Recommended
Likes
Comments
Share
The funky one has the biggest new growths coming out of the nodes this is week 6 some ph damage from acccaidental un Ph neem mix that I use I forgot to ph but that was about right after the begging of week 5 doing good now looking less ph burned and the new growths are getting big . Garlic fusion on the left of setup
Likes
25
Share
COMMENTED BY MadeInGermany MadeInGermany 8 minutes ago Flowering day 19 since the time change to 12/12. Hey all together 😀. This week she has developed beautifully ☺️. I poured it 3 times with 1.2 l this week. Tomorrow I will add the 2 g GHSC Powder Feeding Bio Bloom because the first blossoms are coming :-). I checked all the leaves thoroughly for pests or diseases and everything is fine ☺️. Next week I'll look at your roots as soon as the coconut is completely rooted. As every week, the tent was cleaned and the entire technology checked. The humidifier was also refilled every day 👍. In the next few days I will remove the bottom shoots so that the energy doesn't end up being wasted in the small popcorn buds. I wish you a lot of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at : www.Zamnesia.com Type: Purple Punch ☝️🏼 Genetics: Granddaddy Purple x Larry OG 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
43
Share
@Roberts
Follow
Bruce Banner #3 is doing good under the Hortibloom Solux 350. I did have to HST her due to she is getting too close to the light, and the heat from it. Everything is looking good at the moment. Nice and healthy. I do need to do a air stone change very soon. That is about all that is happening. Thank you Hortibloom, and The Orginal Sensibile Seeds Company. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
7
Share
Weather has been solid so far. Lots of sunny days ranging from 75-85 degrees, keeping things smooth. Really enjoying this grow and looking forward to the coming weeks.
Likes
6
Share
Die Blue Dream erreich so langsam auch ihr Maximum, eine unfassbar große Pflanze mit einer schönen tief blauen violetten Einfärbung! 💙 Das Aroma ist auch sehr Komplex, eher Erdig, Gasy mit einem Einschlag von Waldbeeren. In einer Woche ca. wird geerntet.
Likes
7
Share
@NO_DRAMA
Follow
Week start very good. I already transfer Brain destroyer in to the big pot 💪 I will transfer Soul Drain tomorrow 💪💚 27.03 I make topping)
Likes
26
Share
SORRY TO EVERYONE WHO TRIES TALKING TO ME....I STILL CANT TALK TO ANYONE BECAUSE I TRIED CHANGING MY EMAIL ON HERE AND IT MESSED EVERYTHING UP. I CANT LIKE ANYTHING OR COMMENT ON ANYTHING. THE WORST IS I CANT JOIN CONTESTS😪😢😭 FINALLY STARTING ANOTHER GROW. MY BACK HAS BEEN FUCKED FOR MONTHS. CANT WAIT!!!! IM DOING 24 AUTOFLOWERS FOR THIS GROW AND IN 5 WEEKS IM STARTING ABOUT 20 FEMINISED PHOTOPERIODS IN MY 5X5 WITH A TSW2000 SO THEY CAN BE READY TO MOVE INTO THE 8X8 TENT AFTER THE AUTOFLOWERS ARE FINISHED. HOPE MY TIMING IS GOOD🤞🤞🤞🤞 LOL
Likes
16
Share
This week is another wet week with 72% humidity!! I am watching really closely for bud rot. And, I tend to get nervous and take a plant down too early when it rains so much. I can't really feed them any nutrients either because of all the rain. The good thing, however, is my skunk of doing really well considering the hail storm and broken stem it has had to endure. Miss Skunk has been brave and withstood the test of time. She has long, thin stems but she is packed with small buds and lots of resin! Royal Queen Seeds says, "Sweet Skunk Auto seeds produce plants that grow to a very manageable height of around 60–100cm, which translate to 40 inches. My Skunk is currently 36 inches!! Sweet Skunk Auto seeds are ready to harvest just 11–12 weeks after sprouting." So, I should be ready to take this down pretty soon.
Likes
18
Share
@Sti_Cazz
Follow
So this week the plants streched like crazy, the NL started to flower too and has actually become taller then the other 2 plants, even though its technically 2 weeks behind. the strange thing is its way more spacious then the packed Diesel.... it'll be fun seeing how they match up in the end! My new fan and dehumidifier solved the RH issue I had and I crushed it down to under 50% now! Things are looking like they're on the right track.....fingers crossed! I wonder if there is anything else I can add , nutrient wise... i know I shouldn't overdo it but I'll play around a bit and see. Got rid of most bigger and medium fan leaves that i felt were blocking the bud-sites from getting light...again, not sure about if I'm going about this the right way, seems counter-intuitive to get rid of so much green but hey ...it helps greatly with lowering humidity and keeps the bottom of the girls nice and ventilated. I actually took off a bit more because it keeps growing shut. Update: got some big bud and overdrive from my local grow shop... I'll give it a try...
Likes
19
Share
Don’t judge. A few days away from chop! Again... looking forward to see how the “stress” improves quality...? Photos/video taken 133 days after breaking soil, day 56 of flower. UPDATE: Plant harvested on 1/7; day 136 after breaking soil, day 59 of flower.
Likes
10
Share
Likes
14
Share
@dekss
Follow
*LOS FERTILIZANTES SON HACIA LAS OTRAS PLANTAS NO TERMINADAS NO LA QUE SE CORTO ESA SOLO AGUA* *reemplazo bio bloom por monster bloom como los dos son PK la planta se sobrefertiliza* semana 10 y se va de corte la primera contento de terminar mi primer diario entero en esta plataforma cogollos llenos de resina muy contento con la producción en 68 días desde germinación *la planta en total creo un poco menos que el doble de lo que se corto pero fui sacándoselo de a poco antes* ahora solo queda esperar secar y las otras que vienen en camino 70.85 gramos en humedo contando tallos y una hoja de viento por rama espero marcar unos 15 en solo cogollos y ya secos LST en las dos ramas principales de una de las que viene siguiente muy compacta en lo personal me gustan los cogollos con casi nada de hoja (de esto dependerá cuanto raspe en la garganta) por lo que el humo entra sin dejar ninguna molestia muy suave y sativo
Likes
19
Share
@nerdz
Follow
The strains I'm here for. Wish I could have left that back left roast a few more days but it would have probably put the other 3 plants past the sweet spot. Dense regardless. The second apex in the back right was very pretty and colorful. Fruity smells coming off them. From the 4 plants I'll estimate 700-750g dried.
Processing
Likes
9
Share
She's looking very healthy, beautiful color on the leafs, completely stunning after I got rid of the fungus gnats she's growing ultra fast, let's see what happens with this beautiful princess of mine! 😍👀💚
Likes
28
Share
Que hay familia, vamos con la segunda semana de crecimiento de estas Apple Fritter de Zamnesia. La temperatura está entre los 21/24 grados, la humedad está entorno al 60%, y el ph lo mantengo ahora al principio en 6.2, el foco por supuesto está enchufado 18 horas , tener tienen que crecer fuertes. Y aparte añadimos nutrientes de Agrobeta, que no puede faltar semejante gama. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo, buenos humos 💨💨💨.
Likes
76
Share
@Natrona
Follow
Special thanks to @DreamIT for showing me how to add music and animation to video. Check out my fountain video above for a short clip. Thanks to @UnorthadoxDude for influencing me ( by visual curiosity) maybe twisted an arm to buy some carnivors. Well I happened to find some at our annual master gardener plant sale. I will be putting some in the tent. Lots of growth in my carnivores. Flowers on Sundew.
Likes
114
Share
@Natrona
Follow
RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea
Likes
13
Share
@ILSW_05
Follow
the sweet skunks are doing well they’ve responded well to the toppings & the clones are rolling strong as well 💪🏼 hoping to get a lot more of these babies going happy growing friends 🤙🏼