Llegamos al final, este apartado lo finalizaremos cuando probemos la yerba de momento colores rojizos y azulados, huele como a gas junto un transfondo dulce...una pasada merece la pena probarla!⛽🔥

Another two weeks down, and the tent’s definitely alive and kicking. Some branches started leaning over, so I tied up the colas before things got out of hand. I pulled CalMag for a bit, thinking it was leaving residue in the reservoir — but turns out the real culprit is probably the Connoisseur Coco base. Kinda sad, because I really like these nutes, but looks like they’re not the best match for hydro-style Autopots. They leave sediment. Time to move on. I added a 25-micron filter to the circulation pump, and that helped quite a bit — though it’s still not perfect. Next grow will be with CANNA Coco — hoping for a cleaner run. Lemon Orange already looks like it's getting flushed, even though I haven’t started yet. Gonna give it two more weeks and then probably chop. King’s Juice? That thing exploded — totally outgrew the scrog because I didn’t bend it in time. Bit of a jungle now, but I’m rolling with it. Oh — and they’re drinking like crazy: 2 liters a day from the res, easy.

.

Dear Growers , Welcome to Week 10 or Flower week 7 // Harvest Day from Kannabia Baby Boom Auto Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Kannabia Seeds • Tent: 222cmx150cmx150cm • Light: 2x 720 Watt Full Spectrum • Humidity: 50% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 6 The Pictures Showing genetic 1 and 2 of Lemeon Haze Auto If you want Germinitation results like mine , check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the Checkout . Stay curious and keep up Growing —we look forward to welcoming you back for the next Projects soon!

Genetics: O.G. Kush x Afghani Yield: 300 – 400 g/m2 (600 W) Flowering time: 8-9 weeks Height: 100 cm THC - Very very high equipment used: awning - Mars Hydro 4✖️4 light - Mars Hydro FC E 4800 fan - Secret Jardin 20w monkey fan ventilation - Soler&Palau TD-350 Silent with temperature and humidity sensor I am satisfied with the growth and development, the only negative is that it is impossible to keep the necessary humidity and temperature at the same time as the heater is on.

Flower

Replacement seeds not fairing well lol but chosen mothers are thriving

This is my first grow, felt like now is the perfect time to start. 😅 Picture 1 - The plants will have a 24h schedule with both sun and LED light. The solution with the cloth in front of the window is only temporary, I need something thats easy to pull up as soon as the sun comes out. My light is about 16in/37cm away from the plants, please let me know if its too close or too far away from the seedlings. Up until this point I germinated both the seedlings using one of those 'Easy Start' Kits with Microorganisms, I then just transplanted both plants with the soil still attached to them in the final pots. I am using Bio Bizz Light Mix for the soil. In about 1 week I will start adding the fertilizers, I will go with about half of what it says on the nutrient schedule because these are autoflowers. Picture 2 - Day 1 - Seedling number 1 is looking healthy. (I think?) As you can see I put a hygrometer next to it so I can monitor the Humidity and Temperature levels. I currently have a humidifier running next to the plants and humidity levels seem to be good so far. I read online between 65-80% are good at this stage. Picture 3 - Day 1 - Seedling number 1 again. At this stage I only water around the plant and dont soak the whole pot, I read that soaking the whole pot while the plant is this tiny can overwhelme the plants. I also noticed that the leaves look kinda yellow-ish? Please let me know if thats normal. Picture 4 - Day 1 - Seedling number 2. I need help with this one I dont know why but he doesnt look good, from the beginning he was much slower than plant 1 and when he finally popped out he looked like he was dying, he is kind of gaining a little bit of color now again but I dont know if he will make it. If you know whats wrong with him please let me know. I hope he opens his two little leafs soon. I still have a third seed laying around so please let me know if it'd be smarter to just abandone number 2 and germinate a new seed. Thanks for reading this far and I'll update as frequent as possible. Day 1 Issues Update - After taking a look at seedling number 2 again and seeing that after all this time it still didnt show any progress, I noticed that one of the two first leaves is actually cut. I mustve damaged it while inspecting earlier because I, (stupid newbie move), touched it too much or whatever. Now germinating my last seed in hopes that all goes well. Since I dont have anymore 'Easy Start' kits im going to try a different germination method, I will put the seed in a cup of water with a piece of cardboard on top of it overnight (12-15h) and then plant it into the moist soil afterwards. 😄 Picture 5 - Day 2 - Seedling 1 is still doing fine. In the morning the temperatures went up a lot (29 Celsius), due to the sun shining a lot through the window, and the seedling was showing slight signs of heat stress (Leafs going up and small yellow-is tint), I then opened the window and the Temperatures quickly dropped back to normal (20-23 Celsius). Moisture levels seem lower than yesterday and Im not sure why (probably because of the heat and opening the window?), still at a solid 62% tho so Im not too bothered. Picture 6 - Day 2 - Since my last Seedling 2 died I germinated another one, I put it in a glass of water over night (~15h) and then planted it into the soil. Hopefully it'll pop out in the next few days... 💪 Picture 7 - Day 3 - Everything looking good with Seedling 1, I kinda felt like it was sort of streching too much instead of growing its leaves, so I put the light closer to it. I will water again tomorrow, the last time I watered was when I put it in the soil 3 Days ago. Picture 8 - Day 3 - The new Seedling 2 is still germinating and will hopefully pop out of the soil in the next few days. Picture 9 - Day 4 - Seedling 1 still going strong, leaves are praying but I read that that is a good sign. I watered both pots again today with just Ph-water, will add fertilizer in about 3 days for seedling 1. Seedling 2 is still germinating, will post a new picture as soon as it pops out of the soil. 😉 Picture 10 - Day 5 - Seedling 1 looks healthy, but is going kinda slow. Turns out I had the light far too high... 😐 Pulled it as much down as I could now and its already growing better! Main indicator for not enough light was the stretching and the thin leaves. I will probably have to invest into a bigger setup as soon as flowering hits. ✊ Picture 11 - Day 6 - Seedling 1 leaves are getting bigger and the next set is already on the way. Picture 12 - Day 6 - After 4 days germination, seedling 2.1 finally popped out the soil! 👏 Picture 13 - Day 7 - Seedling 1 leaves seem a bit curled up, probably because of the hot sun this morning, Im not too worried tho. Will water with nutrients the first time tomorrow. Picture 14 - Day 7 - Seedling 2.1 looking fine, soil was pretty dry so I watered it a bit with ph water.

Day 76: Watered the plants 0.5L with nuts 909 ppm, 1921 us/cm, PH 6.4 Day 79: Watered the plants 0.5L with nuts 875 ppm, 1861 us/cm, PH 6.4 Day 81: Watered the plants 0.5L with nuts 864 ppm, 1831us/cm, PH 6.4 Flushed one plant with 10L clear water

Week...12🤠 So we're getting cold mornings, days are still sunny and worm She's a strawberry..well sorta speak😁 but tbh, I don't like the look of her😕 I did some re-tying, so she has a flatter and a bit more even canopy (you can't see that on the photos) and found what has been eating my leaves, cute but annoying🤠 I've also tied some string to the branch wires so it all grows level with the ground I know I said I won't, but I had to, so I did..I cut some leafs. She had to many whitch needed to go, so I decided to cut them before she starts to flower I've watered her with 17L of water, ph 7.15 because of my bad soil Also soon in the next week or two I'll start making my drying box, hopefully my plants won't die before harvest😁🤠 Looks like that's it for this week, it was a good week in terms of growing, so I'll see you next week!🤠

3/16: Rain let up for half the day, but more tonight...damnit... They are due for a watering tomorrow, but with the high RH, maybe not... 3/17: They weren't ready for water yet, so I slept for a few bonus hours! (rare) Both of these plants continue to pack on the pistils with no signs of slowing down...I thought surely the shortie would be ready to flush this week, but she's not even close to ready yet.😕 It rained for most for the day....again... 3/18: I watered them with about 1/2 gallon each including terpinator, signal, sweet & sticky, cal-mag, armor si, endoboost, humic acid, and a little cha ching. It rained all night again..and most of the day today. I took some photos with the qb's turned off and a 135w 5500k CFL on.. 3/19: It rained all night and several times again today...ffs....I've started building an Ark in my free time 😁 3/20: Rained again on and off today..RH still too high... 3/21: I took the shortie out of the closet today to inspect her trichomes. I took about 2-dozen close-ups and zoomed in really close on my PC and couldn't find a single amber anywhere...and prolly only about 30% cloudy at this point.. I went ahead and took some cuttings from her while I had her out. Hopefully I can get at least one to survive and grow outdoors this season. I also took some cuttings from the FFT#6 (the other shortie), and I started a couple of other FFT's (5 & 7) which I'll train out as horizontally as possible to match the shortie's heights. 3/22: Rained again last night several times...and again today for a couple hours...ridiculous. Woke up with RH at 65%!!! Been chatting with other FFT growers and they all seem to be losing a lot of produce to botrytis...I'm starting to freak out..😳

STARTING TO SHOW SOME N DEFICIENCY ON THE LOWER FAN LEAVES. WILL NEED TO AMEND A LITTLE THIS WEEK TO CATCH UP. BUDS R NOT BIG. NEITHER IS PLANTS. I THINK STILL EASIER TO GROWN INDOORS. MORE CONTROL AND AUTO SEEMS TO GO BETTER INDOORS FOR ME. I DONT KNOW IF OTHERS FEEL THE SAME WAY. BUT DEFINITLY MORE ECONOMICAL TO GROW OUTDOORS DURING SUMMER SEASON. FREE SUN.

Hi guys, What's up? Welcome back My beautiful girl continues to give me immense satisfaction like when a daughter gets good grades at school.... that is, you know you've done a good job in any case 😄🤗 I hope you like it too

The 6 plants came out of the ground 😎 Even if the seeds were quite the same after germination, there is a significant difference between the plants growth. I will wait until the transplant in the final pot, but I already have a good idea about the 3 final candidates 😏 I've decided to increase the light power during the week because the plants bear the light intensity. Plants heights at the end of the week : ------------------------------------------- Blackberry Cake 1 : 1,5cm Blackberry Cake 2 : 4,5cm Jack Herer 1 : 9,5cm Jack Herer 2 : 9cm Cashew Kush 1 : 10cm Cashew Kush 2 : 1,5cm

So amazing strain

So for this week the training comes into play . So 1 ogkz was topped, 1 ogkz was broken , * note on the brake it was the best brake I have done , not because I am getting better at it mostly because the outer skin of the plant with the OG kz was much thicker and stronger than I'm used to so it broke quite easily. My guess is the correlation with the autoflower plays a big part in that. And 1 ogkz I just left it be . Green crack 1 kept as a mother 2 were broke 2 topped

The plant is growing very good i dont see any problems. I started with the LST training and cut 1 branch of wich wouldnt get much light.

💚💚💚