Likes
Comments
Share
This is my very first indoor grow. I decided to gro six autos from fast buds. Paper towel for 24 hours till I saw a tap root went straight to growing medium. I’m doing this first run with pre amend fox farm. One of each plant I’m ocean Forrest and one of each in coco loco. All pots have center of seed starter to prevent burning my seedling. I’m 3 days since I put the seeds in the paper towel and the seedlings are just now starting to break through the soil.
Likes
31
Share
2024-05-15 No big thing to report, The Planties doing well, established in the new Pot- I placed them in the youngsters room, so they will get stronger light, and gettting more solid structure. BREEDER INFO Tangerine Snow F1 Fast Feminised is a 75% sativa, four-way cross of (Boost x Tangelo) with (Lavender x Power Plant). This Fast F1 hybrid is bred from Cali genetics and boasts great citrus terps, high resin production for extracts, high levels of THC, very good yields and excellent mould resistance. Tangerine Snow F1 Fast can be grown indoors as well as outdoors. Indoor flowering times are between 8 - 10 weeks while harvest time in northern latitudes is during September while in the southern hemisphere growers will be harvesting during March. Recommended climate regions are hot, dry, humid and warm. These are tall, semi-branched plants that grow in excess of 200cm and display a high degree of vigour with very good uniformity. In common with many other heavily sativa-dominant strains, Tangerine Snow F1 Fast offers excellent resistance to mould as well as to plant pests and diseases. The combination of citrus terps and plenty of resin makes thi a very good extract strain with the 'washing' method delivering very good yields of hash. The citrus terpene profile is reminiscent of mandarins and tangerines and also has sweet candy notes. THC production has been lab-verified at a strong 24% while CBD is low. The effect is uplifting and energising, perfect for use during the day and early evening.
Likes
26
Share
This thing was very easy to grow. Liked low PPMs in flower. Around 600 was plenty for her. Will report taste and effects when curing is complete.
Likes
2
Share
Fantastic variety I was very impressed with the trunger of the pistils that has produced this wonderful variety, from photos you can notice a violet traits, while the other no, has a very intense aroma has a aftertaste of chocolate and coffee notes, predominantly savialy, for the day, has a good structure with interior away from each other.
Likes
21
Share
@NSABND
Follow
Start of week 7 Day 51 was the hottest Day ever 😫
Processing
Likes
13
Share
@GrowGuy97
Follow
1 of the bubba kush & 2 of the gorilla zkittlez are a little behind but over all everything seems to be going good so far! Day 10 update transplanted all the ones in smaller pots to 5 gallon pots except 1 of the bubba Kush it still needs a few more days! Everything else seems to be going great!
Likes
7
Share
Another easy week, weather has been beautiful! Lot’s of ☀️. They have been very thirsty as a result, I was able to get three waterings in this week. Just keep bringing them in and out of their pop up greenhouse daily. Started to taper down some of the feeds, two plain oh waterings and one feed this week. I don’t really “flush” but I do taper down to just ph water for the last few feeds. Happy growing folks! 🇨🇦❤️🌱😎💨
Likes
10
Share
This plant is starting to smell like rotten eggs. Weird.
Likes
4
Share
@RoyColt
Follow
Day50 26/05 Changed new reservoir 8L total 2,20 ms.Continue Def. and Lst. Day51 27/05 add 2L ro water with 4ml cal mag. Continue Def. and Lst. Day52 28/05 add 2L (1L only ro water and 1L with nutrients.). Continue Def. and Lst. Day53 29/05 add 1L only ro water. Day54 30/05 add 2L ro water with nutrients.. Continue Def. and Lst. Day55 31/05 add 2L ro water with 4ml cal mag.
Likes
1
Share
She got really stout and bushy like a Christmas tree, you can tell by the stem structure that the colas are gonna be thick and dense, but boy did she have a Crazy couple of weeks. First it was little spots of powder mildew. Then She kept getting spider mites and i couldnt seem to keep them away. i have a lot of other plants and veggies growing my garden so i moved her. Little did i know that her being near my sunflowers meant that some type of sunflower worm would get to it and one burrowed inside the stem of the main cola so i had to trim that way down to keep it from rotting. The mold and the mites were friggin persistent so i moved her to a different location and shes doing so much better. im almost positive i stunted her by trimming the main cola. Im not mad though cause it looks like she has 4 different colas growing in its place so im ok with that. Most descriptions say she finishes flowering around 10-11 weeks and I'm there now with a lot of maturing left to do. Shes looking healthy so well see how she matures!
Likes
7
Share
Likes
11
Share
@johdlong
Follow
Hoping to see lots of bud densing this coming week. The smell of the terps this morning was crazy. A bit over 3 more weeks, I can't wait. Day 44 update: Leaf yellowing has definitely been slowed, and senescence of lower yellowed leaves has also seemed to stop. Some leaves that continue to be of concern are particularly those accumulating anthocyanins, likely due to my low night time temps. I think they are doing very well, with some very minor problems. This cycle is in the winter for me, so the humidity and temps has been low, but I am happy to not have had to deal with pests or mold like in previous cycles. Day 45 update: broke out the loop today to inspect the trichs, still looking very immature, as expected given there is still a few weeks left until the planned harvest date. Today I watered in a 1/4dose of Buildabloom, some quillaja, pineapple fpj, and some rootwise enzyme elixer.
Likes
8
Share
@Kirsten
Follow
26.12.24: These are my 2 best plants P1 and P2 Purple Punch, they are looking great! Not sure what happened to P3. They are in early flower/ pre-flower with the pistils clearly seen on P2. I am also hoping to tie some of the branches down to help light penetration on the lower canopies. I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Likes
19
Share
@GeOMaTTiC
Follow
Diary Legend: 💧- Watered 🌱- Seedling 🌲- Cut Down 🍃- Defoliation ✂️- Topping or FIM'ING 🚂- Training (LST) Wk7 10/20/21: Day 43. 💧Plant is looking much better overall. Leaves are getting the green back slowly, not that it matters much at this point. Buds are getting very fat and crystaly, and the smell is getting more intense each day. If the buds keep growing, I can see this yielding a bit more than originally anticipated on Day 34 10/22/21: Day 45. Not entirely sure what is going on, the plant seems to want to go yellow still. The buds still look good, so I'm not sure if they are just sucking out the nitrogen. Buds are fattening up at a fantastic speed. Everyday I see them a little bit fuller, and more covered in trichomes. Several hairs are starting to turn red, which doesn't mean a whole lot just yet. I am anticipating at least another two to three weeks before it's ready for harvest, but it might be sooner. I'm not in a rush, as it will still be curing a while before smoking. 10/24/21: Day 47. 💧The smell is incredible, becoming more potent each day. It's now noticeable right away after opening the tent, and not just when buds are rustled. I can see the buds slowly getting darker. Not extremely dark, at least not yet. It looks as if it will be a beautiful looking bud once it's all finished. Watering is becoming an everyday thing, so I will go back to the juice container of water. 10/26/21: Day 49. 🍃Removed a few more leaves, mostly the dying ones, and a few more to open up light to lower buds. The amount of yellowing is still confusing me, as it should have at least subsided by now. A good test of the genetics, as it's still going strong. The next run will be a much more controlled run, with proper nutrient dosage at the right time. I'm amazed at how fast the hairs are dying back, what once contained a few red hairs, now has a nice covering. Still plenty to go, since I won't be harvesting this one early. Two more weeks minimum, unless issues arise.
Likes
5
Share
10.04.2026 The BuKu is doing fine. She is growing well and getting taller and taller every day. Had to put her in flowering mode because of my SuperLemonHazexPink Candy which is growing explosive. I am very sure the plant was in a beginning Ph induced calmag-issue stage. Had no symptoms yet but i guess one or two weeks later...So I decided to react. I changed my water to rainwater and added Athena CaMg, about 1ml per liter, and I gave her a foliage feeding with about 1 ml CaMg on 4 liters of water once. I turned the ventilation down to raise the temperature and room humidity. And I lowered the lights energy on some days. But now the lights are running in full mode again Gave her Hesi Bio Bloom 2ml/l twice and added some Hesi PK 13/14 for the kick. My rainwater has an EC of 0, I add CaMg to an Ec of 0.3 . Then I add PK 13/14 to reach an EC of 0.9 Bend her some times and constantly defoliated her huge leaves. No spidermite problems yet and I think the fungus gnarfs are getting fewer. everything good so far. Added the far red in my lamp today.
Likes
9
Share
@NanoLeaf
Follow
Week 3 - Transplant to fabric pots Transplanted the ladies in to 17L fabric pots. Used GHF BioGrow and BioBloom in a 2:1 ratio 1g per L to unamended coco-perlite (70/30) mix with extra worm castings. Turned the wattage up on my ballasts to 400W each. The ladies have finally settled in their final pots and the are happy in their new environment. I also performed LST by tucking fan leaves and softly pinching and bending some of the bud sites.
Likes
51
Share
@Waveform
Follow
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …