After putting my timer wrong at 24h, I adjusted it to 18h to match the photoperiod plant. Heavy defoliation helps them breathe a bit. Focus on main branches

FBT 2401 is starting to stack. She is not gonna get really big due to my errors. I will get a nice sample of the flower for sure. Everything is looking good now. Thank you Medic Grow, Athena, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

Week 8 Flower Flush flush flush 💦💦 Fading and fattening up, she's looking very frosty and smelling as beaut as ever. I like to pluck a few of her biggest, greenest leaves throughout flush as it'll speed up her fade and flush her quicker by taking away stored nutrients. Looking forward to watching her fade! Thanks for following and happy growing! 🐺

Pronto per la fioritura😈😈😈

This plant looks so beautiful! I'm glad to see that both phenos of the big jeff look very similar and have the exact same shape of the leaves, that's a good signal, let's see how this lady keeps developing!! 💓💚💛👨‍🌾

Buenas chicos, llego la 4ta semana y como sabrán, las nenas estan muy saludables, las colas comienzan a notarse mas y el engorde va optimo, seguimos aplicando co2 a 1400 ppm y se aumento la ec a 3.0, las luces suplementarias de IR, UV Y DEEP RED estan haciendo su trabajo, ya veremos que tal termina todo.

Hello Canna Fam, So week 11 has come to end and the ladies are smelling great! I did a partial harvest to the Gorilla Cookies, LSD-25 and the Girl Scout Cookies as the trichomes were ready to the top half of the buds. I raised the pots slightly and will leave the rest of the buds to mature a bit more before I do the final harvest. I must say the trichome product on these FastBuds is just amazing! Great genetics 🔥 I hope you enjoy the diary entry and happy growing to you all✌️🏼

Harvest week for Auto Mintz arrived around week 14-15, with the two plants hitting about 90 cm and sporting sticky buds. The air carried a sharp, minty scent, and the trichomes had turned mostly milky with a few amber flecks – time to cut. Watering stopped a couple of days before, and on harvest day, the buds were trimmed carefully, yielding a modest but satisfying 140 grams dry from both plants. They dried over a week in a dark, ventilated spot at 20-22°C and 45-50% humidity, keeping their fresh aroma. It was a straightforward process with a decent outcome for the effort.

Hi all, sorry for the delay, all continues to go very well, she is handling the nutrients very well wit only a very little tip burn. I increased the light a little bit, as I felt that some of the main colas on the side didn't get enough light. Next week I will probably be able to show the little veg-box I built, since the cuttings are slowly outgrowing their current home.

They picking up growth now and transitioning to flower

Fed compost tea with added Bio Pk on Wednesday, plain water all following feedings. Not really having to do much with her at the moment, occasionally defoliate to let some light and air in at blocked sites. She is swelling nicely. She seems to be growing well without any issues.

Week 9 / pictures at 63 days old. So everything has been pretty much the same as last week. No vertical growth but everything looking fatter and frostier! Still soaking up lots of water - 1.5litres every other day with 3ml of bloom nutrients in each. Removed a fair few leaves today - the unhealthy old ones from round the bottom and the ones getting in the way and touching the buds. Purple skunk buds still looking fatter than sticky orange. Sticky orange pistils started turning orange last week so I think she is going to be ready first but with a smaller yield. Purple skunk pistils have started turning orange today. Temperatures are higher this week and have reached 30 in the tent but spring is here so temps in general are higher outside. Was hoping it would stay lower as I really wanted the purple skunk buds to turn purple! They apparently prefer it cold before the purple comes out. But we’ll see what next week brings. I feel like we’re on the home stretch now. Each week gets more and more exciting and I just want them to get FAT! Again, pictures and videos just don’t do them justice - they look so much better in the flesh!

On the 15/10 it was my fifth day in a row without any more signs of pollensacks or nanas! It really is worth the try is you think, you got something special on your hands. If you can, better isolate it anyways, I just didn't have the room for this. Everything else also going great and the Double Dunked is starting to show why this run is called "Purple Beauties". From now on every week was going to blow my mind on just how beautiful this grow could turn out. Also did some defoliation again

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

plant is finally showing signs of recovery from the PH issue, and as a result is showing some signs of deficiency and new growth is showing signs of recovery. Soil is showing good signs of microbe activity. However this plant is not acting like the other one at all. The thunderfuck seemed to not like the intense light either also seems to be a delicate when in a heavy feed situation. Oh well, the reason why we do experiments.

Got some Nute burn my fault, caught it to late thought it was something else but do beleieve it was Nute burn. The high ppfd didn’t help either. They all bolted and are now flowering beautifully.