Vamos familia, actualizamos la cuarta semana de floración de estas Fruit cake de Seedstockers, salieron las 3 de 3, 100% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 3 ejemplares seleccioné los 2 mejores para completar el indoor, también cambié el fotoperiodo a 12/12 y apliqué una buena poda de bajos, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen tanto que se me fueron de altura un poco, la solución fue doblar un poco las plantas, también están formándose las flores y ya empiezan a producir tricomas. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

23.08 The Drainmaster moved into the tent to control the drain. Defoliated and lollipopped them. 25.08 First run with the drain system. Nutrient Solution (Tank): Volume: 8.5 L EC: 3.05 pH: 5.5 Nutrients: Advanced Nutrients Micro/Grow/Bloom + CalMag Irrigation Run: Pump time: 30 minutes Total Drain: 5.0 L (≈ 60%) Drain EC: 2.6 Drain pH: 6.0 🔎 Observations Drain volume was far too high (target is ~20%). Drain EC lower than input EC → medium was relatively “empty”, plants absorbed nutrients quickly. pH drift from 5.5 → 6.0 shows some buffering effect left in the reused substrate, but limited. Substrate behaves more like coco than soil now (low buffer, fast response). 💡 Insight / Lesson Learned 30 minutes pump time is way too long → resulted in 60% runoff instead of 20%. For 8 × 1 L pots, a single irrigation event should be ~1.0–1.2 L total, with ~200–250 ml runoff. Solution: shorten pump time to ~5 minutes and re-test runoff. Better approach: run shorter, more frequent irrigations (daily) with a lower EC (2.0–2.2), instead of heavy feedings (EC 3.0) only 3× per week. This will keep EC more stable in the root zone and prevent salt buildup in the tiny 1 L pots. 27.08 Adjusted the pump timer to 5 minutes, gave the first dose of PK13/14.

Day 43 12/08/24 Monday Feed today, it was warm again so they drank the whole 300ml each so I have topped up another 150ml to see run off to prevent salt build up. Thriving 😍✌️💚 Day 45 14/08/24 Tuesday Water today using de-chlorinated tap water pH 6. With Plagron PK13-14 and power buds. Noticing the stretch stop, and now packing out there bud sites 💪💚 Day 48 17/08/24 Saturday Another watering today using de-chlorinated tap water pH 6 only. Picture and video update ✌️ 💚

Hi all! 😊👊 Week 1 flower

What up Fam, weekly update on these, they're a little upset with me from the fading and a few crispy leafs from messing up the ph. Over all still seeing daily growth with the flowers so I think they'll pull through fine. Excited to see how the next couple weeks go. Happy Growing.

30.04.2024 Continue into week 9 Clean nutrient tank for the last time...This is last week of flowering for almost all girls. Electrical Conductivity (EC): 0.8 for this week.. Purple Lemonade: First pheno is insane! Shape, size ,color, bud hardness, appearance, frostiness' all attributes to become photo model! Beautiful and high odor in the room! Lighting Parameters: PAR Map: Maximum PPFD is 800, minimum PPFD is 550. VPD: Ranges from -0.1-1.1 Daytime Temperature (DT): 23-24°C. Nighttime Temperature (NT): 19-20°C. Leaf Temperature: 21-22°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 60%, positioned at a 45-55 cm distance. Girls drink less water, so for this week and till the end of flowering new misting timing's Daytime: ON for 50 seconds, followed by 30 minutes OFF. Nighttime: OFF for 50 seconds, followed by 45 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.80 and 6.00. Stable PH, small drifting up and downs EC: 0.87 Temperature: 19-21°C

As the rain continues this girl is showing her potential…I clipped a few clones from her this week…she is recovering successfully. She has about four more weeks in veg before I let her flower bin the start of 2026 Jah Guide.

Na

🍀🍀🍀🍀🍀🍀🍀

Big defoil day 43 and she pretty much into the light

Business per usual

What another great week!! The 5 Fastbud Wedding Cheesecake autos are looking great!! I started on veg feed this week on Monday , 1 tsp Rapid start , 1 tsp Calmag, 2 tsp micro , 3 tsp gro and 1 tsp of bloom, PH at 6.5 !! They are underneath my HLG Scorpion Rspec at 100%pwr , 49 inches to floor at Par 500-520 ! Loving it in their AC Infinity 3 gal pots ! Can’t wait to see these babies in their prime!! 😍😍 Y’all have a great amazing safe weekend and don’t forget Peace, Love, an Positive Vibes to you all beautiful ppl! Happy grows ✌️💚 Cheers

This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned

Welcome to Flower Week 10 and harvest of Divine Seeds Auto White Widow For this competition, I’ve chosen the Feminized Automatic strain: Auto White Widow Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 58 Days • Strain Info: 20%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 3 • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Hey now, hope everyone is having a great weekend! The Donuts is flushed and ready to chop, the flowers are very dense and smell amazing. I will start flushing the Cherry Garcia tomorrow, and the Apple Fritters and Durban Thai X C99 need another 2 weeks or so. Hopefully the flowers continue putting on weight. Thanks for stopping by, stay safe, and blaze on!

Amazing, she totally resined until her big leaves were covered with ice, something beautiful her scent of vanilla something fruity with sweet indicates that her care was well associated with her so, the most of this girl we can hope for.

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱