Came out great and the smoke test was fantastic. The bud is so sticky that it’s almost inconvenient. I rolled a blunt and had enough resin on my fingers to roll a super tiny ball of finger hash at the end. The smoke is smooth but a hair harsh. I sleep so well after smoking this.

Be happy get couple ounce off blueberryz she really stinks, very fruity and starting to get frosty. Limoncello looking amazing caked in trichs strong lemon and pine smell. Bud seem to get fatter and each time I look at her which is often she's a sexy plant.

Week 13 9th week of flower. Light settings 12/12 on at 9.00am off 9.00pm Light power= 100% 240w Radiator settings LIghts on Turn on if temp drops below 21.5c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 18.0c Turn off if temp goes above 18.0c Extractor settings temperature 23c with 1c steps Humidity 35% with 2% steps Max speed 10 Min speed 4 VPD aim 1.0-1.4 DLI aim 35-40 Wednesday 19/4/23 Day 85 (Day 57 flower) Massive defoliation. Thursday 20/4/23 Day 86 (Day 58 flower) Nothing Friday 21/4/23 Day 87 (Day 59 flower) Flawless 2ml/L Ec=0.4 Ph=7.1/7.1 5 drop Ph D Ph 6.3/6.0 Autofeed 8 runs (2,3,5,10,15,15,15,15 total 80 mins) Flawless Ec=0.4 Ph=6.3/6.0 2L left Roughly 2L each. #1 0.1L runoff Autofeed 8 runs (2,3,5,10,15,15,15,15 total 80 mins) Water Ec=0.2 Ph=6.3/6.0 2L left Roughly 2L each. #1 0.1L runoff Saturday 22/4/23 Day 88 (Day 60 flower) Sunday 23/4/23 Day 89 (Day 61 flower) Cut scrog net and moved plants about. Monday 24/4/23 Day 90 (Day 62 flower) Raised plant #1 Tuesday 25/4/23 Day 91 (Day 63 flower) Manual water 2.0L This is the last weekly update for the grow as they are all being chopped sometime next week. The next update will be the harvest update in a few weeks time once its dried and had a 2 weeks cure. #1 Wedding Cheesecake FF is ready for the chop. She is very sticky, trichomes are just about where I want them to be. She is smelling absolutely gorgeous. Power used for week Light (2.69+2.68+2.68+2.68+2.69+2.69+2.68)=18.79Kw Extractor (0.58+0.58+0.58+0.58+0.58+0.58+0.58)=4.06Kw Fans (0.92+0.95+0.97+0.94+0.90+0.93+0.92)=6.53Kw Dehumidifier (++++++)=Kw Radiator (1.39+1.45+1.38+1.45+0+0+0)=5.67Kw Water pump. (0+0+0.03+0+0+0+0)=0.03Kw Total for the week=Kw Back in a few weeks with harvest and smoke review. Thanks for stopping by.

Floracion las planta que estaba amarilla se esta recuperando anda mucho mejor pirde menos hojas y las demas siguen en perfecto estado

Just removed some leaves and gave her a little bit fertilizer for bloom My first Cannabonsai, i am happy!!

Second Week / 15. - 22.05.24 🌿 Week 2 of my grow and my little green friends are thriving! 🚀 Strong leaf growth this week, just sticking to watering with plain water as it's still early days—no nutrients added yet. 🚫💧 Everything's running smoothly and the autos are showing promising vigor. Loving this journey so far, fingers crossed for more lush growth ahead! 🤞🌱

Super easy trim✂️ The buds are super dense & sticky🤩 For the smell it’s cherry & blackcurrant with a gassy touch the Cherry Cola Diesel ⛽️🍒

Looking very good. Healthy roots

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

Avevo staccato due cime per pianta delle kmintz. Mantengono quello che sentivo mentre le toccavo. La prima pianta sa di caramelle zkittlez con un fumo che nell aria non è il classico odore di erba ma qualcosa di incensato e mi fa impazzire.La seconda è decisamente più complessa. Zkittlez/frutti di bosco/nocciola/gas. Ho scritto oggi a Ripper Seeds facendo vedere un po di foto e mi hanno detto di tagliarle pure anche se manca qualche giorno rispetto ai 63 dichiarati dalla casa.Ho già ricomprato 5 semi perché le rifarò sicuramente se non il prossimo ciclo quello dopo. Le due Watermelon Zkittlez proseguono la fioritura. A settimana prossima coltivatori 💪🤞

D57/FD29 - Thing going grand with the Cookies so far (enjoying growing these Cookie Based Strains). Smell from it is divine! Touch a stem and its a lovely citrus smell left on you for ages! Noted in a previous comment, like a perfect sweetness, fresh lemonade. You'd wear it as an aftershave alright even!!! :P They're drinking a ton but not taking on as much feed (as I've come to expect now in flower) so dropped the base and bloom by 10% (same recommended ratio of 1:1) and kept the PK9/18 booster in there at what would be recommended strength for this week...its the same as last week but week 1 (week 4 of flower) of PK9/18 should have been double...didn't want to overdo it as when I used recommended strength 1st time I got it, it created some serious root zone acidification (Which could have been all the K getting used up but was a mare getting the pH up from 4.something every day!!!). Did my usual root flush/wash before adding feed as the EC had crept up to 2.2 (and I know from experience, that starts messing with your numbers if you don't wash that out right) and took about 50L-60L to get the tank to 0.3EC (base is 0.2) was was a lot of salt sitting on/in the roots. Had a ton of underscreen dead leaf to pick up and just cut some wee straggly offshoots (I know, bad idea this late in flower but they were basically dead/no nutritional value left so basically a bug magnet). Still waiting on Bluelab to send me the RMA approved pH pen...been 2 weeks now since the RMA was approved and still no postage - using an "essentials" pH meter and just dipping in Calibration Fluids between each feed add to ensure some accuracy (As you can see from my recipe page, I like to know what the feed does to the pH - also gives an idea on what they're feeding on when you see pH swings in a different direction that expected). Geeklight also got back to me. In all fairness, I've been dealing with them direct (Got the light fixture from Alibaba, direct from China - big gamble, right???) and they have been more than helpful. I have been telling them about the light randomly coming on at 5% (lowest brightness) and provided evidence; turns out someone else now noticed the same issue with the Remote App controlled variant too and they believed it was a loose control board/wire. They said they did some stuff and that fixed it but I also thought mine was fixed by forcing the dimmer to 0% and it still randomly happened (even though it didn't do it for weeks) so the other person may still get a surprise!! 😋 So, I took out the driver today, pulled out the control board and all wires seemed good and no looseness in the control board (although it does look slightly bent as the Spade for the IR/UV switch isn't fully bedded in). But, like I say, in all fairness to Geeklight, they're posing me a new control board tomorrow from China AND giving me the longer driver cables so as I can put the driver outside of the tent! Give me a bit more room for my Flower Initiator (and hopefully UVB Tube) and great to see them honouring the Warranty. RHC Seems to be flowering nicely as can been seen from the pics. Stacking well, buds coming along. Slight pinkish tip to the pistils on some buds but not the shocking pink as you'd see in the sales pics...hopefully it goes there though! Also noticing a bit of an early frost on a few flowers...like real good frost! And this is only day 1 of week 5 (I know, I do this diary arse about face)!!! Hoping Geeklight get this driver control board and longer cables to me quick so as I can get the driver out of the tent as I'd really like to get the UVB in there to frost them up in a week or 2!!! May only be getting about 9" clearance though so dunno, could be dangerous!!! 12" is the lowest recommended...but then, I could do the 15 min burst lighting (On 15, off 45 min every hour) so lower the risk of burn but get them more exposure (but lowers the lifetime of the tube). They get UVA from the LED's on the light at the moment for a 1/3 of the day and have been since early veg so should be hardened to it by now!!! Anyway, think that's enough s**te chatted by me!!! Happy growing all!!! 💪

Darkness was sketchy but glad I did it. Should have cut plant 1 last week. Plant two looks great. Smells like candy. So stoked. Have two mothers and 4 clones ready to go. Clones went into flower earlier then anticipated had to “reveg” them then back into flower so they look funky. Might do a flower diary to show.

ladies and gentlemen Welcome to peaky house gardens Have you seen the rainbow of colors that entered my house?👩‍🌾🏼 Guys....it's spectacular

******************************************** Growdiaries Grow 22 ******************************************** Welcome to my 22nd grow on growdiaries. I'm going to be stricter on this grow as i have been a bit lax on the last few and let them get out of control. My plan is no more then 12 colas between the 2 plants. I'm going to have a shorter veg period to keep them at a reasonable height. I'm also going to try to keep them away from the sides of the tent more then I normally do. Because I may be going away shortly I'm going to start in the final pot because sods law I'll be away when they need potting up. I'm running 2 photoperiods again, they are both from the MSNL catalogue. Plant #1 Lemon cherry gelato will be on the left looking in the tent and #2 Zoap will be on the right. This diary is focusing on #2 Zoap Nutrients. Ecothrive Neutralise Shogun Katana roots Plagron Terra grow (3-1-2) Plagron Terra Bloom (2-2-4) Plagron green sensation (0-9-10) Plagron power buds (0-0-0) Equipment on Smart plugs. 1. Light= Viparspectra Xs2000 2. Feed= water pump. 3. Extractor= Ac infinity 4. Oscillating fans= 2 on ext. 5. Cameras= 2 on ext. 6. Humidifier= ram 5L 7. Dehumidifier= 2L 8. Radiator= 1KW Tent settings. Light cycle=24/0 Light Power=100W (42%) Photone app has been Calibrated, and I have done a ppfd map over a 40cm×40cm area. Extractor controller settings High temp= 26c Low temp= c Temp step=0c High Rh= 69% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Radiator on= -20c Radiator off= +21c ******************************************** Germination/Prepwork. ******************************************** 📅1/10/24 Tuesday 📋 Prepared 12L fabric pots, filled with biobizz lightmix, then gave 2L water Ec=0.25 PH=7.0/6.7. Then 1L water with katana roots @5ml/L Ec=0.3 PH=6.3/6.3 No runoff. Placed pot into tent with no light on. 📅2/10/24 Wednesday 📋 Dropped the seed into 40ml of water with 5ml/L katana roots and 0.1ml/L neutralise solution at 5.05pm 5.00pm turned light on @ 100w 80cm above the soil, Ppfd=200, 24hr DLI=17.3 10.00pm placed seed into moist paper towel. 📅3/10/24 Thursday 📋 7.30pm tap root breaking through so put the seed into 12L fabric pot, and placed in the tent under constant light. 📅4/10/24 Friday 📋 9.00pm no movement yet. 📅5/10/24 Saturday 📋 🌱9.00pm above ground and cotyledons are open. Day 0 ******************************************** Germination summery. 📋 Nice quick germination. The zoap looks fine. Back soon. Take it easy. ********************************************

a plant very resistant to everything highly recommended...uff .... a knock out plant an earthy taste and pine ... with a dense smoke ...... and of compact and abundant buds ... a 4x4 all-terrain plant ... 100% recommendable ... with their healthy roots....00

~ FastBuds PAPAYA SHERBET Photoperiod~ Well here we go on another journey together through 'Canna-land' and this one's kinda special... forget that, it's VERY special because this is FastBuds newest surprise for the community, a FEMINIZED PHOTOPERIOD STRAIN!🤯 I was fortunate enough to score these seeds, of which only 1000 were available and can't wait to see what this strain can do! This Papaya Sherbet, according to FastBuds, is a hybrid with a 9-10 weeks flowering period. For a more detailed and accurate description of this strain the following from FastBuds says it best: "Combining the massive stature of Papaya (Oni Selection) with the strength and resilience of one of our best keeper cuts (Sunset Sherbet), this strain develops into a big, expansive bush adorned with numerous bud sites that later transform into a generous harvest of medium-sized buds. Papaya Sherbet flowers deliver a signature flavor of premium cannabis with subtle citrus undertones that emerge upon inhaling. During growth, her aroma makes for a sweet yet pleasantly bitter fragrance, giving you an idea of what the smoke will taste like. Notably stress-resistant, Papaya Sherbet is a great choice for growers working in challenging environments. She is very forgiving and rebounds quickly from any adversity, allowing growers the freedom to experiment with confidence that she will take everything like a champion she is. This strain embodies resilience, flavor, and abundant yields in every grow cycle." Sounds like an epic strain and I personally cannot wait for this lady to strut her stuff!😍 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Papaya Sherbet photoperiod indoors as our weather is still a bit too chilly to put a newly sprouted seedling outside (nighttime temp's dipping regularly into the 40's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures are in the mid 50's℉, which shouldn't be long. After which, she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes from BioTabs and slow release dry amendments from Gaia Green. Once she's established herself outside she'll be given periodic top dressings of Gaia Green 4-4-4 and 2-8-4 along with worm castings and Compost Tea's. Her grow area is approx. 5'x5' and I have posts and a trellis net set up already for when she gets bigger to aid in training her. Let the fun begin!🤪💚 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 5/23- Week three from seed and the second week of veg for the FastBuds Papaya Sherbet photoperiod and she's doing surprisingly well considering the crappy weather, and being eaten like a salad by slugs and a rabbit! 5/25- The diatomaceous earth that I spread around her seems to have lessened the attacks on her leaves. I've also been spraying her down every other day with Neem Oil, and every three days with an organic insecticidal soap that I'm sure has helped as well. I watered the Papaya Sherbet today via garden hose and began to train her branches a bit as well. 5/27- The FastBuds Papaya Sherbet continues to do exceptionally well with great color and vigor, putting out new growth it seems daily. 5/29- There's three weeks on the books for this little lady and I'm looking forward to see what she'll look like in the coming weeks! I will have to top dress her soon, probably in the next few days. I haven't added any dry amendments to her since I initially amended her soil and she's a hungry girl... Hope to see you next week, stay Blessed! Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏

Hi everyone 🤗. The buds continue to grow 😀👍. It starts to smell really good 😍. The bud structure also looks very nice, and is already covered with resin 😎. This week they continue to get 4-5 ml / l water from the Canna Bio Flores. I hope you enjoy the update, stay healthy 🙏🏻 and let it grow 🌱😃 You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3

Harvest Day