N deficiency but it’s ok

Hello my friends and all those who follow my progress. It is time to update the diary of the mother plant Bubblelicious. This plant is already 4 weeks old. I started to prepare it for cloning, I cut the lower vegetative leaves and washed it with clean water. The plant develops normally, but there is little room for roots. I'm going to make a third level pot, the biggest, but later when after I do the harvest of the Neville Haze Auto. I haven't decided yet how and how many clones to grow, so I'm not disturbing the mother plant.

Day 22- Second defoliation into flower.

5ta semana 12/12 #greengelato by RQS. Alimentada con Quemanta nutrientes bajo un spectrumboard de 75w de los chicos de heaven Grow ligths.

🗓️ WEEK 8 (flo) - HARVEST WEEK (56° FLO) 💧 Midway through this final week of flowering, I performed a complete DWC reservoir change. I replaced the nutrient solution with plain tap water, EC 0.4 - pH 5.8. This flushing solution was maintained for 4 days, right up until the moment of harvest. 🌱 On the 56° day of flowering (day 84 from the dry seed), the plant appeared perfectly ready for harvest. The buds are dense and glistening with resin, nearly all pistils have browned and retracted, and the trichomes show a beautiful mix of milky and enough amber. Immediately after chopping her down, I removed all the large fan leaves and I've decided to dry these too as they are remarkably full of resin. ✅ DRYING PHASE The entire plant was hung to dry inside the grow box, which was kept completely dark with constant, gentle air circulation for 8 days. The average VPD during this period was maintained around 1.2 (approximately 20°C and 50% RH). Once this drying period was complete, I trimmed off all the sugar leaves. These resinous sugar leaves will be combined with the already dried fan leaves and larf buds, and I plan to use them to make cannabutter for edibles. ⚖️ DRY WEIGHT After the 8-day drying period, and once all the remaining small leaves and branches were removed from the buds, I weighed the final product: The harvest yielded: - 150 grams of dense buds. - 5 grams of finger hash collected during handling. For edibles: - 30 grams of larf. - A large amount of fan and sugar leaves. ⚠️ In the next coming days I'll update the harvest week with info about curing stage and a smoke review.

Como es un cultivo s.o.g hice el transplante rápidamente el día 12, para dejar crear raices ya que se pasará a floración tempranamente por el día 20 a 25 de vegetación, se transplanto de 1 a 5 lts. El día 14 se hará 1° riego con fertilizante y el día 15 ya se hará riego foliar con estimulador de floración delta 9 para próximamente pasar a floración ✌️🍀💚

ladies are doing fabulous!! growing incredibly fast. loving the cob light. ww/bb you can literally watch grow every day. the white widow didn't like that I took a few fan leaves I took off, seemed to make her grow a tad slower. the ww/bb with the 3 axillary buds grew out perfect and the bottom node grew just right to get even, and make a nice flat canopy. same with the king tut. on crazy anomaly was one branch on the ww/bb has 5 auxiliary buds! never seen or heard that before. trying to decide If i should top there too. check out the video to see it better thanks for following any tips please lmk!!

Ab jetzt werde ich meine 3 hübsche WW spülen, ich hoffe das die letzten 2 Wochen Blüte noch ausreichen das die Buds noch an Größe gewinnen, die Trichom Bildung ist reichlich vorhanden, und der Duft lässt ein schon ungeduldig werden. Das ist mein erster grow mit White Widow automatic, und mein erster grow überhaupt mit automatics. Ich konnte einiges an Erfahrung bei diesem grow sammeln. Ich habe Fehler gemacht die ich beim nächsten mal zu verhindern weiß. Ich werde euch auf dem laufenden halten bis dann wünsche euch dicke Knospen.👍🏻

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 07/12/2019 - Fed her 2l of 6.5PH water with 0,5ml of each Grow, Bloom, Max and Alga-mic, and 1ml of each Heaven and Vera,noticed about 10% run off, also added a green filter to the camera lens. Adjusted the light distance to 55cm again it was toooo close about 32cm. 10/12/2019 - Decided to go back and check the basics, removed led strip to give a proper 'night' time, changing light cycle to 20/4h no more 'exotic' 22/2h, re-checked the light distance every 2 to 3 days to ensure 60-45cm and I can tell all ready she is loving it. Also added home made Co2 made with 1 tsp of yeast, 3/4 tsp of sugar 700ml of warm water in a 1l bottle with a tiny pin hole on the cap. 11/12/2019 - Fed her 1.5l of 6.5PH water with 0,5ml of each Grow, Bloom, Max and Alga-mic, and 1ml of each Heaven and Vera,noticed about 10% run off. 12/12/2019 - 8 weeks have passed and no flowers I guess I'm flipping to 1212h to see if she reacts.

This week the new growth of the plants transitioned from looking relatively healthy to droopy and yellowed. I wasn't sure what the issue was at first and thought it might be light stress. After more research, I determined that I had what looked very much like a zinc deficiency, which is almost always a symptom of over-watering, which is the most common mistake for new growers, i.e. "Me". I had assumed that adding a good amount of perlite to my soil and using smart pots would prevent me from running in to any drainage issues but I guess not. I was up to 1.5 liters per plant when I realized that it was too much. I also realized I was misreading my syringe which I use to mix nutrients, and that i had been giving only 1/10 of the liquid nutrients that I thought. I'm super embarrassed about the mistake but I'm going for full transparency here, so there it is. Course correction takes places after day 31.

Flush week

Ran an extra week on 2.3 ec squeeze out a bit more bud growth before adding resin finish and begin the 2 week flush

Hey, green warriors and cannabis connoisseurs! 🌱✨ We’re now into week 2 of the flowering stage in our Runtz Battle, and the excitement is building! Our plants are thriving, and the first signs of budding are beginning to show. Let’s dive into the progress and take a closer look at how these beauties are developing. Week 2 Flowering Progress 🌿🌟 As we move further into the flowering phase, here’s what’s been happening: • Bud Formation Begins 🌸: • The Runtz plants are now focusing their energy on flower production. Tiny buds are starting to form at the nodes, and you can already see the potential for a bountiful harvest. The plants are strong and healthy, with dense, vibrant foliage. • F1 Compactness Continues 🌟: • The F1 strain remains the most compact of the group, showcasing tight internodal spacing. This compact structure is ideal for maximizing yield and creating dense, resinous buds. Environmental and Nutrient Update 🌡️💧 We’re maintaining our focus on providing the optimal environment and nutrients to support strong flowering: • Watering and Nutrients 💧: • The Autopots are doing their job, keeping the plants consistently hydrated with a TDS of 400 and pH of 6.2. This balance is crucial for nutrient uptake and overall plant health as they develop their flowers. • We’re continuing with Regulator and CaMg Boost in the reservoir. The rich, living soil is supplying most of the nutrients, allowing the plants to flourish with minimal additional inputs. This organic approach is part of our test run to see just how effective the soil’s biolife and nutrient mix can be throughout the entire growth cycle. • Environmental Conditions 🌡️: • Temperature: Room temperature is stable at 30.3°C, with a cool water temp of 18°C, keeping the roots happy and healthy. • Humidity: With an RH of 51%, we’re in the perfect range to avoid mold and mildew while still encouraging robust bud growth. Lighting and Growth 🌟💡 Our lighting setup continues to play a crucial role in the plants’ development: • Lumatek Zeus 465 Compact Pro 💡: • The Lumatek Zeus is delivering intense, full-spectrum light, which is essential for strong bud development. The even light distribution is helping to ensure that all parts of the plants receive the energy they need to produce thick, resinous buds. • TrolMaster Hydro-X Controller 🌡️: • The TrolMaster system continues to manage the growing environment with precision, ensuring that the plants are kept within the ideal temperature, humidity, and light parameters. This control is vital as we move deeper into the flowering phase, where consistency is key to maximizing yield and quality. Looking Ahead 🌟🌿 As we head further into flowering, the excitement continues to build. The Runtz plants are thriving, showing early promise for a beautiful and bountiful harvest. With the environmental conditions and nutrient strategy finely tuned, we’re on track for a successful flowering period. Stay tuned for more updates as these buds continue to develop and the Runtz Battle heats up! Here’s to another week of growth, discovery, and green magic. 🌟💚 #RuntzBattle #Autopots #CannabisCommunity #FloweringPhase #PlantHealth #GreenMagic #NutrientStrategy #GrowStrong #StayPositive Germination method 🌱 @thecannakan Genetics Runtz F1 @zam.nesia Runtz auto @kannabiaglobal Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #RuntzBattle #KannabiaVsZamnesia #GreenJoy As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️ link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚

Unfortunately I spotted one bud with bud rot on my gelato plant. I flushed it on day 91 of cycle, day 54 of flowering. Today is day 94 and it seems it has not spread out to any other buds(happy days) .. I am watching it closely everyday and also to see how the trichomes are going.. breeder says 65-70 flowering days to be ready.. let’s see.. if I spot another bud rot I will probably harvest it.. I hope that will not happen.. let’s go

Jacky White is gonna treat me right! She's looking delicious and just packin on the buds. Trichromes are poppin up at a good rate and buds have almost stopped vertical growth...I think. I've seen strains start to appear to finish and then just start forming new calyx right on top. She's looking like a promising strain. She's starting to have a beauty fragrance that's kinda reminding me of a pine/kush/grapefruit aroma. I love opening this tent. Keep your stick on the ice and if she's nice take er twice.

Added some bamboo for support of some of the heavier bud laden stems, still addressing the tip burn, think its mostly due to under-watering, working on that balance, not too certain exactly how far I am from harvest, thinking maybe a month?