The Grow Awards 2026 🏆
Likes
Comments
Share
@Filiaes
Follow
12.05 As I already wrote last week the autopot system is now in production and I only take care of the solution in the tank. The PH lvl raised by the last day, so I am now at around 6.3 which is a good value in my opinion. I raised the base EC a bit with Canna Calmag since I gave around 30% more into my water. Base EC was around 0.6 and is now at 1.3 after adding the Hesi scheme. In my other grow there are slightly magnesium deficit, that's why I decided to give a bit more of canna calmag into my osmosis water. 17.05 Defoliatet for the last time.
Likes
16
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 68 since the time change to 12/12 h. Hi everyone :-) . We arrived last week :-). The trichomes are 70% milky, 20% amber and 10% clear. The nutrients have been used up and the lady is allowed to stay a few days before she comes into the darkroom for 48 hours before the harvest. Of course there is an extra update for this :-). Otherwise the week was poured 3 times with 1.2 l. The tent was cleaned and all women checked. Have fun with the update and see you next time. stay healthy 🙏🏻 You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8
Likes
41
Share
15 Day dry then trimmed using the Trim Bin. Curing with Grove bags, first harvest filled 3, 1/4lb grove bags. *Updating with clone pictures of this pheno in late flower labeled in diary as you look through, If I pop a new seed of this strain Ill start another diary
Likes
66
Share
@Neo09
Follow
Such a Wonderfull 17.7. 🙌 This week was a bit harder.. We Just solved problem with "mushrooms" on leafs.. And we were 1,5 Day without energy... 😶 But ladys are great and strong! We have done as well Scrog with Tangie's. Maybe a bit later, but it so 🤷‍♂️ have a fun by our growing
Likes
55
Share
@Belverde
Follow
Welcome growers And also the tirth week of life is finished for this three ladyes, three phenos of SORBET#4 🌿🌿🌿🍧 I have decided to show you the all family, so , in this way we can see if they show some differences 😉 For now I have two pretty similar, with a large leafs and internodes very close to each one.. And another one a little different , more Sativa in aspect, with a large structure that increase the lights penetration, which means more growing for the lower branches 💯 Anyway.. In the begining of the week I transplanted into a 3l plastic pot.. Usually my choice of pot is the smartpot or the airpot 💯 And therefore, considering that the soil will obviously remain less aerated than usual, I have chosen to use a greater quantity of coco coir in the substrate I roughly prepared a mix of 50% light-mix (Canna professional and Biobizz), a 30% of coco coir (Atami), 10% worm-cast or humus (Atami) and around a 5% perlite wich it's already present in the light -mix.. I have also put a few micorizzae (Micosat F), like 10 grams, in direct contact with the roots and around 4 grams of Microlife (Bionova) in pellet form I will use this last one also for making an areated Tea, but during flowering.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. Root-Juice (Biobizz) and Rizostimo (Biomagno) for the last time, plus a little bit of silicium (Bionova) and then Activator (Biomagno) / Crescita (Biomagno) / The Missing Link (Bionova) / X-Cell (Bionova) {This last two i have used in a foliar spray solution} Simply a little bit of everything at any watering 💧 About the lights 💡 I currently using for the first time, two Mars-Hydro SP3000, running at 25% of the power for now.. Next week im going to increase at least to 50% ⬆️ Onestly this lights looks pretty solid, definetly intense, with a spectrum really close ro the sun light One of the cool things about it it's that you can connected each one toghter with a cable and so you can controll the intensity of the lights very easy, in a precis way 👌 We will see in this months how they works And that's all.. See you in week n°4 📆 Thanks a lot for stopping by 😎👍 FC ✌️ 🇮🇹
Likes
2
Share
Jelly cak3 is the new name I came up with lol. But this week is going good. I decided to give her a super chop. A little grow science can’t hurt right. I’m hoping this makes the bud bigger,dense and delicious
Likes
23
Share
Got them in pots on Wednesday, they're happy and growing like crazy. I buried them deeper in the 5g so they're growing out more than up right now. Getting hard to regulate temp and humidity in that tent as it's colder outside.
Likes
2
Share
Venga familia que ya viene la cosecha de esta Amaretto Tarmac de Seedstockers, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte se ven bien resinosas, y tienen un color rosado púrpura brutal. a sido una genética con la que disfruté mucho cultivarla, no es complicada de cultivarla pero merece la pena si eres cultivador con experiencia las flores serán increíbles. Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
16
Share
Got everything hung up. Stripped the fan leaves and broke down into sections. Run 60/60 or as close as i can get until the stems snap.
Likes
4
Share
Continue to leave her grow, got my dli at 35 currently..
Likes
10
Share
@BossHogg6
Follow
The roots are still looking great. I cleared the old water out and only put 2 gallons in and not the 4.5 I was putting in previous weeks. Starting to get a weak smell from the plant.
Likes
38
Share
For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.
Likes
5
Share
Plants are growing strong. Gotta do some trimming. The smell reminds me of old school weed smell.
Likes
16
Share
Final Report: Grow: The plants has grown very beautiful and healty without pests and diseases. They grown bushy and with medium height during all the life cycle. I had try to use LST in third veg week but i did't made correctly and after that i dicided to return to grown normally without any particolar tecnique. I used a littel more fertilizer then mine usual and that made the plants grown fast with only a littel bit of leaf margin burn which I solved by decreasing the quantity. In the first two weeks of flowering stage the plants started grow not to very tall (except for one) and the number of the branches increase, in this phase i only defoliated when the fan leaves turn yellow in late stage. During all flowering stage the flowers grown but they remained very soft, they turned dense and bigger in the last weeks and this time i waited until almost all of them were mature before harvest the plants(I waited a littel more respect OG Kush CBD). I changed the taller plant from one grow room to another(in the sixth week) when she became too high and she couldn't stay more in the smaller grow box(nothing changed in the enviroment between the two boxes). Equipment and grow box: The enviorment of grow box has been optimized every stage with the right temperature, umidity and air flow. Vegetative temp/umidity --> 23-29 °C/45-55% Flowering temp/umidity --> 20-26 °C/40-50% The air flow was created by two pc fans and one big fan. Harvest: This time the plants were full of dense buds but the lower branches had many fluffy flowers(i used them to make some hash) but the result not change too much . The result of this grow is amezing compared to my old expiriences. I harvested the flower and i made a fast curing process after i washed the crop and i let them to dry with a fan on it. After five days a take the branches which were to dry and i did the final trimmig before put all the harvest in a open jar for finishing to dry. I collected all the leaves, fluffy buds and trimming scraps in a bag and i let them dry. I harvested the taller plant before the other two because she had matured earlier(with the OG Kush ladies). Later i put the bag in the freezer and when i collect and dried all the scraps from OG Kush and Dandoverde Haze i did some Ice-O-Lator hash. I used 250g of trimming stuff and i made 11.50 g of hash, I had use a set of 5 bag and i take the resin from the 160µ - 120µ - 73µ- 25µ bags. I pressed all the resin in a great block of tasty strong hash. Always better every time 😊💪 Total harvest ---> 126g only of dense buds and 11.50g of hash.
Likes
6
Share
🌱 Finalizando la semana 3 y con buenas noticias 🌱 Efectivamente, esa carencia que venía notando estaba relacionada con calcio y magnesio. Después de añadir Calmag, las plantas empezaron a mostrar más vigor y mejor desarrollo. Hace unos días realicé el trasplante a macetas de 11L, probablemente las definitivas, aunque esto dependerá de cómo avancemos en las próximas semanas. 💪 A partir de ese trasplante, también comencé a incluir BioGrow en el riego, para potenciar el crecimiento. 📝 Dato útil: Antes de trasplantar, esperé a que el sustrato estuviera un poco más seco y compacto, lo que facilitó muchísimo el proceso. Luego, en ese primer riego post-trasplante, aproveché para aplicar fertilizantes. ¡Seguimos avanzando y viendo los cambios día a día! 🚀🌿
Likes
32
Share
@Ksouth1
Follow
Last week went well. She is stacking on the bud mass and is looking great. Her smell is very unique and her buds look like they will be massive. Not much else to say about her besides I had to tie up her buds because they are getting too heavy and were bending the branches. Looking forward to seeing what she produces and becomes. Until next time happy growing to everyone!
Likes
4
Share
@Kekkonen
Follow
Two of the plants had little bit of powdery mildew so I defoliated those leafs. Also sprayed them with baking soda, liquid soap and water mixture. Hopefully we don't find any more of that. Otherwise everything seems good they are healthy and growing well.
Likes
4
Share
It's been a wonderful journey, I'm very happy about this lady's performance, she has produced a high quality harvest, low quantity but I didn't maximice the space as good as I should, but definitely a wonderful genetic to grow, the flowrs are super sticky, full of trichomes and the smell is just the clasic amnesia smell you expect.
Likes
2
Share
Very Early flower about to some 50/50 284 dry amendments next week apart from that just been using my tap water not been pHing and shes been happy as rain