Likes
Comments
Share
We’re done! Thanks a lot again to Zamnesia and Greenhouse, next big shoutout to Spiderfarmer and Biobizz. For further updates and more stuff hit me up with a follow on IG @herrnlubitz88 Stay tuned for next run!
Likes
94
Share
Last straight before flushing this run was very pleasant and relatively easy I feasted on this session On these different tests I learned a lot about cars Among other things that the LST is essential and that the different apical or other sizes are to be avoided because their predefined life cycles do not allow them and this generates a loss in performance To return to my five damsels The northen light auto at @RQS was the fastest the first amber trichomes appeared at day 56 I did not expect taken from court I start rinsing The bubblegum from 00seeds still has not bloomed I plunged into the dark 20h .... The blueberry auto # 1 of pevseeds is simply gorgeous rugged and will surely give me a nice harvest it has suffered pinch of Apex and LST The gorilla glue from @fast_buds is not left smaller than the bonsai style but very well trimmed she suffered LST Apex pinch and size of the main apex ... Et en français Dernière ligne droite avant le rinçage ce run à étais très plaisant et relativement facile Je me suis régalé sur cette session Sur ces différents test j'ai beaucoup appris sur les autos Entre autre que le LST est primordial et que les différentes tailles apicale ou autre sont à proscrire car leur cycles de vie prédéfinie ne leur permettent pas et cela génère une perte au niveau du rendement Pour revenir à mes 5 demoiselles La northen light auto de chez @RQS à étais la plus rapide les premiers trichomes ambrés sont apparus au jour 56 je ne m'y attendais pas pris de cour je commence son rinçage La bubblegum de chez 00seeds n'a toujours pas fleuri je l'ai plongé dans le noir 20h .... La blueberry auto#1 de pevseeds est tout simplement magnifique robuste et va surrement m'offrir une belle récolte elle a subis pincage d'Apex et LST La gorilla glue de chez @fast_buds est pas en reste plus petite du style bonsaï mais très bien garnie elle a subis LST pincage d'Apex et taille de l'apex principal La blueberry auto#2 de @pevseeds Est pas mal mais on voit nettement que le main lining subis la stréssée et par l'occasion perdre de sons rendement final je souligne la robustesse de cette variété Merci à tous d'être passé pas ici Que la force soit avec vous !
Likes
3
Share
Put the seed in a Paper towel and in a Tupperware. Put the Tupperware in tent ON TOP of the lamp. They popped after 15 hours! Super fast. Ladies and Gentleman LET'S GROW! 🤙🏽
Likes
23
Share
@GrowGuy97
Follow
Everything seems to be going ok, 2 of the 5 are a little behind as far as how fast they are getting buds Update buds are getting much more frosty
Likes
27
Share
Questa settimana ho deciso di montare una lampada di supporto a LED per poter far arrivare a tutte le piante abbastanza luce, le piante continuano a crescere e i fiori sembra che stiano maturando per bene spero di raccogliere almeno 4/5 piante entro 2/3 settimane,perché alcune sono molto indietro rispetto ad altre.
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂 1/18 11:58AM. BRAM STOKERS TRAILER PARK DRACULA........I SHOULD BE WORKING ON THE PLANTS BUT THIS IS REALLY GOOD. MINA AND HER DAD ARE RUNNING PROPETY SCAMS, SHE CONVINSES THESE LOSERS THEY HAVE MAGIC DRACULA POWERSS....AND WE STEAL THEIR TRAILLER. REINFEILD RANDY , JULIANFIGURES IT OUT AND BLACKMAILS BOTH OF THEM. AND MUSICAL GUEST KISS!! A GREAT HALLOWEEN EPISONDE.... OH I FORGOT I AM SUPOSSSED TO BE GRWOING PIT.
Likes
37
Share
Hey guys, it's been a great journey but I've finally hung my Stardawg out to dry! Yesterday was their last day totalling 8 weeks on flower. Realistically they could have benefited from a further week because the lower buds are somewhat underdeveloped but then I would risk losing the preferred sweet high smoke of the top buds. With this being my first attempt it's been a great learner not only for how to care for the plants but also the environment. As soon as these went into flower and started stretching I knew that putting 6 in a 2.4 x 1.2m tent was a bad idea. They just got so big which is the cause of the lower sites not being as good as the top colas. Despite that I'm really happy with the outcome and I'm hoping ive got 30oz+ of real good quality nugs. All of the top colas have turned a gorgeous violet colour too which you can see on the pictures and I absolutely love. For my next grow I've gone with 6 fastbuds strains which hopefully will go under a scrog. Check back next week for the harvest and weigh in!
Likes
5
Share
@Smokwiri
Follow
Welcome to week 7 of my White Cheese by Zambeza seeds Looking good, nearing the finish, i think 2 weeks more When the soil gets dry a bit (flushed with calcium after some nute burn) i will feed the last round with green sensation and molasses.
Likes
31
Share
Start of week 3 - No nutrients. Might top this week. Day 18- Topped. Think I’ll wait until the new week till I post again.
Likes
98
Share
💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 28 and she's just killing💀it👌 👉We are in the Preflower stretch 👈 So Shit , I gave them just a tad to much nutes on the last feeding 👈 But I have since fixed it So I'm starting to pull her over and do some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 Changed To Bloom 8-20-30 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
5
Share
Closing thoughts. Damn easy plant to grow responds well to training have fairly uniformed plants only on kept the purple trait but that's ok we can selection breed for that. I am happy I decided to go this route with the breeding the girl scout diesel really complemented the mother plant
Likes
2
Share
@Shefman93
Follow
This is the last week of veg. Scrog the plant and took clones from the lower growth. It was transplanted the week prior so after 3 days of recovery from the lollipoping and shaping to fit the scrog. Literally had no issues the veg cycle.
Likes
22
Share
@Slobasian
Follow
Love every plant each one is growing differently stacking different even the visual difference of one strain growin two different ways combined smells of diesel, pez candy and lemons
Likes
79
Share
@Roberts
Follow
Alien OG Autoflower grew great, and finished beautifully. Strong smell, frosty, and sticky. She grew great under the Mars Hydro FC4800 light. It was my first time using the Gen 1:11 nutrients. I really like them, and will use again till I run out or get more. She will hang dry 24 hours then be put into the cannatrol for a 8 day cycle. I got a great grow to try it out the first time. 🤞. Thank you Aeque Genetics, Gen1:11, and Mars Hydro. 🤜🤛🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
4
Share
Super sticky frosty buds😬🔥👊🏻
Processing
Likes
1
Share
week 6 last vegetative week, due to tent size no pre flowers yet no thrips this week. leaves with 9 tips now 57cm height (+ pot) flowermind (4ml + 0.5g) LST + Defoliation + bending started putting some banana skin on a jar filled with water for flowering looking pretty, right?
Likes
2
Share
@3rnest
Follow
Die Pflanzen haben sich in der 2. Woche gut entwickelt und sind auf eine Höhe von 10-16cm gewachsen. Beim Öffnen des Zeltes kann man schon einen leichten Duft wahrnehmen.
Likes
4
Share
This thing has a great smell to it I can’t explain the smell best I can say is candy but like it’s a candy in a wrapper smell if you get me already sticky
Processing
Likes
7
Share
Début d une nouvelle expérience j espère que je vais réussir