Plant is small or stunted hopefully it picks up. Plant is going through a stretch.

11éme semaine l'attante deviens longue mais faut tenir bon! bientôt la récolte. j'suis quand même heureux de pouvoir consommer La Rica en attendant la récolte du reste des plants qui ne debvrait plus trop tarder tous les plants on des trichromes laiteux maintenant j'attend 15/20% d'ambrés et bim RECOLTE! mardi 11/5 20h: Lampe éteinte pour 48h la récolte (des deux white widow, d'une purpleQueen et d'une dernière "La Rica" qui avait subit un stress qui a bloqué ça croissance de +/- 10j) démare le jeudi 13 mai à 20h😀.

Vamos familia novena semana de floración de estás Punch Pie de RoyalQueenSeeds . Que ganas tengo de ver el final de progreso de esta variedad, las plantas están sanas, se ven con buen color. La cantidad de agua cada 48h entre riegos, quitamos todos los nutrientes de la gama Agrobeta. Y entramos en la recta final, últimas semanas de floración ya, y como se están hinchando las flores. Estas próximas semanas veremos cómo acaban. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨.

First time grower, criticism will be well recieved😀 Two plant ebb and flow setup in a 3x3 as a test run Top feeding until I can afford the rest of my setup🙄 Started seed in water balanced to 6.0 Sat. Feb. 29th Tap roots within 12 hours, directly into pre soaked rockwool cubes. Broke the surface march 3rd. Began 1/4 strength micro, grow, bloom and stress relief Using very hard water for the next couple days, roughly 450 PM out of the tap. Ro system to be installed march 6th Ro system now installed. Start of week 1 will be Saturday the 7th of March. Day 2: Turned the light down to roughly 50%, instead of raising it, due to the fear of light burn. Will look into it soon. Plants seem to have recovered after I decreased the light intensity. Fan and filter purchased. Alternating flush and feed cycles 12 hours apart to keep salt sats down. Day 3: Bumped light intensity back up to roughly 75% of the ts1000's capability or 700 "light units" from a cheapy 3way meter. Adding as much co2 as I can through baking soda and dilute phosphoric acid. Day 4: Exhaust fan with climate control installed March 10th Day 5: Girls exploded now that I have my salt build up figured out . Day 6: Light back up to 100% Day 7:little droopy on the one plant, gonna let them dry out a day Setup should be complete for start of week 2.(actually sick right now and having trouble getting supplies) Still need a flood table setup.

Der Samen kam aus der Erde, und damit er sich nicht streched hab ich das licht etwas herunter gelassen. Die Luftfeuchtigkeit war bei 35%, dass habe ich aber wieder im griff da ich eine Sprühflasche habe und eine Kuppel über den Setzling hatte. Bewässern brauch ich kaum da die Pflanzen wenig Wasser brauchen. Da die TS600 bei 60% Leistung nicht allzu heiß wird es ist aber auch Winter. Montag habe ich meine Spuckpalme dazu gestellt da die vielleicht etwas die Luftfeuchtigkeit reguliert ich hab keine Ahnung ob das stimmt ich wills auch nicht googlen wird schon funktionieren und wenn nicht sprühe ich sowieso regelmäßig mit einer Sprühflasche. Die Spuckpalme sah mir sowieso zu traurig am Fenster aus. Die Temperaturen waren am Wochenende im Zelt sehr hoch Sonntag Nacht hatte ich 5 Stunden lang circa 30°C-32°C. Trotzdem haben beide Pflanzen es super bestanden. Ich habe zum Umtopfen nächste woche einen 8L Topf, Mykorhiza und Wurmhumus gekauft. Dazu noch den Biobizz Indoor Dünger.

7 Feb - Filled the reservoir with 1.5L each but looks like the water level thing doesn't work. Update: just watered with the Yucca extract to see how the plants react. Also accidentally broke a branch :( 10 Feb - Top dress tasty flowers + 1L water + yucca 11 Feb - Flipped to 12/12

Week 7: [16/12/20 - 22/12/20] [17/12/20]: Sprayed down all plants with Neem Oil as I started to have some Fungus Gnats which usually are not an issue but their numbers started increasing.

The 3rd week was a big one all plants finished stretch period and it was becoming a little wild for a second. I moved 4 of the bigger girls into their own room with their own 1000w LED plus a shared 250w HPS in the center. I will be tying down branches to get flat canopy then each of the 4 will be pushed more towards the center for better light coverage do not mind the setup its not fully there but will be finished before the end of the week. In the main grow room there is a single 1000w HPS cool tube running at 100%. To remove the 4 bigger plants I had to cut the entire trellis off the canopy but will be placing a new layer this week as well. As for nutrients feedings well clearly from the size of these girls you can tell they have been eating. In about 2 weeks I will defoliate one last time and then its them vs. the world til havest. Happy Growing!

10/06/2021 Harvesting #2 and #1 to prevent more loss to mould. #3 will tackle in morning. #2 hardest hit. #1 not much #3 less. Mould Weight will be added later as I have lost my scale in moving. On to curing for 3-4 weeks and I will update the smoke report

I’m very impressed with my first clone attempt doing good so far I will have to start some type of training not sure which way to go I will appreciate any Suggestions thanks

Well... week 3 these babies are really taking off.. I started all 4 on 1/8th dose of foxfarms.. all 4 taking about 20oz water each.

Otra vez familia, entrando en la recta final ya algunas de estas critical están cogiendo una pinta, lástima se subió la temperatura esta semana, seguimos abonando con agrobeta. Cepa bastante indica con floración rápida. . La humedad esta al 45% la temperatura está entre 21/27 grados , y como siempre el ph , ya que es de lo más importante,está en 5,8/6,0. . AgroBeta: 1 ml x L Flowering black line , vía radicular. 0,2 ml x L Beta shark, vía radicular. 0.5 gr x L mega PK , vía radicular. 0,8 ml x L Terminator, vía radicular. 0,5 gr x L Engordacogollos, vía radicular. 0,3 ml x L Tucán , vía radicular. 0,1 ml x L Betazyme, vía radicular. 0,3 ml x L Tricoma, vía radicular. 0,05 ml x L Gold Joker, vía radicular. 0,2 ml x L Silver, vía radicular. . Hasta aquí todo familia 🕸️ , un saludo y buenos humos fumetillas💨💨💨.

On the first day of this week, I topped the plants after the 5th node. 3 days later I switched to 12/12. The reservoir wasn't quite empty yet, so I didn't fill it this week, but I probably will at the start of the next one. Plants are growing quickly now, the yellowing in the BJ and NYC has also pretty much recovered, nutes seem to be fine at the moment. I fear they might grow taller than I'd like them to, but I guess we'll see. I just hope I don't have to put in the net this time, as I like to reserve the option of taking them out of the tent. I also bought an RO filter, which I am probably going to use the next time I fill the reservoir.

Que pasa familia, vamos con la sexta semana de floración de estas Gorilla Zkittlez Auto de FastBuds. La tierra que utilizamos que está en la publicación anterior es top crop all mix, aparte alimentamos nuestras plantas con Agrobeta. Por supuesto el ph se mide en cada riego y se mantiene en 6.2, regando cada 48/72 horas e intentando mantener la humedad un poco alta al principio. Se ven bien sanas tienen buen color , ya empiezan asomar aromas y el tamaño bueno no puedo quejarme, estas semanas vemos como maduran las flores. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨

Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 21/12/2019 - Fed her 1.5l of 6.4PH water with 0,5ml of each: Grow, Bloom and Max, and 1ml of each: Heaven, Alga-mic and Vera, noticed almost no run off, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale). Did some light pruning also.

7.9.24 I had to some major jungle patrol! Everything is going crazy! I was adjusting the plants around to maximise light exposure. One branch bent. FBP1, the branches are getting heavier. I had to add my last 2 stakes. I used duct tape and some imagination, tying with string, for the rest of it, too. I'm not going to be able to move them again, so tick, toc ladies! I added 3ltrs of dechlorinated water PH'd to 6.2, containing the following nutrients:- ♡1ml per litre of Ecothrive Flourish ♡2ml per litre of Xpert Nutrients Bloom Booster. ♡2ml per litre of cal-mag. After watering each pot with 3 litres in each, with the above nutrients. FBP3. She has again spilled out, run off. I might have mixed my soil, and used less perlight or coco. I've overwatered that plant twice now, fairly recently I'll only give her 2 litres in future. Continuing to give the others 3 litres. I've continued to defoliate. The leaf in the photo was the only one and it was like halfway up the plant. Not sure what it was, so if you know, tell me in a comment please! 8.9.24 Have not needed to adjust any ties. I watered each plant with 1ltr of dechlorinated water, PH'd to 6.2. With the following nutrients. ♡1ml of Ecothrive Flourish ♡2ml of Xpert Nutrients Bloom Booster ♡2ml of cal-mag I don't want to overwater, I also need to not let the soil dry enough to kill the microbes. I'll keep an eye on it, and adjust it as necessary. 8.9.24 I had to adjust ties and support for several branches. The fruits are getting heavier. I really hope they get done before anything breaks under the weight. I keep checking the trichomes daily through the jewellers loupe, each plant, and different bud sites. 9.9.24 Dijons birthday 💔 Ok, today another branch on FBP1, Branch wasn't snapped open, just fell under the weight. I tied it back up. I have some potash, which arrived today. I was going to top dress, however I've decided to cut all nutes now. I'm just watering with dechlorinated water PH'd to 5.8-6.0. "Final flush". I will continue this for next watering or so, then switch to straight RO water. Also I'm slowly lowering the temperature of the water, to about 70°F. When I see any amber, I will throw into the dark period for 48h. 10.9.24 After having my last question answered, I have decided to go ahead and call it a day on this grow. The plants had a final watering last night, with regular dechlorinated tap water PH'd to 6.0. This evening I have put all equipment inside the tent, like the dehumidifier, tower fan. I have split the stems, I mean why not? 😅 I will leave in the dark period for 48h then chop the whole grow, to dry together in the tent. FBP2 I am satisfied with the readiness. FBP1 and FBP3, are mostly glassy still but they need to come down too. I need to get it done and dried, if it's not the best smoke, it's my fault for being incompetent due to inexperience. I just don't want to risk messing up my FBP2, due to waiting on the others. So it is what it is I guess. We'll have to wait and see. This was quite possibly the worst time imaginable to do this run. I've had so much personal tragedy and upheaval, (of course we never know when these things will strike); combined with the unexpected conditions, including temperature and humidity throughout the grow. This being my FIRST grow of any plant at all, and these being autoflowers was particularly stressful. Fingers crossed that it works out in the end. All I'm concerned about now is drying in the closed conditions of the tent environment, and avoiding mould issues. The finish line is in sight. I'm so glad, now I can get back to my life. Will update, when I harvest! 🙂

Día 9 (10/06) N/A Día 10 (11/06) N/A Día 11 (12/06) Llueve mucho. Humedad alta por aquí. Eso les favorece Día 12 (13/06) Se empiezan a desarrollar las hojas verdaderas a una buena velocidad! Todo en marcha! 💨 Día 13 (14/06) Riego ligero 100 ml sólo H20 EC 0,5 en previsión del trasplante en el día 15 de la planta Día 14 (15/06) Se nota que estamos en el día 14 desde germinación y la mayoría de las plántulas van viento en popa! Día 15 (16/06) Hoy procedemos a trasplantar a las chicas a su maceta intermedia de 6,5 litros Se prepara con 5,5 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1 Litro de Insect Frass (15%) + 65 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 1L para que quede la forma perfecta de la maceta donde están las plántulas (ver fotos) Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la plántula de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae