#seedsman420growoff and #SeedsmanSeeds 📆 Week 10, 29 June - 5 July 2024 29 June - 5 July - Observed and let the plant grow. 📑 This past week was a bad week to try any updates on GD, there were too many bugs and crashes. So I decided to post today in hopes for better results. By all signs she continues to perform well and on a predictable schedule. Her smell profile is interesting and intense. I can only hope this carries into the taste as well. 🍶 nutrient solution not changed 🍽️ feeding schedule not updated 💧 Using reverse osmosis water with EC/TDS at 0 🔆 Light power at 75%, DLI 45 canopy coverage at 12hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.

Now it’s just a waiting game to watch theese beautiful flowers bud up🙌🏼💪

I received the clones from An out of province breeder. It reached me after three days of driving on the road with no light. Their future was not certain. I didn’t think I would need that many fans for the clones because they are so tiny, I figured they didn’t need that much maintenance. I was 100% wrong when I’m working with this many plants. I ended up getting mild mildew on top of the soil on the first week because there was barely any air circulation. At this point I didn’t have any Ventilation put up yet. And one fan on the floor. I ended up installing three fans in one room. No issues

Start of week 2flower buds forming nicely will update at end of week Updated 4th July 2020 really bouncing back after pH corrected

FOLLOW THE GROW———>https://youtu.be/SjZ-eizIP7o Growth has been steady and lush considering the fact that there has been a 2 week heat wave. For the plants in the bucket the 2 smaller ones are phenos of my previous Fanta Sea RBX grow, and the bigger one is a Sherb clone from my previous grow as well

Well what a week lol. Noticed brown spots and yellowing of leaves on lower branches, progressively got worse and higher up the plant. Repotted to a bigger 5 gallon fabric smart pot at the end of week prior to flushing plant. Added in some Dutch Treat soil. Finally got my digital pH and TDS meter. As I suspected, high ppm and low pH in the run off. Had to flush plant with 20L of 6.8 pH water over the weekend slowly. Suspected nutrient over feeding (1840ppm) causing low soil pH (5.34pH) and nutrient lockout. Got levels to 6.25pH and 814ppm. Carefully fluffed soil to help dry out faster. Reduced light to 80% to let plant recover over the next few days. Will start with just water at 6.8pH and resume feeding after at 50% depending how things look and ppm runoff readings. Overall the plant looks decent for all things considered and just got the SF-1000 grow light last week. Was just using 2 Amazon basic LEDs before from seed. Dozen or so node sites with new growth, FIM'D last week and now seeing 4 new nodes with new growth on top and FIM'd a few outer nodes on the branches that were ready. Hopefully with better monitoring of feeding and pH levels will be ready to flip to flower in a week or two. I want the plant to develop to good size before flowering. Starting with poor lighting and this week of Nutrient lock out has stunted growth speed, still good size for age, just need to correct lock out and low soil pH

4.21.25 3rd week of veg started today and the tie down method is starting to payoff! Hoping to get another week or 2 of veg get some more green growth we will see. Thanks for checking out grow have good week!

I added a C02 bag... hmm... probably not enough. Maybe time to look into a small tank system. I will likely flip to flower soon. All the plants get to play!

Strong growth within her first week. She got fed and the rains been watering her also…I am satisfied with her do it week progress

There we go, now the diary is all sorted out and the weeks are accurate. Pistils still poppin'! Starting to get the first few brown pistils to show up on the low low plant buds. Tops are still filling out. I might as well raise the dimmer to 10. It's been on 9 about 11 inches from the tops of the plants. I dialed it back to perhaps reduce the stress from the hot dose of nutes. They burnt up pretty good but still rocking! Hopefully the next run i can keep them pretty for the full crop! haha The Nutrient mix i listed is not a feed chart regiment. I've had to dial it back a bit because of the high ppm of my tap water which caused me to give them a hot 2500ppm feed one day and they freaked out lol. So now i test my ppm and i try to keep it around 1000, to 1250ppm MAX Next crop I plan on doing some experimenting. I'm going to grow 3 strains. I want to do a diary for each strain and I'm going to experiment with some different nutrients (Remo Nutrients) and I'm going to do side by side comparisons with Hygrozyme and HygroBen, as well as Resin by Green Planet Nutrients. Next Strains will be; #1 Female Seeds "Lemon Kush" (2 plants) Clones #2 Barney's Farm "Biscotti Mintz" (3 plants) Clones #3 Expert Seeds "Oreoz" (3 plants) Clones 1 of each plant will be treated with Mykos Fungi, Hygrozyme Enzymatic root enhancer, and HygroBen which is beneficial bacteria. So we can draw a side by side comparison of each treated vs. non treated plant to see if Resin really does increase resin output, and if the plants health, vigour and growth are affected in a significant way. These plants on Oct 31, are 42 days into their flowering cycle. I expect them to finish near end of November. Nov 15 i will cut clones off my mother's and prepare for the mid winter run.

Sorprendido por la noticia de mi primera colaboracion con MarsHydro 😊🙏 y muy sorprendido tambien por el envio de las semillas por parte de 420FastBuds. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos para esta aventura una carpa de 60x60x90, MarsHydro una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. Que decir de 420FastBuds, uno de los mejores bancos de semillas a nivel muendial. Si quieres una Auto de verdad, esta es tu cepa. Wedding Glue auto: Perfecta para concentrados. Una enorme cantidad de resina la hace ideal para aquellos que buscan los mayores rendimientos en extracciones. Auto súper productiva. ¡Esta variedad puede producir hasta 550gr/m2 en 70 días! ¡Entre las más fuertes del 2022! Una autofloreciente potente con un 26% de THC. Terpenos ideales para los golosos. Un delicioso sabor a vainilla dulce que te deja la boca agua. Perfectamente equilibrado. Un efecto bien equilibrado adecuado para uso diurno y nocturno. 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ 🌻 Wedding Glue Auto: https://2fast4buds.com/es/seeds/wedding-glue-auto Solo le aplique en la estapa de crecimiento agua con un PH6.5 y humus de lombriz. Octava semana de floracion. Es una planta que ha requirido mas nutrientes que el resto, se han formado los cogollos y han engordado como locos, se han cargado además hasta las hojas de resina. Comienzo a disminuir la cantidad de nutrientes. 📆 Día 71: Riego con nutrientes EC 850. 📆 Día 72: Descanso 📆 Día 73: Riego con agua + flawless finish. Comienza el lavado de raíces. Ha quedado una planta sorprendente. 📆 Día 74: Descanso 📆 Día 75: Riego con agua 📆 Día 76: Descanso 📆 Día 77: Riego con agua

Well I originally had this one entered into the solo cup contest but I had an unexpected event happen and left my plants unattended for almost 2 weeks so I transferred this one into a 2 gallon so I could see what this Breed strain could produce and despite the unplanned mishaps it came out stanky Danny and frosty ass ❄️ so today is going to be cut down this lil lady for the harvest

Dense nuggets, identical plants. Pretty easy to trim. Don't think this species is really fungus prone,small buds but very dense. Will update smoke report later. Need to cure now at least 4 weeks. Will post and update in september.

Week 9: Growth, Clones, and Preparing for Buds This week brought some important changes to the grow! The plants stretched significantly, taking advantage of the rainy weather, despite the temperature fluctuations. Overall, the conditions are supporting their development well. Notes: I made a few more clones, and so far, all of them are thriving. It's exciting to see a 100% survival rate for the clones so far. Out of the 12 plants, I identified three males. Two of them have started opening their pollen sacs, and I’ve begun collecting. The pollen is being stored in the freezer for future breeding projects. I did a light defoliation to improve light penetration to the lower branches, which should help promote even growth.

One week removed from the greenhouse. Plants are recovering from heat stress and 4 are flowering

10/20/24 #1 mainling is going good. plan to transplant to final 3 gallon pot soon. #5 seems the most hardy and lives anything thrown at her. dry environments. humid environment. shes happy all the time. i dont remember which number off the top of my head but it wouldve been the tallest plant. the only one that ive topped so far because she was stretching more than the rest. she has a strong pungent dank stank smell coming off of her already in veg. so thats something to note and i will definitely be keeping an eye on that. #4 has been transplanted into a 5 gal fab pot and placed into my flowerring tent. im probably going to start a separate diary for each pheno through flower because they will all probably be flowered at separate times. they may overlap but they will all be on different time tables because i have my plants on a cycling through the flower tent. not necessarily a planned out perpetual grow yet but similiar in the sense of plants being pulled down and new ones ready to go. 10/22 transplanted #1 into her final 3 gal pot. training is set now she just needs to grow bigger before 12/12 10/25 transplanted #5 into a 5 gal fabric pot. also she is already showing purpling on her leafs

Een geweldige strain. Ze ruikt heerlijk zoet. Ik heb haar in zijn geheel opgehangen. Ik denk zo ongeveer 10 dagen voordat ze droog is en ik de resultaten kan delen. Al met al een geweldige plant om te kweken met dikke toppen vol thc Stay