Likes
Comments
Share
👉Well this was a great grow , she was definitely a big girl , really enjoyed it 👍 As to the smoke report , she's very sweet with earthy notes , I like it alot , she's not bad at all , medium potency,definitely a hard indica 👈 Soil by Promix Nutrients by Cronks Lights by MarsHydro & Vivosun Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈
Likes
16
Share
@DonKrika
Follow
Plants growing extremely well, the only problem I think I'm having is too many nutrients. Plant A is showing some strange signs. a few big fan leaves are becoming "crispy" I can see a bit of nutrient burn, but a minimal amount I finally set up the drip system this week. I started LST this week, I bent both plants pretty hard, they are almost parallel to the soil. On plant A I did super cropping by mistake, I was tieing a branch and I put too much force on the bend, but palnt didn't seem afected at all by this. DAY 29 - Nutes PH - 5.96 Solution Temp - 21.5 PPM-1600 Watering Volume per plant - 4L DAY 32 - Water PH - 6 Solution Temp - 21.2 PPM-560 Watering Volume per plant - 4L Next week I will add the second ligh to the tent
Likes
Comments
Share
Likes
5
Share
@PhatRobs
Follow
Forgot to update last week. Have multiple dairies going at once. I love running pyramid Seeds genetics, never once have i been let down! Week 4 the end of last day, and growth this last 7-10 days has been HUGE to say the least.
Likes
3
Share
@CreoWeed
Follow
Hey guys, We are getting very close to the harvest, I would say one more week and I'll be ready to cut her down. Smell start to pungent and I love it! Buds are pretty compact but relatively small. I can see by the end of the week most of leaves are turning yellow, sign that the plant its releasing the last energies. Trichomes are mostly cloudy and for now there's no sign of ambers one. I'll keep you guys posted with the harvest week. Stay tuned, stay high!
Likes
26
Share
Bewässerung: 2500 ml jeden 3 Tag in der vierzehnten Woche pH-Wert: 6.3 EC-Wert: 1,6 mS/cm Temperatur: 28ºC Luftfeuchtigkeit: 50% Schädlingsbekämpfung: Wir haben seit ein paar Tagen die Nematoden in der Erde und es sind schon deutlich weniger Trauermücken unterwegs. PPFD: 600 µmol/m²/s DLI: 38 mol/m²/Tag Düngemittel: Sie bekommt ab jetzt nur noch Wasser. Besonderheiten: Müssen jeden Tag Gießen durch die hohen Temperaturen. -Tag 92 Heute wieder Wasser bekommen, Dünger bekommts ja keinen mehr -Tag 93 Heute haben wir ihre Trichome Kontrolliert sie sehen schon sehr Milchig aus. -Tag 97 Heute wieder Wasser gegeben, sie hat so ca. 75 bis 80% der Trichome Milchig, sie wird nächste Woche geerntet.
Likes
Comments
Share
Vamos familia, actualizamos la primera semana de floración de estas Fruit cake de Seedstockers, salieron las 3 de 3, 100% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de crecimiento. La tierra utilizada es al mix top crop, por cambiar. De 3 ejemplares seleccioné los 2 mejores para completar el indoor, también cambié el fotoperiodo a 12/12 y apliqué una buena poda de bajos, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen ritmo por el momento, también marcaron las preflores. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂
Likes
2
Share
Likes
260
Share
🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴 So here we are! (sniff) ❤️ That was a fun grow! 🐒 🐒 Maybe interesting to mention that my light was running on 75% the whole time. 💡 Fun fact: the Monkey that was standing directly under the lights produced 2/3 of the whole harvest while (logically) the monkey on the side only produced half the amount of her sister's! WOW! 😬 Thanks everybody who jumped on the monkey train with me UHUH UH!! 🙏 😘 This variety is great, just get a good carbon filter, growmies! 😜 Thanks, my growmies for visiting and reading and commenting, I love reading your comments! Mwah! 😘 Thank you, @Kannabia, for sponsoring this grow, aaaaand for the amazing gift pack! 😍 I hope to make you proud! 🧡 Special shouts out to my fantastic sponsor @GreenBuzzNutrients! Thank you for trusting me with your awesome products, I'm a longtime fan! 💚 🙏 Green + juicy growmie hugs to my Greenbuzzers!! 😘 Get a generous discount code for their products in my set up section ⬇️ !! Grower Love everybody!!!11 💚 💚💚💚💚💚💚💚 Wishes do come true, they just take a lot of time sometimes.. ✨ __________________________________________________________________ https://www.kannabia.com/en/feminized-cannabis-seeds/monkey-grease Monkey Grease Its own personality At Kannabia Seeds we have put all our effort into bringing out our own feminized Monkey Grease, a cross between Monkey Grease x White Widow, focusing above all on giving it its own personality in flavor and aroma (frankly unmistakable) and, of course, in Highly demanded characteristics, such as high resistance to diseases and pests, and adaptability to all types of growing conditions, making it close and easy to grow to the widest possible range of growers. The result is a really powerful and versatile indica-sativa marijuana seed, with a powerful relaxing effect, ideal for those moments when you want to disconnect from the madding crowd. Cultivation of Monkey Grease Which cultivation method would be most appropriate for this variety? Good question… and one that is easy to answer. Its versatility and adaptability make it a true all-rounder, with remarkably uniform results, whether you choose SOG, SCROG, hydroponics or guerrilla growing. Moreover, we invite you to experiment and play, varying the techniques from moment to moment, and to draw your own conclusions. We are convinced that in all cases, apart from minor variations, the results will always be optimal, giving remarkable yields and in a short time. Attention should be paid to its high bud production, which can be fat, dense and heavy, although its sturdy branches are able to bear heavy loads without major problems. If you are a fan of extractions, our Monkey Grease is also optimal, given its high production of caramelised resin. If it is already amazingly productive indoors, this variety excels on its own merits outdoors, where it can easily reach 200 cm in height, and can reach between 700 and 800 grams per plant. It is therefore an easy and grateful plant, which demands little from its gardeners, making do with simple basic care, and with little or no propensity to develop diseases or mildew, or to attract pests (despite its striking aroma!). Taste and effect of Monkey Grease Our Monkey Grease stands out first and foremost because of its powerful, strong smell, which is hard to camouflage. A penetrating aroma that unfolds, in a balanced way, on the palate in the form of a wide range of spicy and sweet flavours, reminiscent of wild honey, nougat and cinnamon, and distant notes of milk chocolate. A delicious treat to be savoured calmly, without haste, as a preamble to its pleasant effect: extremely relaxing and narcotic, powerful, ideal for meditation and moments of introspection and meditation. Don’t be in a hurry with Monkey Grease. It can be your perfect ally to treat those stress and anxiety problems, but for that you must let yourself go, surrender to its charms, especially if you are inexperienced. ________________________________________________________ Setup: 140x70x200 cm Spiderfarmer tent 2x Monkey 16W fans (not oscillating) 1x box fan 50W oscillating (on lowest level) LED Full Spectrum 320W AGLEX AGL-320W-MA 5,6 kg foldable, dimmable 864 pieces Samsung LH301H 864umol/s 2,7umol/J full spectrum white + RED 660nm + IR 740nm wavelength range 380-780nm covering 3x4ft Green Buzz Nutrients https://greenbuzzliquids.com/ ❗ Use code GD42025 for generous 25% discount (for orders of minimum 75€) 💚 Plagron Growmix Can Lite Filter 125/ 400cm³/h PrimaKlima exhaust EC 125-400/240 cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow + Bloom to pH 6.2 💧 🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴🐒 🍌 🌴
Likes
15
Share
Harvest Day. Airpot has dried out nicely. Trichomes are perfect and smell is glorious. Large leaf and fan leaf removal prior to whole plant chop and then hang for a low/slow 7-10 day dry before final 2nd (dry) trim and jarring. Will post a 'harvest' week to finish off this lovely, resilient plant once I have dry weights. Thanks to all who viewed and supported, your encouragement and knowledge never fails to help. 👍
Likes
7
Share
Likes
4
Share
@UrbanBoer
Follow
Hands down she has raced to be the first plant that will be harvested, which I do not mind because this cheese scent she has is driving me crazy, my senses are drooling 🤤 and crying, patience is a skill reserved for the brave. Love how the LST has given me about 3 main stems, the crystallisation on this plant is incredible, it looks like I am growing it in an indoor environment. All she’s doing is fattening her buds, I hope she gives about 50grams of dry bud. I need to start formulating a questionnaire, I am going to dedicate 10grams to researching how well I grow bud, that is six strains, 10grams each, that is about 60 joints weighing a gram each. At the end I want to open my own community weed forum.
Processing
Likes
8
Share
@U2malone
Follow
Still not flowering but she’s gaining height , by the end of next week if no signs of flowering I will accept that she is a photo plant . I am more confident she is a female 🤞🏽. Finding this seed has got me well into it now. Thanks to all you guys , you have given me plenty of info ,have got another two plants started which I will start a journal for soon . Feel like I’m a member of this great community now , one way to keep busy at these trying times . Happy growing everyone 💪🏽👍🏽
Likes
16
Share
9ª Settimana di Fioritura 💐💐💐💐💐💐💐💐💐 Oh my god 🙏🏼 Buongiorno amici 💚, avete visto che razza di fiori ha buttato la signorina MIMOSA Shot 🌼🎇 di HERBIES SEEDS?? Fantastica pianta davvero 🔝🤩😋
Likes
14
Share
Getting spotting and burnt tips on the leaves, no idea why. The nutrient amount was 2ml/gal of Micro and Grow with 1ml/gal of RapidStart during the week before. Changed water on Nov 13th, FIM'd Nov 12th but it looks like I may have just topped it. Nov 14th - pH 6.1 -> 5.8 - PPM 480, 1.0 EC - Temp 75f, Humidity 50% Nov 15th - pH 5.6 (?) - PPM 460, 0.9 EC - Temp 71f, Humidity 65% Nov 16th - pH 5.8 - PPM 450, 0.9 EC - Temp 75f, Humidity 60% Nov 17th - pH 5.7 - PPM 440, 0.9 EC - Temp 75, Humidity 60% Nov 18th - pH 5.9 - PPM 430, 0.9 EC - Temp 80f, Humidity 60% Nov 19th - pH 6.0 - PPM 500, 1.0 EC - Temp 65, Humidity 70% - Added CalMag on the evening of the 18th Nov 20th - pH 6.0 - PPM 490, 1.0 EC - Temp 75, Humidity 50%
Processing
Likes
29
Share
Hey guys it’s week three and I’m feeling great. I ran into a few issues: 1. Unexpected rise in humidity. Don’t really know why it spiked but I purchased a dehumidifier to combat the issue. 2. White powdery Mold on the side of my grow fabric pots. I believe this was a byproduct of my humidity issue. I heavy inspected each plant and from the surface everything appears to be ok. I whipped away the mold and spray it down with a solution I made from mouth wash and water prior to the girls going to sleep. I also added another fan to add more circulation. 3. I took a few photos of some of my leaves there looks to be some discoloration hard to tell what it is due to me being color blind, I believe this is due to nutrition burn. All please take a look and tell me what you think it is, is it one problem or multiple? Other than that I started LST, great start so far I believe!
Likes
11
Share
@Lazuli
Follow
Very nice plant i love this strain already
Processing
Likes
10
Share
@mkrmkr
Follow
Completing the twelfth week. Plant 1 - Completing the twelfth week of life. Plant 2 - Completing the Eleventh week of life. Plant 3 - Completing the Eleventh week of life. Plant 4 - Completing the tenth week of life. Completing the first week of flowering, I hope to know soon if they are females. KeepGrowing.......!