Recommended
Likes
Comments
Share
Phone was out of action , will try and fill up the missing weeks , 3 plants have been harvested All photos taken day 76
Likes
3
Share
Likes
4
Share
On week 6, thought they were coming up to harvest but still keeps popping pistels.. probably another few weeks till they are finally done
Processing
Likes
21
Share
********Week 1 Flower - Sept 19 to 25, 2020******* We switched to flower this week and put in the first SCROG layer.....been busy😃These girls have been pretty happy this week given they have grown quite tall and buds are setting and moved on to stacking already. Great signs so early on😎🤞 I had LST on the girls and then decided to remove the ties since they were topped and under a net so maybe stretch wouldn’t be too bad.......ties went back on at the end of the week😃💪🤪 Pheno 4 has on branch that had HST done and knuckle formed, still growing up so had to keep it tied down as well. Down side to running a 9 week veg, if they want to get big, they will😂😂😂 Pest maintenance this week as we are getting the last days I am able to comfortably spray the girls. Lost Coast Plant Therapy to keep the gnats, aphids and thrips in check😃 Keeping the waterings up and getting a fair bit of runoff from the feedings but that is best for Coco to avoid lockouts and pH issues. There were only three feeding days this week. We switched to bloom nutes for base and added silica for supplementals. Vitamin B and Kelp coming from B52 and sweetener for the microbes from bud candy, Bud Ignitor doing its thing as PK boost. As well as Sensyzime to let the enzymes clean up the root zone because they have been in the pots for a few weeks now. Little more detail: Sept 19/20 - Day 1 - Plant Therapy @ 5ml in 1L water. Ph to 5.4. - Folier spray applied to whole tent half hour before lights on, used 3/4 of mixture - Feeding mixture was Sensyzime @ 1ml only - 25ppm and 5.2pH......missed it a bit. - each girl given 3L - SCROG put in Sept 20/20 - Day 2 - Sprayed the last of the IPM mixture on the tent tonight. - Noticed several small shinny spots on leaves later today.....suspect from Folier spray on leaves. Sept 21/20 - Day 3 - Nice full strength week 1 mixture applied today - Rhino Skin, Cal Mag @ 2ml, Sensi Bloom A&B , B52, Bud Ignitor, Bud Candy @ 1ml. - 625 ppm and 5.7pH - 3L given to each girl.......not enough runoff.....bump feedings up to 4L going forward. - silica added today. Sept 23/20 - Day 5 - CalMag @ 2ml, Rhino, Sensi Bloom A&B, B52, Bud Candy, Bud Ignitor @ 1ml. - 850ppm and 5.9pH - 4L given to each girl. - better run off amount That wraps up the first week of flower........The net is in and the lights flipped. The girls were ready for flower and now we just need to keep giving them what they want for the next 6 weeks and then coast from there👍 These are some strong and fast growing girls.....keeps a grower on their toes! I expected the heights to be where they are but must admit I was hopeful that was the end of week 2. Issues will come in when trying to ripen the bud around week 8. They are growing so well right now.....keep them happy and in the end everyone is happy👍❤️👍 Such a solid strain @Sweet_Seeds......a great hybrid you should be very proud of!!! 🙏🙏🙏
Likes
4
Share
Bud development first week.. added some beneficial CO2 into the atmosphere.. I have never measured with PPM meter I just go by vibe and 1 hour intervals tank running 15 on the tank meter
Likes
7
Share
Se acerca el fin para esta hermosa LCC, los tricomas están casi en el punto justo y la cenecencia se logró con éxito, ahora solo esperar un poco más y estaremos cosechando con casi 76 días desde que salió a la superficie 🤓
Likes
86
Share
28/02 se riega con Amazonia roots 3g/L Viene creciendo muy rápido 02/03 se riega con agua 04/03 se riega con 700 cm3 de agua de ósmosis inversa + 300 cm3 agua de la red + 0.7ml de cal mag. + 0.5 de top auto (macro y micro nutrientes) en una pequeña dosis para que se mueva más rápido! Ec final 0.7 ph 6.2 06/03 se riega con agua + calmag
Likes
9
Share
KICKASS AUTO by KANNABIA Week #8 May 21st-28th Week # Flower This week she continues to fill in her where it counts her bud sites are getting thick and her trichomes are like sugar dust and she getting a nice little arouma about her. She's got evenly spaced bud sites that run down the stem she's in a AC INFINTY 3 gallon cloth pot feeding her nuts twice a week until run off then water every other day. Thank you for stopping by!! Stay Growing!! Kannabia.com Kickass Auto
Likes
9
Share
Growing: 5 weeks Flowering: 9 weeks This was my first grow indoor from some time ago. First time using the Mars Hydro SP250. Was amazed at the result, did not expect it. Encountered a few problems, including Calmag deficiency and some bugs. Did not gave them water for 30 days after plantation to the big bags of 25L. Harvested all plants at the same time, which might have been too early for a few ladies. Nevertheless I enjoyed getting to know the lamp and hoping I will do better next round. The lamp was in this round not at max capacity but at 226w, it came like that out of the box and I did not adjust it. Also did zero defoliation which resulted in a lot of "Albino Tops" under the net, which I recovered to make butter and bubble hash from. Most of the buds above the net where really dense and not fluffy at all. End result: 320gr total, around 4x 70gr average from the 2x BB OG, 1x A.M.S. and 1x Jack, the Purple Bud gave around 40grams. Thanks for checking out my grow! Good luck growing!
Likes
8
Share
@cnkice
Follow
Finally finished building my DWC tank this week. So far everything is working great. Per the week 1 grow question suggestion I have added a water transfer pump to top off the 27-gallon reservoir. 2 seeds died during germination, will add another 2.
Likes
10
Share
Changed watering to every 5 days water until runoff they seem to enjoy it. Signs of Thrips I believe so sprayed them with neem type spray hoping that does the job. Continued with LST and ponytailing. Defoliated a very small amount. Hoping that both Banana’s go into flower next week.
Likes
12
Share
@GrowGuy97
Follow
Day 14 - 3 out of 5 are growing a little slow/weird, all 5 seem to be growing kinda slow compared to my first run of autos but hopefully everything does good🤞🏼 Happy growing friends🌱✌️🏼 Day 17 - Still have 2 extremely weird looking ones, really hoping they bounce back🙏🏼🤞🏼 Day 18 - 3 out of 5 still going strong, the other 2 havnt changed much!
Likes
9
Share
IM SLOWLY MOVING ALL THE PHOTOPERIODS INTO THE 8X8 TENT. THEY HAVE BEEN IN VEG FOR TOO LONG AND STARTING TO SHOW ROOT BOUND SYMPTOMS, SO IM HOPING I DIDNT WAIT TOO LONG TO FLOWER THEM🙏🙏🙏🤞🤞🤞 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
4
Share
Small review on the viparspectra v300 that I used, maybe it can be usefull If someone are looking for a budget light: Cons: -it's noisy! if you are growing in your bedroom or living room etc.. keep it in mind. -the spectrum it's poor, lot of blue n little red, no green, yellow, orange, uv etc.. -it covers a little less than what the vipar claim. Pro: -among the made in china's led is one of the best built and has a long and reliable warranty period. -it's really good for vegetative. -it's very cheap to conclude, it will grow your plant quite well but do not expect super results.
Processing
Likes
19
Share
Leaves are looking chunky on this one Top or not to top ? Day 17 Note Watered with plane tap water And finally Top her feel she is going to be a beast Day 21 Notes Repotted into a larger pot
Likes
10
Share
09/21/24 - Purple Punch 👊 & Green Crack 💚 Both these girls got the lollipop 🍭. All the winners stayed 🏆 😂. They got a bump up in the PPM, and we also increased the TPS Signal for the 3gallon dunk to now 3ml. 100% Bloom juice now. Runoffs are in the 6.3-6 4. So they thriving. 09/24/24 - Purple Punch 👊 & Green Crack 💚 Both these girls are drinking heavy, and already starting to see frost on the PP. We have them a top feed of just pH 7.2 water, to hit the 6.4 runoff.
Likes
10
Share
@Diegobike
Follow
Esta planta realmente fue Muy rápida ya que se le recortó el tiempo de vegetación para alcanzar una buena floración en el maceto en el que estába, fue un experimento para ver qué podía hacer esta cepa en poco sustrato para minimizar gastos las fertilizadas también fueron mínimas y con fertilizantes naturales elaborados en la zona.como lo son: humus de lombriz y en floración melaza hubo algunos problemas de mildiu oidiom pero se solucionaron con una mezcla de leche con bicarbonato de sodio y así como vino se fue el hongo. Es una planta muy resistente tanto en vegetativo como en floración en su floración el olor de la planta es muy fuerte solo por pasar cerca de ella te envolverá su olor. En conclusión estoy feliz con los resultados y la rapidez con la que fue cultivada esta cepa sin duda la volvería a tener en mi jardín