Likes
18
Share
@OZDAOgrow
Follow
They're certainly more comfortable in a foursome. I trimmed the bottoms. The girls began to develop faster. I also added one more drip irrigation pipe to each bush.
Likes
38
Share
@MrLahey
Follow
So far all is well. Left plant is looking great still. Right plant is still the same as it was, kinda "off." I cut the top off the main cola due to light burn. There's just no way that the plants energy it was directing to it was being used well. I'd rather it go to the rest of the plant because there's just no way that initial top was going to produce anything. It was gnarled. I've also noticed something odd going on with a couple of the buds on the stressed (purple) plant. I posted one of the pics in the pics for this weeks update. Looks kinda like bud rot to me but this is also my first grow so I could be wrong. It looks like it's only affecting the pistils. I may ask a question in the question forum just to be sure. It's odd though because conditions in the tent seem to be too dry maybe for bud rot (averaging in the 50-60% RH range and there is plenty of air circulation in that part of the tent. I'm thinking it could either be the plant negatively reacting to me cutting the main top off the other day or it's just the fact that due to the plant being stressed out for the entire grow that it's lost resistance to things like bud rot, etc.. essentially, I'm not sure at all lol.. Both plants are already showing a good amount of trichome production as the plants have almost switched from stretch flowering phase to pure on flowering/bulking phase. I can't wait to see the buds really start to mature and grow and get stinky. Carbon filter so far is working flawlessly. A week ago I was thinking it wasn't keeping up because when I'd come home from work I could smell pot but it turns out it was just my cannabutter supplies that I left out lol. D'oh. I've also been monitoring conditions in my basement over the past few weeks and have noticed that rain or no rain, the conditions down there are an average 66 degrees and 60-64% RH. With my dehumidifier if the conditions down there remain in that range, I should be able to achieve perfectly optimal drying conditions for when I harvest in 4-6 weeks or so. :) I am having a blast so far and can't wait to harvest and then really apply what I've learned online from youtube, here and reddit combined with my hands on experience from this grow to really fill out the canopy next time and also ensure both plants are the same height for some great yield. I'll probably mainline 2-3 plants for my next grow. I also want to eventually get into building my own soil and amendments but for now I'm just focusing on not learning & applying too many things at once. I just know that at some time I'd like to switch from synthetic nutrients to organic. I'm hooked for life to growing though!
Likes
24
Share
At day 44 plants were watered with about 3 liter of fresh water w/o any nutrients. I measured TDS of the drainage, it was kinda high, about 1600 ppm. But plants in general seem to be in a good condition. I had to remove some leaves to improve air flow and give more light to lower buds. I think in a couple of days I'll add some nutrients for watering, so I'll update this week description. Only B.A.C. foliar spray was used by the end of the day. Both plants show that coloured genetics and look amazing.
Likes
115
Share
From Tiny Seed to Thriving Cherry Cola Auto: A Fast Buds Adventure! My friends get ready for a Cherry tail and one i am depply curious about it and about all <3 <3 <3 In the world of cannabis cultivation, there's nothing quite like watching a tiny seedling transform into a vibrant, budding plant. Today, we're diving into the magical journey of germinating the Cherry Cola Auto from Fast Buds Seeds. Not only are we exploring this fantastic strain, but we're also sending a shout-out to the folks at Fast Buds Genetics, thanking our sponsor, Aptus Holland, and celebrating the supportive community on Grow Diaries platform. So, let's get our hands dirty and dive into the exciting world of cannabis cultivation! We kicked off our journey by gently placing our Cherry Cola Auto seeds in a glass of H2O, like they were taking a refreshing sip of life. The seeds soaked up the water, and after just 24 hours, we witnessed the first signs of life - a tiny taproot emerging. It's like nature's own alarm clock, signaling that the adventure had officially begun! After seeing that adorable taproot, it was time to find a cozy spot in the soil for our Cherry Cola Auto. We prepared some nutrient-rich soil and gave our little green friend a warm, loving home. With a tender touch, we planted the seed, taproot down, and covered it with a light layer of soil. It's like tucking in a baby, ready for a long and restful nap. In just three short days, our Cherry Cola Auto broke through the surface, eagerly reaching for the world above. It's almost like the plant knew we were excitedly watching, and it didn't want to disappoint! The tiny cotyledons unfolded, revealing their first set of true leaves, and our hearts skipped a beat at the beauty of this young life. Before we continue with our Cherry Cola Auto's growth journey, let's take a moment to send some love and appreciation to those who've made this adventure possible. Fast Buds Genetics: You've created a masterpiece with the Cherry Cola Auto. This strain is a testament to your dedication and expertise in cannabis genetics. We salute you for bringing such a delightful variety into our lives. Aptus Holland: We couldn't have embarked on this journey without your support. Your sponsorship has provided us with the top-notch nutrients and care our plants need to thrive. Here's to a green partnership that keeps on giving! Grow Diaries Platform: To our fellow growers and the supportive community at Grow Diaries, thank you for being our digital companions on this journey. Sharing our experiences and learning from each other is what makes this adventure even more enjoyable. Conclusion: As we wrap up our germination report, it's clear that the Cherry Cola Auto from Fast Buds Seeds is off to a fantastic start. In just a few days, we've witnessed the magic of life emerging from a tiny seed, and we're excited to see what the future holds. This journey is a testament to the joy of cannabis cultivation, the power of quality genetics, and the support of an amazing community. So, to Fast Buds Genetics, Aptus Holland, Grow Diaries, and all you fellow growers out there, here's to the endless possibilities that the world of cannabis cultivation offers. Let's continue to nurture our plants, share our experiences, and grow together. Cheers to the Cherry Cola Auto and all the amazing strains waiting to be discovered! Happy growing! Genetics Cherry Cola Auto @Fast_Buds @fastbuds_genetics_official @fastbuds_official @fastbuds_espana Nutrition: @aptusholland @aptus_world @aptus_ Love, Care, and Attention: @dogdoctorofficial As always, thank you all for joining me on this journey, for your love, and for it all. My horticultural odyssey would never be the same without you. Your love and support are cherished, and I feel both honored and blessed to have you in my life <3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove #fastbuds #specialplants #homegrown #fastbuds #cherrypie #CultivatingBeauty #NatureArtistry #HomegrownMagic #GreenPassion #JourneyWithPlants With true love comes happiness. Always believe in yourself and always do things expecting nothing in return, with an open heart. Be a giver, and the universe will respond in ways you can't even dream off. Friendly reminder: all you see here is pure research and for educational purposes only. Growers Love to you all <3 <3 <3
Likes
51
Share
Hello All! I'm BACK! I took a month off and I am so ready to get back to growing. I am adding a couple of things this grow different from my last. So look for some of the new things I am implementing. For starters! This time I will be growing from a seed. I purchased my seeds from Seed Supreme. The strain I will be growing this time is going to be SKunk#1. The Skunk#1 that i am growing this time is an Auto Flower. Two things are already different. Germinating from a seed, and growing an AutoFlower. 10/30/23 - Day 1 - Right now I chose to setup my heat mat, put the dome over the mat and put the water cup on the mat. I'm going to let the seed soak for 24 hrs. Tomorrow ill pull it out and put it in a damp cloth in side the dome with the heat pad. 10/31/23 - Day 2 - Happy Halloween yall! This is a good sign, less than 24hrs and the seed has already started to open. I got a paper towel wet, and I moved the seed to the paper towel. Ill keep her in the wet, paper towl. In the cup. Thats on the heat mat under the dome. Important to note, the heat mat is set for 120deg. Its off the ground on a table. I leave it on 24/7 during this whole process. 11/1/23 - Day 3 - I'm Really impressed. She already popped and sprouted a tail! I'm going to wait until her tail is sticking out a lot more before moving her to the LEAF box. So a couple of things got done today. I wanted to set up my Leaf box differently this time. Last grow I use the manual options for water and humidity. I was the person who would refill the water and the humidifier. This time I ran all the correct PVC to allow the Leaf Box to use the automatic process. I should be able to be super hands-off this time. I have an RO water system that I set up to feed the Leaf Box. I posted a Video of me taking the seed and planting it into Rockwool. I could start the Leaf box up now, but I want the seed to grow a bit more. Right now it's still on a hot mat, with plenty of water. I also added some Root Armor. 11/2/23 - Day 4 - The top of the seed is already starting to poke out. This seed has no chill.
Likes
14
Share
@Darsilius
Follow
Dear Growers :o) Im back with report. I can recommend this strain for many reasons ! First of all i would like to summerize the grow. The plant was first in my garden outdoors, where i did plant to measures of the 70x70 tent. That bring som eproblems at start with bugs and other stuff, but we survived! Next and last was my mistake to mix soil and coco, because when the coco dries it brings over nutri problems. I will learn from my mistakes and hopefully continue with next gro documentary here. Now im sure i will move from tent to regular furniture custom grow box, to be as stealth as i can and to prevent noise in the flat and smell... The strain : BCN Critical is really great plant , very potent and with nice orange trichomes. Covers with sticky and glossy resin. At the end of the flowering i hit in the box 75% of humidity and mold started in few buds, but in this extremew conditions. on the other hand i have few plants still outside and they are compeltely healthy (15 degrees during day and 90% humidityx near the river) so I can recommend this strain. the outcome from the one plant in the box was 132g ( 60g of big 3-4g buds) the rest are like tip of finger im satisfied with the result under 200W led lumii black light ! the smoke is really clean, with citrus touch, smells very strong from smoke, but the best is from vape! After few puffs You can feel uplifting high, then relaxed. Not my favourite terpenes profile, but really interesting. after 2 hours U can smoke again :).In compare with outdoor harvest its not so heavy to body high. thanks for watching my diary and keep growing !
Likes
25
Share
Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Plant keep growind a bit, and buds keep coming along and frosty 💡 💡I've removed 2 hours this week, in 2 times, 1 hour start week, 1 more hour removed mid week, because I'll have soon some photoperiod in the tent, ⏰️ 20/24 On 💪 Not too much work, just removed some leaves. 💧 Give water each 2/3 day 1.5 l Water + Roots + Bloom 1.5 l Water + Roots + Bloom + Sugar Royal 1.5 l Water + Roots + Bloom PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 46 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html
Likes
13
Share
@NAG420
Follow
She strong little thing this the 2nd seed I planted of this strain the 1st one didn't pop for me idk why. Only spray and bottle watering her for right now she is in a 5 gallon pot don’t want to over water the pot and cause nat or mold issues. Today is the 1st day of the 2nd week. Dome came off the past few days also.