The Grow Awards 2026 🏆
Likes
Comments
Share
- Humidity was low beginning of the week and the temperature was quite high. But, I still managed to hit the ideal values. Towards the end of the week, the average humidity in my city was at the high 70s which reflected into the tent. - VPD fluctuated this week between 1,0 and 1.65 kPa, averaging at 1,42 kPa. - Tent temperature fluctuated around 24 at night and 28 Celsius at day time, averaging at 25.5. - Humidity did not fluctuate as it used to beginning of the week but it spiked crazy towards the end, averaging at 56.4 which is much better than the last week. - I am now giving standard 6.4 Ph Water. - Frosting slowed down but the flowers are getting bigger. - Stickiness and smell keep getting stronger.
Processing
Likes
3
Share
So far so good... flowering really nice... starting to smell really good... feeding her modestly and going to keep it that way... Fingers crossed 🙏
Processing
Likes
5
Share
Likes
2
Share
Set up an evaporative cooler to act as an intake and to cool the temp through evaporation. It I was able to get the average temperature down to an average of 77°. Relative Humidity increased to an average of 55%. ~~~~~~~~~~~~~~~~~~~~~~ Evaporative Cooler: The evaporative cooler was way bigger than I thought and blowing all the air into the tent would be overkill and would throw off my ventilation given that I only have a 4inch exhaust fan blowing air out. So I had to rig an air duct onto the front to channel some, but not all, of the air coming from the evaporative cooler. I cut a hole in a plastic brownie box and zip tied right angle plate that I had leftover from an ikea furniture. Then I put velcro tape to easily attach and remove the air duct from the cooler for future maintentance and cleaning. I left the room where my tent is closed one day and the humidity went up to 84% which also increased the temperature to 90° but I found that simply leaving the room door open gives the cooler enough air circulation in order to function properly and averaged out at 55% RH and 77° F. ~~~~~~~~~~~~~~~~~~~~~~ Defoliated some ugly fan leaves that were shading a lot of lower buds.
Likes
11
Share
@Bud_vista
Follow
Week 7 began! She’s gaining in bud size and smalls already crazy good. Until now I’m really happy with the genetic. She’s doing great and never had the feeling that she couldn’t take the stress. I mean the pod is only 5liters(1.3gallons) large and the conditions are not the best. Great genetic so far.
Likes
170
Share
Yo yo yo! Day 8 The start of week 2 growth seems ok. Although as always I’m very impatient at this point. Watered with plain water today. Let’s see what this week holds for us. Below is a link to RQS if you would like to have a look at there selection. ✌️ Day 10, added a little heater into the mix as night time temps were dropping, seems to have done the job. Plodding along. ✌️ Day 11, gone to 18/6 DLI 34 watered with plain water tonight. Day 14, not a lot to report. Girls are doing ok. Some good growth this week. Watered last night. ✌️ ⭐️⭐️⭐️https://www.royalqueenseeds.com/uk/autoflowering-cannabis-seeds/633-wedding-cake-automatic.html⭐️⭐️⭐️
Likes
20
Share
Likes
9
Share
All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
2
Share
@Bluemels
Follow
Tag 33: Aus irgendeinem Grund wächst die Green Gelato extrem ungleichmäßig. Was das scroggen sehr schwer macht beziehungsweise das Netz gleichmäßig zu füllen . Hach ja könnte noch eng werden.
Likes
58
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 51 since time change since 12/12 h. Hey guys :-) . The buds keep getting bigger and smelling better and better. Since she will be ready in the next 12-16 days, she received Clean Fruits for the first time today (see table above). It was poured twice this week and the tent was cleaned. Stay healthy 🙏🏻 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : www.Zamnesia.com Type: Banana ☝️🏼 Genetics: OG Kush x unkown 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4
Likes
9
Share
@Rizik86
Follow
Day 10 - 2 inches tall seedling. 3rd set of leaves. 4th set emerging from center. PPM 268 2 mL CalMag 4 mL Micro Grow Bloom B52 Voodoo Tarantula Piranha Rhino Skin Sensizym and Bud Candy. Day 12 - Checked PPM 255. First visible roots sticking out from netpot. Plant is green and happy. Added 2 mL CalMag PPM 300. Day 14 - Checked PPM 268. Raised bucket and plant. Light is 26 inches from top of plant. Adjusted light duration to 20 hours on and 4 hours off. Half a dozen roots sticking out from bottom of netpot. 3rd set of leaves have 5 fingers. I believe this means its no longer a seedling. Now entering VEG.
Likes
21
Share
🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Processing
Likes
29
Share
Humidity has been the biggest struggle. The dehumidifier I bought was complete useless only moved RH 1% down. Tried a couple different things to try to combat the excessively high RH (75+%) openings up extra flaps in the tent didn’t work so I decided to turn on my carbon Filter fan. Which seems to be maintaining it at 55%, however prior to me being able to start my fan I had to clear the water out of my exhaust ducting. It had accumulated at least 1/4 gal of water, this to me was a clear indication of my humidity problem. Another thing I want to rant about is PH pens I haven’t been able to find a pen worth a damn and yes I have been properly handling them. My first one died on a watering day and I didn’t have a back up so I ordered two more off amazon which don’t seem to be working well either. I ended up doing it the old school way with the drops and shaking it in a tester. Oh I also gave nutrition a break past two feedings I had a slight burn on the tips will probably do one more plain water then put her back on nutrition. Went back to nutrition early then I intend due to a slight nitrogen deficiency I don’t thing it’s gonna be a big issue just gonna continue to monitor.
Likes
3
Share
@NyBushDr
Follow
Good morning, we just completed week 4 of veg and today is day 29 which is the start of 5. Temps are steady and these girls like it a little cooler and more humid, I tried to increase kpa to 1 slowly from .9 and they were not happy at all so I’m just keeping it at .9 for now! They also are thirsty girls wanting water every 2 days drying the pots up quickly! They got a dose of recharge which I like to do every 3 weeks! Also starts silica now that I started training the branches down for a better even canopy ! Moving forward I will alternate fish shit one watering and silica the next the rest of the way! I’ll be transplanting to their final 10 gallon pots today or tomorrow then will do some more training once they recover from that! I don’t usually notice transplant shock so I’m not anticipating any issues! Thanks for reading and see ya next week
Likes
9
Share
Bus starting to get bigger some leaves are a yeallowing …not sure whats wrong but seems fine. 23.4. 1,5 L with feed 27.4. 1,5 L w/f + 2 L with calmag
Likes
4
Share
Bumped up my feed over this week which stopped my leaves from severely eating itself. Was definitely underfeeding in cal-mag and P/K which was a beginner mistake. Plan to get separated nutes for a better feed that’s not all mixed. Buds are forming nicely tho! We’ve got good dense nugs forming and a lot of orange hairs popping! The smell profile…. amazing not strong yet but the smell is like fresh green lemony pine with that hint of funk we all love. Very excited to see the finish come these last few weeks!
Likes
10
Share
@greennug
Follow
happy with plants at this stage. cant wait to see them bulk up. they are starting to smell a little now the sour lemon tart is alot more pungent than critical orange punch at this stage.
Likes
13
Share
@MotasKush
Follow
50th day of flowering behind us Purple Punch X Do-si-dos # 1 and # 2 ripen trichomes are milky, at the end of 8 weeks they will go under the scythe. Zombie Kush has a moment too, it looks unbelievable, the resin is fluffy and the velvet splendor. And bananas hopefully they will be good .. We are looking forward to the harvest! Thanks a lot to everyone who likes the diary, let it grow! Thanks!
Likes
7
Share
had to flip because of the critical already started flowering somehow