First 2 transplanted I’ll do the other 3 or 4 soon 6 for 6 Go Fast Buds!!! Strawberry Bannana for the win!!

So we have entered week 3 for these aptus fed girls and I think they had a slow start after transplant but soon perked up Allthough the growth of branches ere not as quick too develop as I would like but any comments are welcomed They are healthy just not as explosive with growth so hopefully over the next week they get comfy and take off 🤞 This is my first time using aptus so I expect myself too need too adapt. I am sure they will be fine, I also have 2 icc from Humboldt which have been late starters so I'll be potting those up this week and they'll join the older girls on the next update 🌱 I'll also be doing some slight lst with the untopped girls too provoke strength and hopefully push them too grow. Much love and stay blessed 💚

On day 1 I transplanted 2 BB clones into 3 gal smart pots with coco coir. I watered them in with veg formula and set up my blumat watering system with week 1 flower nutes. I raised PPFD to 600-700. On day 2 the reservoirs PH was adjusted from 6.4 to 6.0. The rez is 823 ppm. The tops are 16.5" from the grow light. The blumats have not started watering yet and I will monitor to ensure it goes smoothly. I have the blumats set at 1.25 carrots on left plant and 1 carrot on right plant. The average PPFD of my 16 tops is 703 PPFD. I increased temps to 85 day 81 night to get leaf surface around 80 f during day. On day 3 the reservoirs PH is 6.2. The rez is 782 ppm. The blumats have started watering and I will monitor closely over the next few days. On day 4 the reservoirs PH was adjusted from 6.3 to 6.1. The rez is 717ppm. On day 5 the reservoirs PH is steady at 6.1. The rez is 706 ppm. The highest top is 15.25" from the light. I defoliated to bring in more air and light to deeper into the canopy. I increased the flow rate of blumat by .5 carrot on the right plant as it was a little to dry for my liking. The Clones are preforming well. On day 6 the reservoir PH is going down so I adjusted up from 6.0 to 6.2. The rez is 730 ppm. The highest cola is 14.75" from the light. The left plant had a runaway so I reduced blumat by 1 carrot. I increased flow of blumat on right plant by .5 carrot as it is still drier than I would like. On day 7 the reservoirs PH was adjusted from 6.3 to 6.0. The highest cola is 14.25". I reset rez with nutes.

The last week before harvest! I love Vanilla Latte Auto! Thank you Humboldt Seed Company for such a good genetics! I love you very much!...

✅WEEK NOTES: 20/01 LIGHTS OFF! Some days in the dark and cold box are great to increase flavors and potency ✅ 🌱GERMINATION🌱 01/10/2023 SEED IN THE SOIL 03/10/2023 🔝 10th NOVEMBER 1st FLOWERING DAY🔝 🔝 10° FLOWERING WEEK🔝 📅20/01/2023 LIGHTS OFF 📅 💡💡💡Viparspectra xs2000 at 75% Power + QUANTUM BOARD AT 75% POWER💡💡💡 💉🔍Fertilization schedule:🔍💉 ONLY PLAIN WATER 🧐 🤓 JEALOUSY DATA SHEET 🧐 🤓 Brand Zamnesia Seeds Parents Gelato x Sunset Sherbet Genetics 55% Indica / 45% Sativa Flowering Type Photoperiod Flowering Time 9-10 weeks THC 25% CBD 0-1% Height (Indoor) 150cm Height (Outdoor) 200cm Yield (Indoor) 650-700 gr/m² Yield (Outdoor) 700-750 gr/plant Sex Feminized 💸💸💸💸💸 Buy JEALOUSY FEMINIZED BY Zamnesia: https://www.zamnesia.com/9479-zamnesia-seeds-jealousy.html _______________________________________________________________________ 🔧💡OUR SET UP FOR THIS GROW CYCLE💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was incredibly fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com 💣Quantum board - 480w - 4x120w Boards Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D70/B08 - 24/01/24 ⚗️ 🌡️ 🌊 🍗 💼 🧠 pH is finally stable on the lower side (hopefully) 🚀 The Tent-X is on its way, I can't wait to get it.. 🎬 Added Timelapse video ________________________________ 📅 D71/B09 - 25/01/24 ⚗️ EC: 1.2 pH: 5.6 🌡️ T: 23 °C H: 45% 🌊 🍗 💧 💼 I put T-H Sensor of TrolMaster on the SCroG net 🧠 🚀Tent-X from TrolMaster received, I'm going to set it up tomorrow 🎬 Added Timelapse video ________________________________ 📅 D72/B10 - 26/01/24 ⚗️ EC: 1.2 pH: 6 🌡️ T: 23 °C H: 40% 🌊 Added 6L 🍗 Added Bloom A-B - CalMag - Big Bud - Bud Candy - B52 💼 Tent-X set up done ! 🧠 It works perfectly and as I just see so far, from now on, I'm going to experiment a new way to grow ! 🚀 🎬 Added Timelapse video and Set-Up videos and pics ________________________________ 📅 D73/B11 - 27/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 40% 🌊 🍗 💧 Added a little of pH- 💼 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D74/B12 - 28/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 35% 🌊 Added 4L 🍗 Added CalMag - Bloom A-B - B52 - Bud Candy - Big Bud 💧 Added some pH- 💼 🧠 🚀 🎬 Added Timelapse video and 4 pics ________________________________ 📅 D75/B13 - 29/01/24 ⚗️ EC: 1 pH: 6.0 🌡️ T: 23 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse video and "TM+ Pro" App screenshots. This is the app used to monotoring the Tent-X controller ________________________________ 📅 D76/B14 - 30/01/24 ⚗️ EC: 1.2 pH 6.1 🌡️ T: 18-26 °C H: 30-55% (from now on, I'll put the Min-Max values of T-H as I can easily read them from the app.) 🌊 4L 🍗 CalMag - Bloom A-B - Bud Candy - Big Bud - B52 💧 💼 I added a Humidifier as the H falls down to 30% 🧠 With the help of Humidifier, according with "TM+ Pro" app, I got the perfect VPD (Vapor Pressure Deficit) rate !! (see screenshots) 🚀 I have to face a very low rate humidity of the external enviroment 🎬 Added Timelapse video and T-H values daily graph, and perfect VPD from the Tent-X controller ________________________________

3 Nori Cakes still there. who continue to grow 😀 This week I start cutting a few lower branches from each plant. This way more energy should be available for the upper branches. For this culture, I would like to let each plant grow with a main bud without "topping". I would like the tent to be filled and look like a Sog in flowering. (a total of 16 plants with 5 strains in this culture) My goal: at least 300g of dry buds🤞 ------------------------------------------------------------ 💧Watering each pot: Day 15 : 0.75 L With a little Bio enhancer ( 0.8grams/L) Day 21 : 0.75 L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 60-75%) Night : 14-17°C ------------------------------------------------------------ 🤩Equipment of the week : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat 95x95cm. ON 45 minutes. OFF 30minutes. In a loop. The day only ------------------------------------------------------------ Thank you for your visit, it's always nice to see you!💚😀 ------------------------------------------------------------ My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/

3 Nori Cakes still there. who continue to grow 😀 This week I start cutting a few lower branches from each plant. This way more energy should be available for the upper branches. For this culture, I would like to let each plant grow with a main bud without "topping". I would like the tent to be filled and look like a Sog in flowering. (a total of 16 plants with 5 strains in this culture) My goal: at least 300g of dry buds🤞 ------------------------------------------------------------ 💧Watering each pot: Day 15 : 0.75 L With a little Bio enhancer ( 0.8grams/L) Day 21 : 0.75 L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 60-75%) Night : 14-17°C ------------------------------------------------------------ 🤩Equipment of the week : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat 95x95cm. ON 45 minutes. OFF 30minutes. In a loop. The day only ------------------------------------------------------------ Thank you for your visit, it's always nice to see you!💚😀 ------------------------------------------------------------ My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/

1/22/24 day 24 flower. Growing good, one pheno is growing into the light and into the fan but not too worried about it. 1/25/24 day 27 flower. Added another trellis because one pheno grew past it and is getting some burned hairs.

Zz

I trained them down to be more bushed out and watered with a PH of 6-6.7 and did a weekly water of Fish Shit. The humidity was at 57 then eased into a steady 52 for the rest of the week.

Hi and welcome to a new grow :) Unfortunately I have to start over because of a malfunction I had with the automation of the heater. I basically cooked my plants. But now we‘re back with three new Ladys, wich I hope will turn out as beautiful as in the picture. I planted four, just in case one of them doen‘t make it. I will choose the 3 faster ones of course. The medium I use is mixed with soilles media (peat ,vermiculite) with additives. It‘s basically sythetic but it still has microbes. The nutriensolution is also mixed syntheticaly. I‘m not going to explain everything right now but at this stage i‘m feeding the plant low amounts of the Veg formular that was recomended in different studies. The EC is about 1350. PH of the Media and the Water is about 5.8. I also have a CO2 bag but unfortunately it was cooked by my heater 😬let‘s hope the funghi survived. Since oxigen is very important for the roots I am pumping Air throught the watercontainer. It helps keeping it clean as well. I do have Hidrogen Peroxide as well, but i‘m not sure if i should use it for the extra oxigen. If any of you have experience with it feel free to comment! I will keep you updated on the plantgroth over the week but for now everything is setup. Have a nice Weekend 🌱 Update: The first three girls are coming out pretty fast. InicuallyI though the 4th seedling didn‘t make it but she came out a day later. that was part of the planing so we’ll see. The first three are roughly the same age too wich is awesome. Right now i‘m giving them around 200 ppfd/24h. The Temperature and humidity are stable at 26°C and 90% humidity (as in picture) now it‘s lowered to 75% wich means the VPD is roughly 8,5. Let‘s hope I don‘t cook them this time 🙏 Oh and the CO2 bag is alive. Update: I‘m experimenting with VPD and I figured out, that the leaf experiences a different VPD due to cooling of the leaf while water is transpiring. So with LEDs the leaves don‘t warm up from the missing infra red but luckily my Light gets pretty warm so i put it up hight and brighten it to 40%. The seedlings stopped growing at a Lux of 8000 so i put them on 13000 with a leaf VPD of 0,6. I used a VPD calculater and have the following environment: 27,5°C and 60% Humidity. The leafs are ≈24 degrees (if i measured correctly) and the caculator spits out 0,6-0,8 wich would be ideal. Let‘s see how they grow since they are seedlings i‘m not sure if this stresses them. If you have any comment, please feel free to wright is down so i can adjust if necessary.

Не, знаю, думаю еще подержать недельки 3 и рубить.

Absolutely stoked with my first grow. On the scales wet is 92oz so i am thinking dry maybe 35 ish. No major dramas along the way now to dry and cure. 🤙🏻

The plant is developing well despite the high temperature. During the week the weather got better, the plant is growing well.

The plant is developing well despite the high temperature. During the week the weather got better, the plant is growing well.

The plant is developing well despite the high temperature. During the week the weather got better, the plant is growing well.