Hermosa floración mucha resina Defoliación para permitir mejor ingreso de luz 25 - 31 agosto

Day 43 of flower and its looking good moved some branches around to improve light penetration love to Hear from you guys in the comments Day 44 ph 6.1 ppm at 350 Day 46 ph 6.3 ppm 270 Day 49 ph 5.9 ppm 300 removed the nuts added the dense nut at 300ppm will do this for 2 days and flush after that for a week or so so close to done one of the tops of the small plant got bud mold was removed hope it will be the only one to happen to

My Permanent Marker plants are looking good. The short and stocky one has turned a crazy shade of purple. It's really wild looking. The other plant is still putting on new growth, so it'll probably be ready in about two weeks. I can't wait to see how the purple one smokes – should be interesting. The past week has been awesome for drying my plants. The weather's been perfect – nice and dry, with just enough breeze to keep things moving. I finally got around to chopping down those two big plants I've been meaning to trim. They're almost ready, just need a little more time to dry out completely. I can't wait to see how they turned out.

7 eme semaine tout se passe parfaitement bien, très peu de place quatre pieds J'ai comparé par rapport a d'autre 7eme semaine je pense être bon, aussi je vais changer d'engrais après cette cult pour GHE pas la jolie bouteille biobizz qui m'a avait été recommandé par culture indoor 11

Grow diaries is cool but it kinda sucks.

What another great week it’s been , today is Day 39 from seed an the lil ladies have jumped into preflower 😍! Yesterday gave em the trim up of the unders , kinda popsicled you can say to each one, cause we want to focus on them colas ! This week we should see some more great progress, let them caps start stacking ! Can’t wait to see what we do next week ! Hope you all enjoy an have an amazing productive day! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨💨🤙🏻

I flushed my monster plant we are starting late flowering so i wanna make sure that there is no nutrient build up. And to make sure that shes gonna end up like a Bomb. Smell is good but not too strong. So the plant is perfect i have nothing to say

Hi there! Thank you for checking out my Gorilla Glue Auto grow. The grow well other than around week 6 where I over did the feedings. She got a little burned but after some flushing I was able to get some of the excess water soluble nutrients out that was burning the plant. After the flushing she came back hard. She got solid and grew some fat buds coated with resin. Definitely a recommendable strain from Auto Seeds.

Smooth week - final harvest. Plant 5 was a surprisingly quick trim :)

I've already smoked some of this sweet one😘

These are clones that I managed to take from my summer garden that became a disaster due to a heat wave that we had breaking 100 year records. I expect everything to be 48” in height at maturity.

Hey guys :-) The lady has developed very nicely this week 👍. Since there will be space in the flowering tent for the next 10 days and it will then be switched over, I will no longer use any training. I'm looking forward to when the bloom starts :-) Otherwise everything was cleaned and checked. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Greenhouse seeds Company Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Week starting 4/10/2019 Spotted a few aphids today on some of the yellowing leaves - confirmed with the magnifying glass. Humidity continues to be an issue as I cannot seem to lower it below 60% at best, averaging 65%. The extraction currently is pulling the air from the tent into the room - will need to look into taking it outside of the house before looking at dehumidifiers. White powdery mildew is more prevalent on some of the tops. Manually wiping them off with a wet cloth each day. 05/10 - Applied nematodes today to all 4 pots (https://www.biogroei.fr/stenema). Had to apply it with water at pH6.5 08/10 - Watered all 4 plants to keep the soil moist for the nematodes. #1 08/10 - Watered at pH6.3 at 17 deg 10/10 - Feed of Vega at pH6.4 at 19.8 deg, EC 1.84 - still seems stunted during flowering and behind the others of same strain by a week or two. #2 08/10 - Watered at pH6.3 at 17 deg 10/10 - Feed of Vega at pH6.4 at 19.8 deg, EC 1.84 (pot was not dry yet, should have waited another day or two with feeding) - colas are still developing nicely whilst continuing with the leaf loss. - defoliated and cut all small branches with flowers at the bottom. #3 08/10 - Watered at pH6.3 at 17 deg 10/10 - Feed of Vega at pH6.4 at 19.8 deg, EC 1.84 (pot was not dry yet, should have waited another day or two with feeding) - a few curled/twisted leaves. Continues to need the most frequent watering - most probably due to the limited 7L pot. #4 08/10 - Watered at pH6.3 at 17 deg - is not drinking a lot of water compared to the other 3 G13 Haze strains. - getting close to harvest time, still not showing big signs of nutrient deficiencies or other issues. Some purple leaves at the very top of the main cola.

Esta semana fue muy productiva hicimos poda apical y de bajos ,trasplantamos a una maceta de 3 litros, se recupero muy bien y sigue creciendo hermosa , esta semana la vamos a dejar descansar y darle cariño para que siga creciendo sana , las semanas siguientes ya la vamos a ir entrenando con cropping y amarres vamos a ir viendo!!!

Week 5

Removed nearly all big fan leafs to get maximum of light penetration to the lower buds and more airflow to prevent mold. Should have weared gloves because it was a sticky mess :D getting more and more smell. I think i will start filling up the bucket only with clear water for one or two more weeks to flush. Think its harvest time soon. Eventually i will swap the whole solution to clear water coming week. ——————— Nahezu alle großen Blätter entfernt, um den unteren buds so viel Licht wie möglich zu geben. Hätte Handschuhe tragen sollen war auf jeden Fall ne klebrige Sauerei :D Stinkt jetzt langsam auch ordentlich die Pflanze. Denke ich werde die nächsten Wochen nur noch mit klarem Wasser ohne Nährstoffe auffüllen um ein bisschen zu spülen. Denke in ein bis zwei Wochen kann geerntet werden. Eventuell tausche ich auch die ganze Nährlösung gegen klares Wasser aus im Laufe der Woche.

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.