Likes
Comments
Share
week three flower everything looks fine so far :D eight days after defoliation I water them with 1.5l every 48h the light I use was set to 80% and it hangs 80cm away from the tops
Likes
57
Share
W12 - ESTHER 🌱is growing well. Days become longer with more hours of sunlight ☀️ Still can't spot any signs of flowering 🌻 in her 😥🤦‍♂️ I started to defoliate branches from unnecessary leaves. Regularly make some tea 🍵 from them with a dash of virgin olive oil. I need to admit makes me very mellow and tastes delish 😋
Likes
9
Share
@MG2009
Follow
12/16/2021 Recovery is a success! A little raggedy but putting on decent growth in last couple day's. Also need to decide if I top or mainline the two tops? Going to feed her today and see how she grows this week then decide what action is appropriate. She actually has 4 tops! Three are more developed but if you look closely there is 4. I kind of want to let it grow, although it may cause a split later on😕 . So still thinking on it.
Likes
18
Share
Gracias al equipo de Fast Buds, XpertNutrients y Marshydro, sin ellos esto no seria posible. 💐🍁 Gorilla Melon: La Gorilla Melon crece más hacia fuera que hacia arriba, lo que resulta en una planta tupida y manejable. Produce cogollos pequeños, sólidos como rocas y muy pegajosos, que envolverán sus ramas al final del ciclo de cultivo. Esta variedad desarrolla muchas colas, así que no te preocupes por el rendimiento: te cubrirá con un suministro de flores agridulces de primera calidad. Al fumarla, mostrará sus terpenos de melón, heredados de nuestra cepa keeper cut of Melon, con los toques de un sabor clásico heredado de GG#4 (Murdock GG Strains). Otra cosa que hereda de sus padres es su fuerza de gorila, que le permite resistir a cualquier tipo de estrés. Puedes hacer toda la defoliación que consideres necesaria, o coger todos los clones que quieras, y verás cómo se recupera casi instantáneamente y vuelve más fuerte que antes. 🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/gorilla-melon 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 13: Por fin ha llegado el momento del lavabo de raices, los cogollos estan muy compactos y llenos de resina, una de las plantas ha tomado unos tonos morados preciosos .
Likes
82
Share
Hello growmies! Welcome to week four of An Epsilon Adventure! The girls are already transitioning into flower, I will get some photos of that later in the week. Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow. Daily Updates: ### Week 4 Day 1 11:00 16/7 Removed some lower growth. ### Week 4 Day 2 23:00 17/7 Tallest plants were showing signs of heat stress so I have raised the light about 30cm more. Unfortunately this now means the lower plants aren't getting as much light as they could, so I have put the cycle back to 20h (I may even increase it). ### Week 4 Day 3 14:00 18/7 Photographed. ### Week 4 Day 3 19:00 18/7 Fertigated 2l. Okay these girls are now starting to concern me a little on the basis that they are supposed to grow to "50-70cm". At just over 3 weeks old the shortest of these girls is 53cm, the tallest (plant 3) is now 76cm tall. The worrying thing is they do not at all look like they are slowing down and as they are just pre-flowering now, the flowering stretch hasn't even started. So I need some genuine advice here now: Do I keep the faith and hope that they don't exceed the space I have? Do I top or super crop them now? These ladies are beastly, at the end of the week I am going to take some individual videos and more photos to really try and capture how magnificently well these girls are doing. I think I may be in the process of growing the biggest Epsilon F1's so far? Exciting to find out! ### Week 4 Day 4 21:00 19/7 James has assured me they wont go much more than 85 so I am not going to mess with them. They are due a defoliation at the end of this week though. Measured each plant as follows: Plant 1: 81cm Plant 2: 75cm Plant 3: 80cm Plant 4: 67cm Plant 5: 59cm Plant 6: 58cm Might photograph later or leave until tomorrow. ### Week 4 Day 5 10:00 20/7 Photographed and measured. Plant 1: 85cm Plant 2: 79cm Plant 3: 81cm Plant 4: 71cm Plant 5: 63cm Plant 6: 63cm So they've all grown about 4cm in about 13 hours, except plant 3 - which seems to have slowed down a lot. The top of plant 3 is also the most advanced looking in terms of pistils. I forgot to take close ups of the preflowers I will do that tomorrow. I have had to raise the light again today and it is now much further away than the younger plants than I would like. So I am thinking about adding a 300w LED into my 4x4. I have another 3 inches I can raise the light on the hangers, after that I can removed the adjustable handers and tie it to the top of the tent... that'll gain me another 4 or 5 inches. If I need to go higher my only option would be to set them up without the tent which is not an option right now. Hopefully they all just stop getting taller now and focus on flowering... but my gut tells me there's more growth to come. Watch this space! ### Week 4 Day 6 15:00 21/7 Measured. Average 10cm growth 29 hours. 😳😳😲 Plant 1: 96cm Plant 2: 89cm Plant 3: 88cm Plant 4: 81cm Plant 5: 73cm Plant 6: 72cm ### Week 4 Day 6 23:00 21/7 Defoliated. Only photographed plants 1 and 2 individually as I was short on time. Some lovely pics though! ### Week 4 Day 7 15:00 22/7 Fertigated. 2l Will photograph and measure later when they've had 24h since training. ### Week 4 Day 7 23:00 22/7 Photographed and measured: Plant 1: 102cm Plant 2: 93cm Plant 3: 89cm Plant 4: 85cm Plant 5: 76cm Plant 6: 75cm Well here we are at the end of week 4 and I am quite shocked by the growth of these girls. This strain averages 50-70cm in height. We have six plants here and every one of them is taller than the average... but would you just look at plant 1? She is a giant! 102cm!! Where will she stop? Next week will see the full transition to flower and we will start to see the bud sites developing. I have no idea at this point what the heights will look like at the end of next week. This is sort of new territory really, they weren't meant to get this big! --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========
Likes
36
Share
@nonick123
Follow
Día 129 (07/10) Riego con 750 / 1.000 ml H2O de osmosis Empiezan a moderarse las temperaturas con 28 ºC de máxima Día 130 (08/10) Riego con 500 / 1.000 ml H2O de ósmosis Las temperaturas están sobre 25 °C Día 131 (09/10) Riego con 500 / 750 ml H2O de ósmosis OnionOG #1 empieza a mostrar signos de que está en la fase final de floración! Día 132 (10/10) Riego con 750 / 1,250 ml H2O de ósmosis He revisado los tricomas de todas las plantas y OnionOG #1 está casi a punto! Estamos a solo 2 días de la ventana de cosecha según el banco 😍💥💨😁 Día 133 (11/10) Riego con 750 / 1,250 ml H2O de ósmosis Día 134 (12/10) Riego con 500 / 1.000 ml H2O de ósmosis Día 135 (13/10) Riego con 1 litro H2O pH 6,5 + Kelp Hidrolizado 0,3 g/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
10
Share
Hey everyone, day 21 today. She has started to grow a little faster but still small, hoping to get another week of veg to get some growth before flower.
Likes
15
Share
We added a 300w unit farm light for the girls hopefully they don't get to upset in the shift.
Likes
24
Share
@Rit031
Follow
This week still raining......... Fertilizer this week 1) Monopotassium phosphate (KH2PO4) 45.7 grams with 500 ml of water + Mono-ammonium phosphate (NH4H2PO4) 45 grams with 500 ml of water. Mix both together and use only 5 ml per liter of water. 2) General root stimulants 1 ml per liter of water. 3) 4 eggs mixed with 1 tablespoon brown sugar + 4 tablespoons curd. Mix together.then lived it for 1week .Then used 2.5 ml per 1 liter of water. 4) Calcium nitrate {Ca (NO3) 2} 3.5 grams, mixed with 1 liter of water, set aside. Prepare a mixture of 3.5 grams of magnesium sulfate and 3.5 grams of boric acid mixed in 1 liter of water. Then mix all 2 liters of liquid The ratio used to put plants is 3-5 ml per 1 liter of water. 5) EDTA chelate 1 ml per 1 liter of water. 6) 0.5 grams of amino acids per 1 liter of water. 7) Bat manure.
Likes
24
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Das wird die letzte Woche für sie . Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
44
Share
So this week i harvested the orangesherbert so sticky and stinks of orange, 50grams dry of 🔥 bud. Curing in a big jar at 21 degrees and humidity of 60% dark cool cupboard. Watermelon zkitles is bouncing back, the runts is doing amazing with the lst and leaf tucking. I had to kill the purplelemonade due to it herming on me I dont have space for that so I'm going to run a ethos genetics seed in its place.
Likes
Comments
Share
Good 😍🔥🔥
Likes
17
Share
Day 16 week 3 of flowering. Wow this girl has really stretched!!! She is up against the light & I can't raise the light anymore as the fan & filter is above the light up against the roof. Had to super crop the tallest branch & have tried to open her up some more with some serious bending & tying down carefully as the stems split pretty easily. Defoliated her & some more lolliepoping, she is going to grow some really nice big buds 👍
Likes
15
Share
@Uwish
Follow
we continue the run with the slowing down of the stretch and the beginning of the beautiful flowers. This week my EC indicated me some things... It was at 1.8 and went up to 1.9, so I added water to lower the ec to 1.6. When my ec goes back up it tells me that I have enough nutrients in my solution. Now, the ph is back to 1.7, I will add more water to bring it down to 1.5. We can observe on some leaf tips a beginning of over-fattening, this is what I'm talking about above, I'll let you know next week if I lower the ec or if I keep 1.5. I did one last defoliation and it was needed! If you look at my vitals, it's not crazy, 70% humidity at this time of the year can become problematic, so I'm going to take the dehumidifier out and set myself at 55%.
Likes
16
Share
😍 look at the ridges on the leaves. Each ridge so distinct and healthy looking i love it. We are about 10 days into flower now and just starting to see the lady parts coming out. The folair and root microbes seem to be making a difference, she is growing very quickly. Hope to have some flowers forming for the next update!
Likes
283
Share
D35 - The first day in the fifth week of veg for #2 and the fourth for #1. I gave both girls around 1.2-liters of water @ pH 6.3. I topped the second girl for the second time today, six days after her first topping, and I will top the first girl for the first time tomorrow. I also removed the large fan leaves from her fourth node as they have served their purpose. D36 - Today, it was time to top the first girl for the first time. Exactly one week after the second girl. She had grown a lot in four weeks to a height of 33 cm and a massive 50 cm wide, looking luscious and very healthy. I topped her the same way as the second girl, just above the fourth node, and removed everything below it. I stripped her down to the bare essentials and honestly felt a bit bad for doing that to her. I didn't keep any clones this time, as I still have the clones from the second girl. I might take a cut from her later, though, considering how vigorous she grew. Finally, I gave her around 1.5-liters of water @ pH 6.5. D40 - The first girl has recovered well from her abuse a few days ago, and I should be able to top her again in a couple of days. The second girl is still a few days out from her third topping. D41 - The end of the fourth week of veg for the first girl and the fifth week for the second girl. Sorry about the porno-light pics. I was a bit late, and my lights had already gone into sunset mode.
Likes
10
Share
Week 9 has finished, she is pretty close to chop 👍🏾