.

Eccoci qui... Ormai manca davvero poco ci siamo quasi.... Ora niente più fertilizzanti solo acqua ed attendiamo la maturazione.. Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️

So this week I saw some decent bud development! There are a couple of colas with tips a little too close to the light, but they aren't getting super high PAR measurements so I think they're good. I added PK 13/14 this week, so I wanted to see some interesting changes. Not as much as I thought, but some flowers are noticeably much fatter than a few days ago. Had an issue with the top layer of my coco getting dry which I realised to be from the 15L dehumidifier I had in there, right next to my pot 😳 So that's now on full power in the room outside of the tent. The heat can be a bit of an issue, reaching 27-28c briefly some days. There's been a couple of fluctuations in the humidity, from 55% RH to 70%, so I've straightened the ducting and tried to perfect my ventilation and environment as much as possible. I'm debating buying a co2 bag to help my plant deal with the heat and intense light. The trichomes are really starting to show, with the 60x magnifier I can see so many cool heads. It just seems that my buds aren't really filling out beneath the pistils, causing me to worry. This week there were so many photos that even after picking out my favourites I ended up with 111 of them! Also, it's worth noting that the nutrient amounts I have listed are in *ml/1.5l. Happy growing! KIZDOG

Bud sites are getting ready now. I did a bit more LST and removed a few side shoots which never gonna make it due to lack of light. I replaced the light, under the TS 1000 she was praying all day long. On the previous run I had problems with the FC3000, it was turning itself off at random times. Mars Hydro was kindly sent me a replacement controller, so far it seems like this problem has been solved. However, I tried to use the app again and it’s still shite. 💩😂 So I just use the light in manual mode. Such a shame for the extra features I cannot use. For DLI I will use the following chart: AUTO FLOWER LED LIGHT INTENSITY Recommended LED PPF/PAR Values / DLI Based on 20 hrs. of light. Seedlings 150 - 200 umol / DLI 10.80 - 14.4 moles per day Veg up to 9" 450 umol / DLI 32.40 moles per day Early bloom 500 umol / DLI 36.00 moles per day Mid bloom 650 umol / DLI 46.80 moles per day Late bloom 750 umol / DLI 54.00 moles per day Ripen 400 umol / DLI 28.80 moles per day *** Use extreme caution going 700 umol or higher @ 20 hrs/day this could cause leaf burn*** The only difference is that I will keep this run in 18/6, so I ignore the PAR values above. IMO the best thing you can do is to read the leaves all the time and use the charts as a guidance.

The photo version of this strain did nicely. It handled a newbie grower in a small space perfectly. I think with good lighting and more nutrients I’d have had a really good yield.

To germinate the seeds I put them in hot water for 12 hours, I put them in a dish with slightly damp paper and closed it with the film. The seeds are germinated in 48 hours. At this point I put the seeds in plastic cups previously drilled and filled with a mix of ground professional plus 30%, coco professional plus 69% and mychorrhize 1%, at a depth of 3 cm. Then I watered with 5 ml of distilled water with rhizotonic and NPK + micro elements 20-10-10 ph: 6.0 and c: 0.5. After 3 days the little ones came out. At 7 days from the seed the young plants exhibit an incredible vigor and an already thick and strong root system.

Slowly lowering the EC as we get to the end.

25.05. 🌿 Day 25 – Stretching Begins! The plants have noticeably stretched since the last update — a clear sign that they’re moving deeper into the vegetative phase. The vertical growth is picking up pace, but they’re still looking strong and well-balanced. Despite the rapid upward growth, structure remains solid, with thick stems and healthy leaf development. The 19L pots and BioGrow feeding seem to be doing their job — no signs of deficiencies or stress. Light distance and environment are being carefully managed to control the stretch and keep the plants from getting too lanky. So far, they’re adapting really well. 💪 Overall: they’re thriving! —————————————————————— 27.05.

The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of water to be fed. Day 1 we have high temperature of 91°F with mostly sunny skies. I watered 2-3 gallons from the hose. Day 2 we had a high temperature of 90°F with clear, sunny skies. I watered 2-3 gallons from the hose. Day 3 we had a high temperature of 97°F with mostly sunny skies. It was a scorcher. I watered 2-3 gallons twice today from the hose. Day 4 we had high temperature of 95°, but it felt like 102°. Skies were partly cloudy. I watered 2-3 gallons twice today. Day 5 we had rain the previous night and early morning. We had cloudy skies, with high temperature of 81°F. I did not water today. I added 50ml blood meal to each pot spread evenly on top of the soil. Day 6 we had a high temperature of 87°F and mostly sunny skies. I watered 2-3 gallons. Day 7 we had partly cloudy skies and a high temperature of 86°F. I watered 2-3 gallons each pot This week was a success. These girls really began to fill out. We've got another month ish til flower begins so I expect these to be monsters.

Continue Daily low stress training. Cut all nutrients in half. Added another led light. Cutting back lights to 18 hours. Started to defoliate a small amount(day 30) New growth seems pretty healthy. Few leaves have nutrient burns but not all of them. Checked ph and it was a little high so I got it down to 5.75. Adding 1/2 gallon of distilled water a day to prevent further burn. Day 33 She starting to show some preflower so I did a water change added 1ml of each nutrients (added koolbloom)execpt armor si and hydroguard 1/2 ml each. PPM 325 PH5.8 Humidity 50% Temp 80F Week summary. A few issues with nutrient burn but I think I have found the sweet spot 300PPM. Vegetative growth has slowed down this week and started preflower. She's drinking about a gallon of water a day. I'm a little worried about the height so I might switch to 12/12 lighting. (Small tent height)

12/6 Update - seed is germinated and ready to grow! I will post a new weekly update tomorrow! So I had to scrap this plant - it was just growing too slow and it was unfortunately not a health plant. I decided to remove the plant altogether and have started a new seed. Since this plant will be four week behind its neighbor in the tent I will have to modify my approach to training on this one. I typically mainline - mostly just to utilize the space in the best way that I can. This time around I think I will just top it maybe once or twice and then let it recover for two weeks then flip to flower and manage out the lower branches from there. It will be kind of fun to do a side by side with these. The neighbor plant is super healthy and is almost ready for its first topping, I did however go through today and remove all of the growth from the plant (other than topping) so that should slow that one down quite a bit and give this new plant some what of a chance to catch up. Also - check out the worms!!! I pulled out that plant and reached down into the soil just to see what the worm activity was looking like - I pulled out this little ball of freshly hatched worms! Barney's Farm Gorilla Zkittles - Feminized. I'll be growing just one of these plants in this 2x4x5 tent. It will be growing side by side with another plant but I wanted to be able to document them separately. This is my fourth grow using this set up, I'm excited to document the process this time around! The seed broke ground today! Photos and time-lapse coming soon!

Hi Fellow Growers They are going good. The heat its stressing them. the are not drinking so much water and yellowing a bit.... Not so Nitrogen Green but i thinkthey are doing fine. Maybe some Co2 whould help them. Give me some Ideias how can a use the heat and make it become beneficial Chears BrotherHood

Hello, readers! Slow-looking grow, Mirra feels fine. I removed some lower-smallest buds at the beginning of the week. Smell become super strong now. Feeding that's not from TA is in gr/l

Day 60- Plain ph water. Day 62- Fed Big Bloom and Tiger Bloom. Day 63- Fed CalMag. Day 64- Plain ph water. Day 65- CalMag water. Day 66- Big Bloom and Tiger Bloom.

I have been using LST in the form of a fan on medium speed to try and strengthen the main stalk of the plant as well as planter rotation to strengthen the main stalk for tie down LST. So far I've been impressed with the rate of growth and the overall experiment. For what it's worth, the growth wth is very very similar to a hydroponics growth. I'm sure as the experiment continues I'll notice some big differences. It does appear to have either a minor potassium deficiency or a little too much nitrogen. Will monitor and update as needed. The above signs may have been trying to indicate the main stalk was weakening from too much weight from vertical grow rate. This would ultimately lead to a fractured stalk. Is this what happened or is it a fungus or disease problem? Plant C sprouted within 48hrs and will be 6 days behind Plant A. End goal of harvest is still 360g from the two plants combined. Both plants are looking very happy regardless of the toxicity or deficiency. Strong strain nonetheless.

📆 Semana 9: Debido a las altas temperaturas, tuve que cosechar la Mimosa Auto cultivada en el sistema hidropónico, ya que no soportó el calor. Los cogollos quedaron densos y resinosos, con tonos anaranjados en los pistilos que indican su madurez. El perfil aromático se mantiene complejo, con notas cítricas y terrosas que prometen potencia y sabor. La otra Mimosa Auto sigue en su ciclo, creciendo fuerte en sustrato, donde el ambiente es más estable y controlado, lo que le permite continuar desarrollándose con buena salud. ¡Seguimos creciendo fuerte! 💪

💪all plants look good small deficits would be corrected😊 use only water with a pH of 6.4