Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #1 no runoff 7.15pm Lowered light 3cm #1 DLI= 26.8 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #1 no run Saturday 4/3/23 Day 39 5.00pm #1 Height= 28CM Dist= 40CM DLI= 25.3 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #1 no run #1 DLI=25.8 Lifted light #1 Height=29CM Dist=46CM DLI=21.0 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #1 Height=29CM Dist=46CM DLI=21.0 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #1 Wedding Cheesecake FF still hasn't started stretching so I'm thinking she is going to be a short and bushy. She is looking really healthy and I think she is spread out enough not to cause any problems with airflow. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.

June 22: planted peat pot in final Fast Buds 4 gallon bag after ripping bottom off and tearing sides. Forecast to be quite warm overnight so she’ll be outside tonight for first time. June 23: in direct sun but under shade cloth for today.

SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY This is my diary entry into the Dynomyco Show Us What You Got Contest! #DynomycoShowUsWhatYouGot! @DynomycoShowUsWhatYouGot! Big Shoutout to @Dynomyco for picking me in their contest. Happy to be involved and as a user of Dynomyco I am curious to see this side by side with my own eyes. I will be honest I am a little skeptical it will show any major differences. but we will see what happens. Some disclaimers, I am still using LABS serum I made as well as MIIM Miicrobial Mass. These are also beneficial to the root mass however they are bacteria based and not fungal or mycorrhizae like Dynomyco. https://growdiaries.com/giveaways/DYNOMYCO_Show_Us_What_You_Got I was going to use my own clones I made from the g13 labs grows I just finished but released I had used a Dynomyco in the medium when I was rooting them for a extra strong start. So to fix this little error I went out and purchased two Cherry Pie clones from a local grey market dispensary. I joked Dynomyco will cover the cost and yet to hear back from them lol. I have inoculated one clones rootball and the transplant medium with Dynomyco, the other clone and its medium got no Dynomyco. The Dynomyco Clone is on the left in photos, it's also the only pot with a mini glass thermometer. I did this exact thing in my Dr Seeds Granddaddy Purple Diary vs 60day wonder. I don't expect it to count as an entry but more of a 2nd side by side on two different strains. GDP vs 60DW. Hopefully I will get some stickers in my package and can label the pots as such. I used my own personal stash of Dynomyco as I have not been shipped the contest materials yet but the clones where good to go an I wanted to get this beast on the way. The plants will be grown outdoors and transplanted at min 2 times max 3 times. Nursery pot to 1Gal, "this weekly entry" 1Gal to 2Gal, "3-4 weeks away" and finally 2Gal to 3Gal maybe. "6-8 weeks away" This week 1 entry is the first transplant from nursery pot to 1Gal, I have sheltered them inside for the first few days as we got heavy rainfalls and I did not what that to be to much of a shock for them, they are in my Spider Farmer tent under 24/0 lighting with the SF1000 @60%, they should be good to make their way outside tomorrow if the weathers good. I have noticed I have a lot of outside light interference on my balcony with all the safety lights in the surrounding areas buildings. I am going to try and LST these plants to keep them low and below my balconies wall to avoid excess light pollution. about 3 feet high.

This week I cut a lot of foliage off. This way the lights can get to more buds. Weed inspires creativity.

📅 D119/D03 - 13/03/24 🚀 Drying 🎬 Added 22 pics and the timelapse of the harvest ________________________________ 📅 D120/D04 - 14/03/24 🚀 Drying ________________________________ 📅 D121/D05 - 15/03/24 🚀 Drying ________________________________ 📅 D122/D06 - 16/03/24 🚀 Drying. First trim : 3 g and a tiny flower placed in the jar for curing ________________________________ 📅 D123/D07 - 17/03/24 🚀 Drying ________________________________ 📅 D124/D08 - 18/03/24 🚀 Drying. I've made the very first try and she's very promising 😍😍😍 @Pure_Instinto_Seed_Bank ________________________________ 📅 D125/D09 - 19/03/24 🚀 Drying. Trimmed 7 grams and start curing of about 10 g for now. She's very sticky and very fragrant with an intense smell. Lot of rosin stucked to the scissor, good sign ! 😊 ________________________________ 📅 D126/D10 - 20/03/24 🚀 Drying. She's quite ready for trimming, I'll start tomorrow ________________________________ 📅 D127/D11 - 21/03/24 🚀 Drying. Trimmed 14 g from one of the main bud.... Less than expected but very dense, high quality buds ________________________________ 📅 D128/D12 - 22/03/24 🚀 Drying. Trimmed 11g ________________________________ 📅 D129/D13 - 23/03/24 🚀 Drying. Trimmed 22g ________________________________ 📅 D130/D14 - 24/03/24 🚀 Drying. Trimmed 11 g ________________________________ 📅 D131/D15 - 25/03/24 🚀 Drying. Trimmed 12 g ________________________________ 📅 D132/D16 - 26/03/24 🚀 Drying. Trimmed 16 g + 20 g + 16 g = 52 g. So far 132 g in total and 2 buds missing ________________________________ 📅 D133/C01 - 27/03/24 🚀 Trimmed last 15 g - Total outcome is 147 g. First day of curing

Weather here is still fantastic, hot days, partially cloudy, cooler nights. Long term forecast are excellent till the end of September, probably till mid October. No news to report, I'm just waiting for buds swelling, these are the slowest days of my life. I've got pheno #1, tall plant with short and dense buds, fast blossoming, good leaf/buds ratio, great resin production. The plant is gorgeous, all concentrated on the top, big, rough and fat buds. It is evident from the physiognomy typically indica that she is a rustic, wild plant and not an indoor doll. Flushing started, last feed Thursday 17th. Very strangely rust fungus infection has attacked only to fan leaves and hasn't hurt flowering, till now. She will be a generous yelder... and maybe she will cropped together with her sister Royal Gorilla in 7/10 days. Stay safe Bros

good flowering, everything is stable, a lot of inflorescences appeared this week, next week it is planned to remove the lower leaves. We had to tilt two branches from the middle, as they stretched out very much and there was a risk of burn, we are waiting for 7 weeks!

Hey friends! We are growing as hell!! The first week of 12/12 running nice and fast, at start of the week I've used to spray the leafs with CannaBioGen Delta 9 (4ml/l), also mount ScROG as much comfortable as I can :) Cheers! Grow for Love <3

Lots and lots of rain! Heavy clouds and no sunshine this week has been terrible. I found a few spots of mould on the girls so chopped a few buds away . Kept the good stuff to dry and bad stuff is going to be used to making hash! (I always keep trimmings in the freezer). Worried about watering them also as this will only encourage the mould 😕 next week will probably be the final week as I’m going to cut losses and chop em down. Lesson learned. Get a proper green house!!

Sponsored by: 🎭ZAMNESIA SEEDS🎭-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 28/7 has already recovered well after the cut, fantastic! 2/8 it reacted well to the cut and the cloning seems to have been successful. Thursday comes into bloom __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄Zamnesia boasts the most complete and accurate site where you can find everything related to cannabis and the "psychedelic" world. Autoflowering, feminized seeds, mushrooms, salvia divinorum, afrodisiacim of everything, and more! ( no affiliate link) ✅https://bit.ly/Zamnesiaseeds __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

******************************************** Week 3 Veg. ******************************************** Light cycle=18/6 Light Power=90w 37% Extractor controller settings High temp= Day 25c, Night 20c Low temp= c Temp step=0c High Rh= Day 63%, Night 68% Low Rh= % Rh step=0% Speed max=8 Speed min=1 Smart controller settings (during lights on). Lights on=4.00am Humidifier on=-55% Humidifier off=+59% Top fan on=+24.0c Top fan off=-23.5c Smart controller settings (during lights off). Lights off=10.00pm VPD aim=0.5-1.1 DLI aim=16-20 EC aim=0.2-1.4 PH aim=6.0-6.8 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 5 drippers. Feed=Veg Nutes. Neutralise=0.1ml/L Grow=2.0ml/L Roots=0.2ml/L Silicon=1.0ml/L Calmag=1.0ml/L Volume=8L Easy Ph down= 0.125ml/L Ec=1.4 PH=6.5/6.7 Runs=12 Run times=4min (260ml each) Gap times=16min Total runtime=48mins (3.12L each) Total flowrate= 130ml/min (65ml/min each) Auto start time=5.00am Auto stop time=8.44am 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** 📅2/6/24 Sunday (day 15) 📋 Hot today. Humidifier is in grow room now and not the tent. 📅3/6/24 Monday (day 16) 📋 H=11cm D=52cm Dli=18.6 Ppfd=287 📅4/6/24 Tuesday (day 17) 📋 Installed drip system. 📅5/6/24 Wednesday (day 18) 📋 I don't think this one got as much water. Topped ✂️ between 5th and 6th nodes at 8.30pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=nutes Volume=8L Ec=1.4 PH=6.5 Volume left=3.75L Volume used=4.25L Volume each=2.1L Runoff. Total runoff=0.7L Ec=6.3 PH=5.6 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 📅6/6/24 Thursday (day 19) 📋 📅7/6/24 Friday (day 20) 📋 📅8/6/24 Saturday (day 21) 📋 H=15cm D=48cm Dli=21.3 Ppfd=328 ******************************************** Weekly roundup. 📋 This is Fire, she's been topped between 5th and 6th nodes, recovering well from the topping and looking very healthy. The rate she has grown has really impressed me. Take it easy. Back soon. ********************************************

My girls are doing fabulous in their new tent. I'm so excited about this grow, man... 6/20: So I topped GDP2... she's just entering her 4th week. She's growing so much faster than GDP1 and BK at this point. I was having watering issues during this point with them 2. I'm thinking I am just going to top 2 more times and not LST. Honestly I just don't feel like adding another LST lololol 😅😆😆 6/23: So I learned that I accidentally fimmed Lil GDP2 when attempting to top. Had my question answered pretty quickly and he was very helpful. So instead of creating 2 new colas, looks like I created 3... #winning 😊😊 It's only been 3 days since I topped GDP2 and her 3 additional colas are already growing in really well.

Day 96, 15th of December 2020: Hi! A bit late I was on holiday I usually start the week with the first day but now with the last one. I just put a stick there was not necessarily but looks better with it... She is a haevy yielder girl.... the buds are thick so thick I am amazed.... This genetics is amazing as well.... All the structure is pretty much cool she is outstanding quality lady.... Solid... just grows nicely a bit strechy but nothing serious.... Almost done by Christmas she is. By the way I am going on holiday again and back on 28th of December so after harvest starts. She needs more time from now but it would not be an issue to be cut if needed. The 7th weeks starts with tomorrow 16th of December.... Only flushing and no more nutritient will be used. Soon full report comes. Lamp is the same 11 hours on and 13 off.... The last 4 days she will get 4 days darkness and only ventilation will be working no even more water ;)

420 Fastbuds FBT2306 Week 5 These two have gone into flower absolutely amazing. The flower sites are showing up beautifully. Over all haven't done much on these besides giving another defoliation and lollipoped them taking off the lower nodes. Should allow them plenty of light through flower and air to prevent moisture build up at pot level. All in all Happy Growing

Se hizo LST y quebré una por la mitad, pondré cinta con un palito de soporte a su alrededor para que solde.. - Luz: Bestva Pro 1000W / 18 h/d -FloraNova Grow G.Hydroponics: 0.6ml/l - Armour SI G. Hydroponics 0.4ml/ - Rhizotonic Canna : 4 ml/l - Everest: 0.5 ml/l Control biológico: -Solution (bioinsecticida generalista: Beauveria, Metarhizium, Lecanicillium y Cladosporium + esencia de ajo y chile). -Acaridox (bioacaricida: Metarhizium e Hirsutella + esencia de canela) - Scamin (control escama y cochinilla) Cladosporium Herbarum

QUESTION TO EVERYONE READING THIS: My tap water is pH 8.3 (yes I know right ?!) Adding the BioBizz nutes brings it down to pH 6.2 - 6.4 depending on the amount which is great. Now, I dont really care about runoff pH that much, doesnt tell me a lot imo but I measured it twice, last time it was 6.8 this time it was 7.1. Is there anything to worry about or is that just irrelevant? Thank you guys :) Day 48: Watered the G13 Haze with 650ml Water and 2.8ml / l BioGrow, 2.8ml / l BioBloom, 0.7ml / l TopMax which is the equivalent biobizz week 7 feeding schedule with 70% strength on BioGrow & TopMax and 90% strength on the Bloom. Therefore, dont mind the leaves hanging down, I just watered before taking pictures. Also redone some of the LST by changing the "angles" of the side branches to use up space more evenly. Tied down a bit more aswell to even out height differences. Looks great so far, but the G13 Haze is quite a bit behind in budding, the Liberty Haze is throwing Pistils everywhere, the G13 Haze just started showing the first noticeable preflowers with pistils on the nodes. Day 45: I really wanted to try serious and "professional" training methods. Defoliation was obviously needed, I couldnt even see what was going on below the plant. Removed all leaves except on the top 2-3 nodes of each branch. Then I did some heavy LST to move the side branches to the outside for filling up space. I hope the center will grow some branches at some point. MOST IMPORTANTLY, since I wanted the main branch to slow down growth a bit, I twisted and "mashed" it between two fingers until I could hear a snapping noise and the stem became weak like gummy. It takes a lot of courage guy! A LOT. But it seems to have worked, the stem is not broken and I managed to tie it down without bending the whole plant. I am so excited on how this is going to turn out. ~Watered 600ml today Day 44: So yeah, definitely stretching ! The internodal space is way bigger than I'm used to from growing short indica quick ones. Funnily enough, the G13 Haze does'nt give off any smell at all apart from typical "green plant" smell (Just noted that because the Liberty Haze smells quite strong even though it doesnt form buds yet). Did some very very careful LST which looks good for now. I want to remove a lot of leaves and little side branching from the bottom as soon as the plant grows a bit bigger so I can access the bottom part better.

* FastBuds Cherry Cola Auto - 10/08 - Week 2 Veg* Coming into week 2 Veg thus far all is moving accordingly - Lite water feeds - Frequent Lite Nute Feeding has started

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flower Day 65 since time change to 12/12 hrs. Hey everyone 😀. We arrived last week. Unfortunately, I'll be harvesting the lady a few days earlier than planned since it started a little on the top 2 buds to mold :-( Very annoying with these genetics. It was also one of the few who wasn't a cuttling :-(. The harvest update is coming in the coming days. Until then, I wish you a lot of fun and all the best :-) You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .