Likes
Comments
Share
Day 15 Update : Decided to grab a tape measure to check canopy heights on a whim and discovered that my light was hanging 35 inches from “Cellie” Cereal and Milk . Wowzers 👀! So I raised the plant to be 26 inches from the light that I also dimmed down to about 40% . It works out that I can try to get the most out of the end of flower stretch for the older gal who shall no more than be mentioned for reference to accentuate the great glorious glamorous “Cellie”. The humidity plummeted after I did a major defoliation of the older gals so I adjusted the airflow rate of the lower in-line fan and the upper inline exhaust fan with the carbon filter . I lowered them both to the lowest setting & the humidity returned to “normal” Let me explain my reasonings/thinking behind my adjustments which are experimental at BEST. It’s worth also mentioning without having to preset a single thing on my 70pint Dehumidifier located inside this tent it is legitimately only plugged into my PRESET humidistat controller which is set to 50%-46% RH WITH an alarm on highs of 55% and lows of 43% . In real life what this translates to is when this humidity controller triggers the dehumidifier ON @50%RH immediately the fan of the Dehumidifier begins running. However this does not help the rising humidity that is occurring (it will reach 55%-60.2%RH ). Given a fixed amount of time , the condenser(atleast what it sounds like . .again, it could be anything) turns on . It is when this “condenser” “sounding” component begins working that the humidity IMMEDIATELY plummets down to my low point of 46% So to make a long story short the humidity gets vacuumed to 46%RH & the dehumidifier turns off, bc of the PURPOSEFUL EXPERIMENTAL TWEAKING making all air exchange fans low leveled the humidity slowly but steadily rises to 50%RH then the dehumidifier is triggered on but only the fans initially and the humidity eventually reaches 55%RH-60.2%RH & then the humidity gets all its hair snatched out by the dehumidifier and drops back down to 46%RH. 😮‍💨😮‍💨😮‍💨😮‍💨 with all that said of anybody was even interested per my tents leaf canopy height temperature average good to great OR LITE GREEN TO DARK GREEN VPD for my temperature begins @ 60 & ends @ 52 which is kind of a perfect storm for OUR GIRL “CELLIE” oooooooorrrrrrrrrrr sssssssoooooo I think/hope . She still hasn’t needed watering since being transplanted, she should now ready and willing to stretch those toes and we need the opportunities to top water that soil a few times to make those dry amendments available to her . More pics of later the week coming as we go . . Hopefully . Diligence is a practice
3
102
Share
@Aleks555
Follow
Dear team TrolMaster Europe, We would like to express our sincere gratitude for providing us with the Tent-X controller. We are delighted with its functionality and performance! We are confident that this controller has significantly aided us in our journey with our beloved plant Jealousy from Zamnesia.💪🤝 We were pleasantly surprised by the efficiency and ease of use of the Tent-X. It seamlessly integrated into our plant care system and helped us achieve incredible results. Once again, thank you very much for your support and high-quality equipment. We are immensely satisfied with your product and hope for long-term cooperation in the future. Today marks the end of our journey with Jealousy from Zamnesia💚, and we want to express our heartfelt gratitude to Zamnesia for their support throughout this entire journey. We also want to extend our thanks to Plagron for providing us with their high-quality fertilizers. Their products are not only effective but also incredibly easy to use. We highly recommend them to everyone!
3
3
Share
@JSanchezz
Follow
Finally harvested after a long back and forth whether too much fertilizer or too little fertilizer, I came to the conclusion that the left ladie was simply ready much earlier, which was probably due to the Co2. I'm looking forward to the weight and the taste it will take another 14 or at least 30 days until I know 2nd GROW :) Thanks to everyone who helped !!!
1
3
Share
@Franco123
Follow
Hi today I realized that the plant is a male, and it came out autoflowering being an f2 of DonDiablo that in F1 a cross of a photodependent female and an autoflowering male there was a 25% chance that it develops if an autoflowering, but or decided not to keep it because I don't like autoflowering plants very much and I want to get it to become competent photodependent so later I will put other seeds in the hope that they come out photodependent
1
31
Share
La aventura ha acabado antes de lo esperado, entre las condiciones climáticas y el ataque de un jabalí 🐗 han acabado con este proyecto, la próxima vez será 😃
6
25
Share
3
2
Share
the growth , the growth , the growth i have seen nothing but good thing from fastbuds the smell is starting to ripen and fill tent nice and dense nuggets are def inbound leaning to the side after ties was removed from heavy lst
3
21
Share
4
13
Share
@SgtDoofy
Follow
April 11 Just got done with some serious defoliation. Removing all kinds of nodes that would have wound up as less than popcorn bud while taking up valuable space in the light. Some of the tips of the leaves up top got sacrificed as I waited to feed for a bit too long while I wanted for a calmag solution to be delivered. Little ugly, but no worse for the wear.
1
8
Share
The plant is starting to show signs of early bud sights, and producing large fan leafs as well as good healthy gassy smell
4
3
Share
Used Gaia Green Bloom to Top dress about Week 3 of flower Introduced a couple Pluto runtz Plants in the front Cause they accidentally Flowered 🤷‍♂️
7
40
Share
@BLAZED
Follow
Week 16 (Harvest) 1-2 Drying day 1 Temperature: 24.5 to 19.5 degrees Humidity: 65% to 50% The girls are ready to be harvested! Before chopping them down, i took a lot of pictures. I was able to remove most of the soil from the Biscotti #2 to see the rootball. I hang the plants as a whole to have a slow dry. The exhaust fan is on setting 4. 2-2 Drying day 2 Temperature: 19.1 to 17.5 degrees Humidity: 62% to 57% I changed the exhaust fan to setting 2 because setting 4 was a bit high in my opinion. 3-2 Drying day 3 Temperature: 19.9 to 18 degrees Humidity: 62% to 59% Today i checked up on the drying plants, and i see there are some buds touching other buds, so i chopped the plants in half. The buds are still to the main stem for a slow dry, but are hanging more spreaded out to prevent any budrot issues. I changed the exhaust fan to setting 1, as someone told me that it was enough air movement for drying. 4-2 Drying day 4 Temperature: 19.8 to 18.5 degrees Humidity: 62% to 59% 5-2 Drying day 5 Temperature: 19.9 to 18.8 degrees Humidity: 62% to 59% Today i checked on the drying plants and the buds are shrinking a bit, they are getting a little bit crispy on the outside aswell, I hope they wont dry as fast, and i aim for a 12/14 day dry. For the next grow i already germinated 2x Chemdog (GreenHouseSeeds) 2x Gorilla Kush (GanjaFarmerSeeds) and 1x Deep Candy CBD (GreenHouseSeeds) And I have some upgrades planned aswell! I bought a autopot kit with 4 15L pots, this way the plants will have water and air 24/7 whenever they need it. I have seen alot of great results using autopots so i am very exited to try it out! And I bought a small camera so i can shoot some weekly timelapses! Feel free to Follow me if you like to get notified for the upcoming diaries! Thanks for checking out this diary, peace! (More harvest updates coming in the next couple of days!) Huge thank you to Zamnesia for the seeds, and Plagron for the collection of nutrients, and the opportunity to participate in the POWERBUDS contest! It was a fun and learningful adventure!