hello growmies! Welcome to week four of An Epsilon Adventure! The girls are already transitioning into flower, I will get some photos of that later in the week. Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow. Daily Updates: ### Week 4 Day 1 11:00 16/7 Removed some lower growth. ### Week 4 Day 2 23:00 17/7 Tallest plants were showing signs of heat stress so I have raised the light about 30cm more. Unfortunately this now means the lower plants aren't getting as much light as they could, so I have put the cycle back to 20h (I may even increase it). ### Week 4 Day 3 14:00 18/7 Photographed. ### Week 4 Day 3 19:00 18/7 Fertigated 2l. Okay these girls are now starting to concern me a little on the basis that they are supposed to grow to "50-70cm". At just over 3 weeks old the shortest of these girls is 53cm, the tallest (plant 3) is now 76cm tall. The worrying thing is they do not at all look like they are slowing down and as they are just pre-flowering now, the flowering stretch hasn't even started. So I need some genuine advice here now: Do I keep the faith and hope that they don't exceed the space I have? Do I top or super crop them now? These ladies are beastly, at the end of the week I am going to take some individual videos and more photos to really try and capture how magnificently well these girls are doing. I think I may be in the process of growing the biggest Epsilon F1's so far? Exciting to find out! ### Week 4 Day 4 21:00 19/7 James has assured me they wont go much more than 85 so I am not going to mess with them. They are due a defoliation at the end of this week though. Measured each plant as follows: Plant 1: 81cm Plant 2: 75cm Plant 3: 80cm Plant 4: 67cm Plant 5: 59cm Plant 6: 58cm Might photograph later or leave until tomorrow. ### Week 4 Day 5 10:00 20/7 Photographed and measured. Plant 1: 85cm Plant 2: 79cm Plant 3: 81cm Plant 4: 71cm Plant 5: 63cm Plant 6: 63cm So they've all grown about 4cm in about 13 hours, except plant 3 - which seems to have slowed down a lot. The top of plant 3 is also the most advanced looking in terms of pistils. I forgot to take close ups of the preflowers I will do that tomorrow. I have had to raise the light again today and it is now much further away than the younger plants than I would like. So I am thinking about adding a 300w LED into my 4x4. I have another 3 inches I can raise the light on the hangers, after that I can removed the adjustable handers and tie it to the top of the tent... that'll gain me another 4 or 5 inches. If I need to go higher my only option would be to set them up without the tent which is not an option right now. Hopefully they all just stop getting taller now and focus on flowering... but my gut tells me there's more growth to come. Watch this space! ### Week 4 Day 6 15:00 21/7 Measured. Average 10cm growth 29 hours. 😳😳😲 Plant 1: 96cm Plant 2: 89cm Plant 3: 88cm Plant 4: 81cm Plant 5: 73cm Plant 6: 72cm ### Week 4 Day 6 23:00 21/7 Defoliated. Only photographed plants 1 and 2 individually as I was short on time. Some lovely pics though! ### Week 4 Day 7 15:00 22/7 Fertigated. 2l Will photograph and measure later when they've had 24h since training. ### Week 4 Day 7 23:00 22/7 Photographed and measured: Plant 1: 102cm Plant 2: 93cm Plant 3: 89cm Plant 4: 85cm Plant 5: 76cm Plant 6: 75cm Well here we are at the end of week 4 and I am quite shocked by the growth of these girls. This strain averages 50-70cm in height. We have six plants here and every one of them is taller than the average... but would you just look at plant 1? She is a giant! 102cm!! Where will she stop? Next week will see the full transition to flower and we will start to see the bud sites developing. I have no idea at this point what the heights will look like at the end of next week. This is sort of new territory really, they weren't meant to get this big! --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========
Likes
45
Share
@PotCasso
Follow
Week 1 of Flower: HLG Diablo at 60% 22in from canopy. Watered in at 700ml top dressed 1tbs grow, 2tbs bloom, 3 tbs barley a recharge day and a silica day. All the girls look happy and have turned up filling in all the squares.
Likes
12
Share
Wedding cheesecake FF by Fast Buds Germination, days: 3 Vega (18/6), days: 35 Flowering (12/12), days: 70 Total, days: 108 Ec 2.5 (Athena bloom, Fade, Cleanse, Balance) Ph 6.1 Red 100% Blue 25% UV 20% DLI ~32 T. Day: ~25C T. Night: ~21.5C Humidity: ~57% T.leaf: 24.5C Week progress: I can't delay any longer, the chance of mold increases due to dry leaves. On the last day of the 10th week of flowering I started washing the substrate, washed with RO water + Athena Cleanse (2ml/l). Tomorrow I'll wash again and harvest on the next day! For now I'm planning to cut off those two lagging plants, but I might change my mind :)
Likes
15
Share
@Uwish
Follow
With the last heat wave, I had an answer to one of my questions, clearly my chiller is not doing the trick. I have water temperatures that went up to 27°, which is way too much, the plants deprived of oxygen, started to declare several deficiencies due to an assimilation slowed by the lack of oxygen. It is then that a nasty fungus came to say bijour, it is me MR pythium! It was necessary to act, at the risk of having to restart the culture. So I applied hydrogen peroxide and ROOT ROT X, and both products are doing harm to this nasty pythium, things are now back to normal. On the other hand, the plants had a decreased growth for 10 to 15 days, so I'm going to extend my growth for 10 to 20 days, that is to say 1 or 2 soups, I'll choose according to the root development of the plants. Before going to flowering, I have to catch up this delay in order to make a nice crop.
Likes
2
Share
Likes
10
Share
@tokesly
Follow
More Flowering! The rest of the strains started to catch up, but nanners started showing in the hermies and TP started to overripen with orange hairs. I would've gone extra days if there were no nanners, but it wasn't worth it to risk seeding the nugs, I'll just have to settle with more larfy buds. Going to start flushing next week.
Likes
8
Share
@Baba_VJ
Follow
Update: All plants are progressing well. I've been updating my diary for the two additional strains I started with. Despite some early mix-ups, two are now flourishing and ready for transplanting. I’ve buried the seedlings up to their first true leaves and will soon introduce root juice to assist with the transplant process. Cinderella Jack is heading for a 25-gallon pot, given its robust early growth and a longer growth cycle of up to 14-15 weeks. On the other hand, Auto Euforia and Critical Orange are showing slower development. Euforia is stubbornly pushing through with new growth despite a challenging start. To sum up, I'm managing six plants from four different strains: one Cinderella, one Skywalker, and a mix of Critical and Euforia. I’m confident I've identified at least one of each. Four plants are on target for a decent yield in their 3-7 gallon pots, while the other two will serve as trial plants. I expect the arrival of new nutrients by next week, but for Cinderella and Skywalker, I will continue their current feeding schedule for an extra week since they're slightly ahead of the rest in growth and still will be in 2nd week by week 3 mid. IDK how helpful is 127 LED E27 bulb but something is better than nothing. Will be shifting to indoor after fall so saving for a pretty decent setup now. More updates to come. Any tips or suggestions for a first-time grow in a greenhouse setup would be appreciated!
Likes
78
Share
@Hou_Stone
Follow
👨‍🚀Salut les copains,👋 🌞 Nous sommes au 38ème jours de floraison, Lors de ma visite j'ai été surpris par le changement de couleur de quelques feuilles sur les plantes. 🤔 Je n'ai pas beaucoup le temps de m'en occuper en ce moment, je passe juste les arroser et prendre quelques photos. Intensité de la FC3000: 90% Ventilation : Extracteur mars hydro 6 pouces avec filtre à charbon puissance : 4/10 (24h/24h) + 3 ventilateurs à l'intérieur ( ON 8/24h). ils s'activent à un horaire différent. J'arrose environ tout les 4-6 jours avec 1.5L d'eau. (+ 1gr de bioenhancer/L eau un arrosage sur 2) Venez me voir sur Instagram ✌️ https://www.instagram.com/hou_stone420/ 🌺💃❤️️❤️️🌺❤️🌺❤️️❤️️💃🌺