1
Comments
Share
@Djuff
Follow
Week 3 Flower: I started with 10ml/500ml of BioTabs Bud Booster once a week. I put another Trellis on top and continued to bend the stems. Some Buds starting to form :). It doesnt smell yet, only if u touch it. Then its quite sticky and stinky (in a good way). Still stretching a bit, but it didnt stretch as much as i thought it would (and as people told me). Week 3 Day 4: Very moist weather outside, the tent is in the sleeping room, average humidity inside the tent is 58% atm. A bit too high. Outside tent ~70% - way too high, hope its getting dryer soon. Week 3 Day 5: Conditions normalizing. average humidity now around 45%. Week 3 Day 6: Im wondering how low I should start cutting the smaller, lower Popcornbuds, any ideas? - Removed some Popcorn buds/leaves from the lower parts of the plant.
3
25
Share
@Jimmy89
Follow
Day 9 of flower, very overcrowded in this 4x8! All the plants will be coming out in the next day or two for a severe defoliation. Looking forward to seeing how this cultivar performs, seen good results from a friend of mine
Likes
17
Share
Que hay familia,actualizo la primera semana de crecimiento de estas Runtz F1 automรกticas de Zamnesia. Vemos que las 5 estรกn en perfectas condiciones, tienen un buen color y salieron sin ningรบn problema aparente. Empiezo por supuesto abonando una pequeรฑa cantidad de la gama Agrobeta. La temperatura estรก un pelรญn alta 26 grados y la humedad anda entorno al 55%. Riego cada 48 horas y suelo pulverizar con agua para aumentar un poco la humedad ambiental. Hasta aquรญ es todo estas prรณximas semanas veremos cรณmo van avanzando. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Os comento que tengo un descuento y para que comprรฉis en la web de Zamnesia de un 20%, el cรณdigo es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Hasta aquรญ es todo, buenos humos ๐Ÿ’จ๐Ÿ’จ๐Ÿ’จ.
3
15
Share
@PiusWaxis
Follow
As I approach the tenth week of flowering, my plant's progress continues to amaze me with each passing day. The meticulous care and attention given to using Plagron's premium nutrients has certainly paid off, as the plant continues to thrive and display robust growth.๐Ÿ’ช๐Ÿš€ The buds have now reached an impressive size and density, with a glistening layer of resin that speaks volumes about the health and vitality of the plant. It is truly a sight to behold and a testament to the benefits of using high-quality nutrients in the growing process. The TrollMaster "TENT-X" environmental control system remains an essential part of my setup, ensuring the grow room maintains optimal temperature and humidity levels for the plants. The precision control provided by this system continues to be a key factor in creating the ideal environment for plants to thrive.๐Ÿ˜Ž๐Ÿ’ช The 240W MEDIC GROW MINI-SUN 2 LED light continues to provide exceptional lighting conditions, giving plants the perfect spectrum for their growing needs. Monitoring temperature, humidity and VPD data through the control system graphs allows for precise adjustments to further optimize growing conditions.๐Ÿ˜ I'm excited to share a video showing temperature, humidity, and VPD trends throughout this week, highlighting how these technologies work harmoniously to create the perfect environment for plant growth. It's amazing to see how these tools come together to help plants reach their full potential. With each passing week, I am filled with excitement about the new developments and challenges that await me in the grow room. With the solid foundation provided by Plagron nutrients, the reliable support of the TrollMaster control system and the exceptional lighting of MEDIC GROW LED, I am confident that the next week will bring even more progress and success in my growing journey. Thanks for taking part in this exhilarating adventure of growing and exploring plants! ๐Ÿ’ช๐Ÿ‘ฝ๐Ÿš€
2
10
Share
@rickytpb
Follow
Hey everyone, I have a sour ripper plant in my 40x40 cm grow tent, and I've shared my light setup above. I need your opinions on whether I should transition her into the flowering stage or wait a bit longer. I think I may have trimmed the main stem too much to the side, and I'm a bit worried about it, honestly. This is my first grow, and I've made some mistakes along the way. Should I perform more low-stress training (LST) to the opposite side of where I trimmed the main stem? I've also removed four big leaves from the bottom that were covering a significant amount of light to the lower branches, and I've just performed four toppings. I need your opinions , happy growing all!
2
15
Share
@PiusWaxis
Follow
Here I am again with an exciting update on my amazing plant's growth during this crucial week of flowering!๐Ÿ’ช๐Ÿ‘ฝ The plant continues to thrive thanks to Plagron's exceptional nutrient line, displaying healthy buds and robust growth that continues to amaze me week after week. In fact, in just seven days, it is incredible to notice how the buds have grown in volume and the resin has increased. The TrollMaster "TENT-X" environmental control system once again proves to be fundamental in my setup, allowing me to maintain optimal temperature and humidity levels for the plants. This stability is critical to growing success and plant health. ๐Ÿ’ช๐Ÿš€๐Ÿ˜Ž The MEDIC GROW MINI-SUN 2 240W LED light continues to provide perfect light conditions for my plants, ensuring they were receiving the right amount of light for maximum growth potential. Viewing detailed temperature, humidity and VPD graphs gives me valuable information about the growing environment, allowing me to optimize conditions and create the best environment for plants to thrive. I shared a video showing the live graph of temperature, humidity and VPD of the entire week of growth, demonstrating the effectiveness of these technologies in ensuring an optimal growing environment for plants. As I enter my eighth week of flowering, I'm excited about the new obstacles and discoveries that await me in my grow room. With the support of Plagron nutrients and the precise control system offered by TrollMaster, I am confident that I will achieve exceptional harvest quality. I appreciate your continued support on this journey of growth and exploration. I continue to prepare for another successful week in the world of plant breeding! ๐Ÿ’ช๐Ÿ‘ฝ๐Ÿš€
4
12
Share
Likes
16
Share
Week 2 and the training has already started. I was inspired by Canamatoes, this is his LST method. Day 17 - when LST turned into HST aka FIS technique (fuck I snapped). So it started as a really harmless routine, I wanted to tie down the plant when at the weak point where the previous tie down was (1st nod) the main stem just snapped ๐Ÿ˜ฌ First I tried to use some duct tape and it did not holding the plant together. I grabbed the super glue and it seems like it does the job. โš•๏ธ When I got home in the evening two fan leaves were wilted. Will she survive? Let's say she will survive, I am sure due to stress the harvest day will be delayed and it won't be a massive yield. Day 19 - I decided to go ahead with a VEEERY GENTLE LST. We don't have the luxury to wait for the full recovery.
Likes
62
Share
Hey guys and welcome to start of Week 8! ๐ŸŒป Today is day 21 of flower so i went ahead and cut most of the plats Fanleaves off. It took a while but now the Airmovement is improved and the humidity should also be lower. I also hope I didnโ€˜t stress them too much. From now on they will be reseaving less and less Nitrogen going forward. I hope the colours come through as well ๐Ÿคž๐Ÿป Thanks for following along and I will keep updating the progress. Happy growing ๐Ÿ€