Recommended
Processing
Likes
Comments
Share
@Drtomb
Follow
Just hit day 10 of flower.this net has about 20% touching the 2nd trellis. And about 70% almost touching. One plant has a very big node spacing. Over all plants are healthy and have been given a second scarecrow method trim.
Likes
13
Share
Unfortunate Week... Honey cream had a couple of "budrot" spots forming due to droplets of water dripping into the flower and not drying (99%humidity nights)... Thankfully those buds were cut down and she doesn't seem to be producing any more "budrot".. Apart from that, the smell is amazing on her. Power Flower is going nicely too, but seems to not have too much smell...
Likes
4
Share
Overall, we are very pleased with the end result of this grow! For the harvesting process itself - once the trichomes on the buds were milky white (see zoomed in photo above), we cut down the branches and hung to dry in the tent. The light was on in the photo to display the hanging to dry method, but the lights were turned off for the duration of the drying process. On the first day the buds were hanging, all large fan leaves were trimmed. Over the course of the next week, day by day, more leaves were trimmed. After 8/9 days of drying, the buds were ready to move into the curing stage (the test for this: the skinny branches would snap when bent, and the thicker branches were near snapping when bent). On day 9, buds were cut from the branches, trimming off the final accessible leaves, without damaging the trichomes, and placed in glass jars with dehumidifier pouches to begin the curing process. For the first 7 days, the jars were opened (burped) for 10 minutes twice daily. After the first week, burping was reduced to once a day and then every few days. Strain first tested after 10 days of curing, but cured for a total of 4 for optimal results. Citrusy flavor, excellent sativa for mellow productivity and a mood boost. Now that I have my first grow under my belt, it's time to move onto the next!
Likes
14
Share
Another easy week for the Runtz ladies ❤️ I’ve been watching closely and counting down, they are getting so close but could still go a little further without getting too much amber. I’m trying to time the harvest to go along with my other strain I have going as I have no other space available 🙈 I switched to straight PH water the end of last week, and they have gotten three feeds with runoff since, there will probably be 2 more. They are taking less water now, or rather, it’s lasting longer now. RH was dropped to between 48-50 % and temps have been between 76-79 degrees, and about 69 degeees at night. Thanks for checking the grow out, Happy Gardening 🇨🇦👊❤️🌱
Likes
35
Share
🍼Greenhouse Feeding BioGrow & Bio Bloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
17
Share
@Kirsten
Follow
19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. Thanks for checking out my diary 🍃 ✌️
Likes
13
Share
@Sadhus
Follow
Rinçage, je réduis L'EC de moitié, 3,4 a 1,7 , sa mûri, les trichomes deviennent bien ambré,les tête sont énormes et très dense , une odeur gazy sucré bonbon fruits très forte et très agréable, j'ai deja recolter une bouture qui avait commencé la senescence bien avant les autres et le finger hash était sublime, les 4 pied mère int sale Mines et absolument rien a voir avec les clones,
Likes
12
Share
Everything is filling up the canopy nicely so I flipped to flower (10/19/18) so they don’t get to out of control during the first couple weeks as they like to stretch. Will be doing a slight Lollipopping in the next day or 2 and will have to add a second layer of trellis either this week or next.
Likes
22
Share
These Ladies are in bloom with popcorn on alot of the branches. Some branches are getting heavy with frosty Nugz but half of the plant is flowering at a slower pace. I noticed some powdery spots on some of my leaves this week. After some research I've decided to seek advice from the GD community vs relying on my own experience or trying methods that may negatively affect these beautiful plants. Feel free to chime in 🤔
Likes
13
Share
@XanHalen
Follow
Apr 20: They hanging out at 65% rh and 65F.. Going for 7-10 day dry… No wet trim, cut plants in half and hung… Very happy with density and resin production… Can’t wait to jar and test in 2-3 weeks… I feel comfortable with this strain, I think it’s time to move on… Really wanna run some Mephisto seeds….
Likes
17
Share
Just focusing on the zkittles now,.. she is focusing on fattening up, not gone any taller this week, I noticed a bit of yellowing around some edges of the leaves, I've added a bit of calmag to this week's feed, and last week I did a somewhat diluted version of biobizzes feed chart,.. any advice on how you guys think she's looking would be appreciated,.. roll on next week 👌 ** update ** 28th, I've started flushing now after abit of advice planning on a 2 week flush that takes her to 77 days which is what fast buds say on there site is top end for this zkittles auto,... ** update update ** after speaking with fastbuds they think there is 3-4 weeks left here so I've added bloom, topmax, heaven and acti Vera back to the feed 🤦‍♂️
Likes
28
Share
@Ferenc
Follow
Day 72, 21st of November 2020: Gorgeous, tall and strechy. Nice nice and nice. Straching has stopped finally and more work on buds. Amazing creation. All good as it can be seen keep getting older haha. Buds are on the way getting fat ;) Fertilization is the same every 2nd day with the mix and the ratio above.... All LST has been removed as the plant remains the same so no need to keep her in "chains". The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.
Likes
50
Share
@6ix6ix6ix
Follow
Hello! How’s it growing, duuuude? (Very smart joke going-growing haha). So the day has finally come. Week 9 sharp. day 63 - cut down two out of 3 girls. The trichs are good, the plants themselves are funny of course because of the nitrogen diet, the leaves are not fading, crunchy as pringles. Girl 1 has pretty dense buds and heavy, girl 2 is more airy and light but still enough for me ;) Girl 3 asked for some time to get herself ready and I don’t mind. However she is foxtailing As Fuuuuu. Could this be because of N overfeeding in flower? Cuz the temperatures are not THAT high. Anyway, she is welcome as she is. Already getting ready for round two. The soil ill go with will be biobizz light mix. And will be putting big bucks in the feeding. Probably will get the whole range of biobizz. Have purchased beautiful seeds from RQS This time i want to grow 2 plants instead of three to give them more air and light. I chose cookies to be one of the girls, but still not sure between Purple Punch and Mimosa. Maybe you have something to say? Collected all the leaves and waiting for the trim of ms. “Late to the party” and will be making canna butter and hope to bake some brownies for my wife to enjoy because she cant smoke in any form. Hellava hobby we got guys and girls. Love every minute of it! Will add harvest report when i cut down the third plant and dry out to see final weight. Enjoy your growing and thanks for stopping by!
Likes
76
Share
SETUP: -MIGRO 100 -Grow space 60X60X160 (Mammoth PRO 60). -Grow medium is Gold Label Special Mix Gold edition Premium, Airpot (10l). _____________________________ 29th August - Day 6 (Day 8 Beer Cup) - Gave them 50ml of 💧each. The Beer Cup one is looking like she needed more water. _____________________________ 1st September - Day 9 (Day 11 Beer Cup that's been transplanted) - I need to support both cause the tip over if not :( _____________________________ 6th September - Day 14 (Day 16 "Beer Cup") - Gave Final Pot 100ml of 💧. Nothing for "Beer Cup". Increased the LED from 1/5 of strength to 2/5 of strength.
Likes
6
Share
Week 6 of flowering, everything going well, very strong smell, all buds are very sticky & frosty 😃. #5 growing big dense solid buds about 5inches long & 5inches in girth & solid as a rock, very, very sticky. #A1 is starting to 🦊 tail a bit. Lower leaves turning a purple colour on some plants. Trichomes are still clear
Likes
41
Share
Están creciendo muy bien! 😁 😁 He notado que el Rino Skin está haciendo que los tallos engorden bastante!! no lo había probado nunca y me está gustando. 🔴 He comenzado a hacer la técnica -LST - hay algunas Runtz que están germinadas después y la verdad es que están un poco pequeñas parece que la genética ha salido un poco rarita. Las Zkitllez hay dos que germinaron solo con un cotiledón, una de ellas está a la par pero otra está un poquito atrasada... creciendo poco a poco pero luchando 😊😊 y otra de ellas la que salió bien está espectacular me encanta! 😍😍 Las Banana Cream 🍌 están super grandes! Creo que un poquito más de lo normal la distancia internodal parece un poco larga no sé a qué se debe... y están alimentándose de lujo
Likes
18
Share
@Stonyways
Follow
relaxing and enjoying the show almost at max watts SPIDER FARMER SF2000 is now maxed out at 207w , 16"-18" from the plants and I will need to keep up with pruning to allow more air flow and more light to penetrate deeper into the plant. 2, 6" oscillating fans on 100%, may be on low or just one stationary but at this point in the grow air flow is a MUST, specially for the thick, dense vegetation of the OG Kush. trying my hardest to stick with the 4" ventalation til the end of the grow. Right now I have to replace the exhaust ducting due to tiny pin holes leaking more than a bit of light.