Welcome growers The first month of life is ended for this beautiful CREAM CARAMEL 🍬🍭🍫 She still one of the most vigourous in my garden and, like the previous weeks, very happy and healthy A few days ago i have decided to modificated her grow doing some training and, for be precis, i cut of the central stem, making of the topping technique ✂️ I would to have the same heightnes for all my ten strains in the garden and so, i decided to do it for all my ladyes (except one) I have also cut a couple of leafs off, not too much for now, just for increase the airflow and for a higher lights exposure of the lowers parts 🍃 And she reacts pretty well 💪 For helping in this "hard time" i have also changed anothers things, like lights intensity and types of nutrients.. About the lights 💡 Doing that, i have increase the potency of my two Mars-Hydro SP3000, from 25% to 50% ⬆️ The two led panel are connected with a cable and i have only to adjuste the dimmer of one of them for change the intensity of each one, in just one move.. Pretty useful 💯 In the middle of the week i have switch from 18/6 on/off to 16/8 on/off.. Always tryed to mimic the natural cycle of the sun light, works good to me 👌 Anyway.. About nutrients 👇 In this week i have giving her always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) and a little bit of P-K 3-5 (Bionova) {This last one i have used in a foliar spray solution} Like i usually do, a little bit of everything at any watering 💧 See you in week n°5 upgrade 📆 Thanks a lot for stopping by here, hope you enjoyed 😎👍 FC ✌️ 🇮🇹

Se nos fue un poco de altura pero intentaremos arreglar el error farmers... al final quedo simplemente en podas apicales y de momento ramas muy finas. Iremos comentando el proceso Farmers!

==> Decreased the base nutrients for less Nitrogen She is doing great! Smelling stronger and with more personality than last week :D There are not many calyxes but they are swelling slowly and nicely :) Starting to get some purple colors in the buds already :D Her branches are thin and buds are gaining in weight so she is starting to fall! I will tie her up soon :D

1/14: This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 Both "A" and "B" put on an inch overnight. Now that the soooperstunted mutant runt is acting like a normal plant, so henceforth I'll refer to her as "C." 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 I moved #3 into the tent with my DWC rig to veg a little longer. 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiences here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. #3 is still vegging in my SCROG tent with the #8 FFT DWC plant. She's coming along, but still not ready for prime time.. That's it for week 4-

I think the plants finished their stretch this week. The buds are now getting bigger and some trichomes have appeared on the leaves next to the buds 😎 The smell is also stronger than last week. I have some small issues with the plants. Yellow/brown tips for the Blackberry Cake and the Cashew Kush and yellowing leaves for the Jack Herer. The BioBloom seems to slow down the issues so I hope it will be alright. The previously broken branch of the Cashew Kush was not flowering so I removed it. On the other hand, the Blackberry Cake nicely recovered from the LST strings marks 💪 Plants heights at the end of the week : ------------------------------------------- Blackberry Cake : 80 cm Jack Herer : 59 cm Cashew Kush : 83 cm

Did my last topping on a few branches that were left took most of the big fan leaves off to open them up more i forgot to do a week lol.

Letting this one go untopped. Removed some of the lower most branches today. ✂️🌿 Shes looking happy & showing signs of sex after 7 days in 11/13.♀️ Looking forward to seeing what this baby produce.🌺

Flowering week 1

Day 30. Continuing general Hydroponics maxigro every other watering. Half the recommended dose, til 15% runoff.

Day late on the update, pics/vids were taken on time tho just been a crazy week of harvests and trimming and keeping up with these. I linked up with Rain Science Grow Bags on Instagram and got them to offer all my followers and friends a discount of 10% off entire order from their site with the code ' bangdang ' so if anyone is in the market for a pot upgrade use that code. I got them in the mail 3 days after I ordered. Reason I went with Rain Science is because they offer identical air flow for rapid growth as the radicle bags, just using a different material and a tighter knit so water doesnt flood out the sides during feeds and when you pick these up when the coco is dry, it wont fly all over the tent like with the radicles. They're the optimal bag for autoflowers especially. I figured out why the one stayed so short compared to the others, the base of the stem did a 360 so it's like a loop then it grew vertical.

Brocoli buds!🥦 Super sticky & delicious smell its just sweet🤤 When you smell the amnesia Z she seems to be kind but trust me roller coaster effect !🎢

Really nice that u check this page, its very much appreciated, thanks! This week all is in flowering and the flowers now quickly getting fat! Ive started with nutrition: Sea weed 15ml/10L P 8ml/10L Bloom 30ml/10L Molasse 20ml/10L Silicium 10ml/10L -----------------Purple Haze ----------------- Purple Haze Purple Haze ontstond in de jaren zeventig in de Verenigde Staten en is vernoemd naar het bekende nummer van Jimmy Hendrix. Purple Haze was de meest gerookte wiet bij Woodstock en een wereldwijde favoriet onder rokers. Ook in Nederland werd deze cannabissoort steeds populairder. Deze populaire haze soort zie je vaak in Nederlandse coffeeshops. De toppen van de Purple Haze wietplanten zijn compact met prachtige THC kristallen en hebben paarse tinten. Het roken van deze wiet maakt je euforisch, creatief en geeft je een opbeurend gevoel. Het effect is krachtig en merkbaar als een sativa high gevoel. Eigenschappen van Purple Haze wietzaden Favoriete haze soort Sativa dominantie Heerlijke smaak Mooie paarse kleur Sativa high Informatie Purple Haze wietzaden Bloeitijd: 9-10 weken Genetica: Haze x Afghan 80% sativa, 20% indica Plant Hoogte buiten: 150 – 200 cm Oogstmaand buiten: van juni t/m oktober Opbrengst binnen: 450 – 500 gr/m² Opbrengst buiten: 200 – 800 gr/plant THC: 21% Link naar de shop: https://seedsgenetics.nl/product/purple-haze-gefeminiseerd /

Last week before chop! I took a tiny test bud off and it smoked up real nice. you can tell by the buds that its going to be a rompa of a strain, thanks fastbuds grab your own at there site.🔥 2fast4buds.com I seemed to get the phosphorus problem under control, i made the mistake of not ph'ing my water after adding ph down.

First 7 days of the Strawberry Gorilla from Fastbuds. She was germination in glass of water than move to cotton and in 2 days it had more than an inch of root so i moved to her home 12 liters pot with biobizz,coco peat and perlite for the vegitation she will have the Marshydro Ts 600 in 80 x80 grow tent.

3 weeks :) The girl looks healthy and happy, now I'm looking forward to her rapid growth and she will get bigger :) Everything is going smoothly :) it will be an interesting experience, because this time I probably won't use LST at all, I haven't tried letting her grow naturally :) good luck to everyone

🇩🇪 14.12. neue Woche neues Aussehen :) zwei Sonnensegel die nach oben zeigten entfernt, damit die inzwischen 4 seitentriebe etwas licht bekommen. die Drähte die letzten Tage über immer mal wieder neu justiert. Und vor ein paar Tagen zwei „Anker“ an den Stamm gesetzt damit die Pflanze bleibt wo sie ist. Durch den zug auf der anderen Seite hat sie angefangen sich dort mehr rüberzubiegen. Ansonsten macht sie sich ganz gut es läuft mehr oder weniger nach Plan. Happy Growing💛✌️ 🇬🇧 12.14. New week, new look :) I removed two upward-facing fan leaves so the four side shoots could get some light. I've been readjusting the wires a few times over the last couple of days. And a few days ago, I added two "anchors" to the stem to keep the plant in place. The tension on the other side had caused it to start bending more. Otherwise, it's doing quite well; things are more or less going according to plan. Happy Growing💛✌️

as it is so important to let the plant develop its roots, i wait a few weeks to do the first topping so the plant has better conditions to recover. The topping helps to stimulate the growth of the plant itself. This method may "stress" the plant but actually stimulates it. But doing this we are delaying its growth, that is, it takes a little longer. But no problem! Then after a few days She Will be transplanted to the final por. what do you think ? looks weak, doesn't it? don't be fooled. in the next entry you will see how it looks... a monster 🥦🥦

New week for Anesia Hyper glue Anesia Hyper glue is doing great topping is done and doing some last LST on them preparing them for flowering soon cannot wait 19/10/2 made 360 video today enjoy🤣 20/10/21 Thinking of switching to flowering soon don't want them to grow to big in 8L pots 21/10/21 Decided to order some 11L pots to transfer them in so before flowering i probably transfer them so roots can grow some more also gone try Mycorrhiza Mix with transfer More photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

The video is the timelaps of the full grow