She's done very well this week. Her flowers are fattening up a treat! I notice A LOT of pistils, I'm wondering if this is an indication of bud density? Anyway, apologies for poor pics this week, they're all getting too big to get in and out the tent without damage. Last week I snapped the main cola on the CBD 😭

11-21 All the girls had a great first week and looking very happy and ready to be topped moving into week 2. Average height of 11.5”. Changed circulation pump from 75gph to 160gph 11-22 Update Topped all 4 resulting in a 10” average. 11-23 Update All responded great to topping and pushing out a lot of new growth. Added video including the mob boss and duct tape moms on the RDWC skid and the older sisters in week 9 overall, flower week 5 in the flower tent that these will move into.

Insanely ☃️

Afghan Original was developed by crossing several Afghani Indica landraces, so there’s only 100% Afghani cannabis genetics behind it. Potent, sturdy and perfect for novice growers as well as more experienced enthusiasts with bigger demands. A resin production champion it can be conveniently used for hasheesh making! Afghan Original has been probated by hundreds of growers and proven a sturdy, fast growing Indica that yields heavily and can sustain minor mishaps. Afghan Original can be regarded as “the very Afghani cannabis” that any devoted stoner feels obliged to try at least once! Mostly grown out of doors, but Afghan Original works for indoor growing just as brilliantly. Perfect choice for hydroponic/aeroponic setups, green houses and even balconies! Provide at least 18-20 litres for a full-size root system if using soil or substrate. Feel free to make Afghan Original cannabis bushier by using any training techniques such as LST, FIM or topping, ScroG or SoG, mainlining or supercropping. About 35-50% increase in yielding can be expected after training! Resistant to molds. Insect pests are guarded away with aggressive hashy stench – another superpower of Afghan Original! Sometimes plants need supports further into flowering to stay vertical (weighy colas). Outdoor harvesting time is late September – early October.

Sind in der 8ten Woche aktuell, am Donnerstag den 30.10 wurde die Ladys großzügig entlaubt. Bin sehr gehyped jetzt auf den Endspurt.

.

_____----*Jan 13th added photos*----_____ _-** Jan16th added photos **-_ She's still chugging along entering week 3 now.. Just gave alil recharge so far , besides having some water issues here (tap got funky funky) but had some rv water filters plopped onto the tap and all is in range ec/ph wise now. Issue averted atleast i caught it, got in the habit of checking PPM of the tap everytime just to be sure (I aerate 5gal of tap water as I use it to mix whicheve stuff I maybe using aswell. That's about the only major thingy that really happened. I am seeing some leaf variegation I hope it's nothing more serious havnt had any tmv before so I'll be keeping a tight eye. Fingers crossed tho, I do have a second started that was gonna ne ran without plagron but if she's sick I got a back up. Hoping it's nothing tho, 🙏 Until the next update , I'll throw more photos up as the week gets going. Thanks again for checking in, best of luck to anyone that's involved in this contest !! Been fun watching all ur plants get going !

The Amnesia haze 2 is turning light green yellowish some told me it could be deficiency or it could be just flowering taking energy from the leaves but I’m not sure I used Gaia green bloom recently thinking it would help I’m going to too water that haze from here out the other have and sour I’m going to continue to bottom feed I took some trichome pics I don’t think there ready yet but I think I’m getting close to the date I feel the the amnesia haze 2 is going to hit 90+ days tho kind of hope not cause the other haze and sour are probably going be done sooner I want to fry them all at the same time March 7th I think the haze #2 and Sour d is ready but the other Haze is not I’m pretty sure I have another week pre maybe even two for it to be near ready I need the tent to harvest and dry what’s ready I’m going try leave the ready ones in for another week in hope it doesn’t mess them up

Day 78 16/09/24 Monday Feed today using de-chlorinated tap water pH. She is stacking nicely, a strong aroma is penetrating 🤩 she's starting to really glisten with frost this week 💚 Pic and vid update ✌️ Day 79 17/09/24 Tuesday De-chlorinated tap water pH 6 today with Plagron products. Pic update Day 81 19/09/24 Thursday De-chlorinated tap water pH 6 only today. Day 83 21/09/24 Saturday Another feed to push this week they seem to be handling it 💚. Fattening up on the buds now and pistils starting to mature. She is flooding in trichomes 😍

week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

12/22/2021 Starting the over night soak in H2O2 water, then onto soil mix to finish germination. Soaking in H2O2 and water, about an ounce h2o2 mixed with .500ml spring water. It aids in breaking down seed shell, and sanitize seeds at the same time. I will sow directly into soil as breeder suggest. 12/25/2021 All I5 seeds sprouted in water little 1-2 mm tap roots, potted into small cups and reppot as necessary, should get 100% germ rate if I don't hurt them tiny tap roots putting them in soil. 12/28/2021 Lemon OG 100% germ rate, Biscotti Skunk 4 of 5, Grape Skunk 4of5,and I will take the blame if others don't take because of miss handling, so very happy with the germination rate I'll give it 100% Thanks @QCS for given me the opportunity to grow your genetics.🙏🏻 Ps. ROJI OGS will go next round I'd like to do them alone I think she will be special. Biscotti Skunk Biscotti Skunk Cannabis Seeds Feminized With a noteworthy lineage, Biscotti Skunk is a mix between the Cookies variant and Kush on one end, acting as the base layer for flavors and effects, while the Skunk addition rounds it off beautifully on the other end, creating Biscotti Skunk a totally unique marijuana strain. This strain works good indoors or outdoors it produces nice big buds. The flowering period for her is 8 to 9 weeks Outdoors this plants will be ready to harvest at the beginning of October, and offer yields of around 700g per plant in ideal conditions. The effects you can expect from Biscotti Skunk strain are relaxation with a good creativity boost, followed by a gradual energizing body feel. A bud with a very complex flavor profile, this indica-leaning hybrid Skunk come from planting 50 Skunk F2 seeds and one of the fenotip came out looking like this. We liked the strain so much that we have finally duplicate the strain. Grape Skunk is one of those tangy, tropical smokes. Her flowers give off the unmistakable scent of tropical citrus, with some accents of grape. THC levels is between 20% and 24%. Grape Skunk is a large producer under optimum conditions. A dense cannabis plant with pink purple colors. Growing Grape Skunk cannabis is easy and great for first time grower. This strain is also great for relieving stress and anxiety, as well as reducing chronic pain, nausea, and insomnia. Lemon Og Kush Cannabis Seeds Feminized This strain joins the OG Kush genetics, with strong Indica and physical effect, cross with a Skunk plant which has a very distinctive and special lemony flavor. The result of this crossing between these two robust genetics a plant with similar structure than the OG, average internodal distance, columnar structure that can branch a little more if the plant has enough space and substrate. Still, it mantains the average height of the OG Kush , producing lots of flowers in relation to its average size. Production can reach 550g/m2 in about 8-9 weeks , which will allow us to harvest our plants before the rainy season arrives, without worrying about molds: it is a mold resistant marijuana strain. Regarding the flavor, it huge amount of resin and terpenes will release a strong fuel and lemon smell, which is noticeable even when we smoke, reaching every corner of our palate. Moreover, its effect is very medicinal , ideal to eliminate nausea and stimulate appetite, deeply relaxing both body and mind. Lemon Og Kush Cannabis Seeds Feminized This strain joins the OG Kush genetics, with strong Indica and physical effect, cross with a Skunk plant which has a very distinctive and special lemony flavor. The result of this crossing between these two robust genetics a plant with similar structure than the OG, average internodal distance, columnar structure that can branch a little more if the plant has enough space and substrate. Still, it mantains the average height of the OG Kush , producing lots of flowers in relation to its average size. Production can reach 550g/m2 in about 8-9 weeks , which will allow us to harvest our plants before the rainy season arrives, without worrying about molds: it is a mold resistant marijuana strain. Regarding the flavor, it huge amount of resin and terpenes will release a strong fuel and lemon smell, which is noticeable even when we smoke, reaching every corner of our palate. Moreover, its effect is very medicinal , ideal to eliminate nausea and stimulate appetite, deeply relaxing both body and mind. It's obvious I get regular seed at this point. But feminized information was all they had on website,assuming it's all the same.

I've enjoyed every minute of this and I'm really pleased with how they turned out . I've learned quite a bit. I decided to dry them for 10 days leaving the stalks as long as I could to absorb more flavour, also I had to give them a light trim as I found a small amount of bud rot but I think I caught it really early. All in all I'm very pleased with all the products I used and will be using them again without a doubt. Thanks for reading my ramblings lol ✌️🏻

Not a lot to update the seedlings have came up out the soil at this point they are still to small to tell any visible differences. I started all the seeds from all 10 packs and and I put 26 of them in soil I now have about 20 of them left I still have atleast one left if every strain. I just kept the 20 plants that all started off at the same time it’s so much easier when there is not some plants behind from the rip. In a few days I will pick out the best one from each of the 10 strains and toss the rest so sad there is a plant count here.

Día 23 (24/06) Las plantas ya van por el 6º nudo. Topping is coming! 😁 Día 24 (25/06) Topping time! Hago topping por encima del 4º nudo real. A ver como reaccionan! 🚀 Día 25 (26/06) Riego con 500 ml H20 pH 6,5 Han reaccionado bien al topping y las ramas inferiores se empiezan a estirar considerablemente Hago LST a algunas de las ramas más largas Día 26 (27/06) Las plantas llevan bien el topping. Pequeños ajustes de LST Día 27 (28/06) Siguen a buen ritmo! Día 28 (29/06) Riego con 500 ml H20 pH 6,5 Día 29 (30/06) Las dos nuevas ramas tras al topping empiezan a formarse muy rápidamente! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

Une semaine très chaude, mais tous a l'air de bien ce passer. Vos remarques et conseil sont le biens venus.

D36 - The first day in the first week of flower. The girls look healthy overall, although there are a couple of minor issues. A single leaf on the first girl has some discolored spots. I used a loupe to look closer at it but couldn't see any pests, so I'm not sure what the issue might be. On the other hand, the second girl has light-colored leaf tips on the topmost growth. It reminds me of light bleaching, but I checked with the meter, and it was only reading 400 PPFD, so I doubt that is the issue. There are a few light-colored tips on the first girl's top as well, but it is less pronounced than on the second girl. Minor issues for sure, but I'll keep my eyes on them. I did some additional LST to keep the girls squat and bushy, and I gave each 1.25-liters of water @ pH 6.2 with 25 ml EM-1. D37 - I decided to remove the spotty leaf, and took a look with the microscope but couldn't really see anything. D38 - More LST D40 - Even more LST D41 - Just pics today. I haven't spotted any more spotted leaves (Ha), and the light-colored tips haven't progressed. So far so good... D42 - We're at the end of the first week of flower, and all is well. I did minor defoliation on the lower branches, removing fan leaves that weren't getting any light, and continued with the LST to maintain a flat canopy. I finally turned on the Blumat system since the soil had dried out enough to be in a reasonable range. I need to monitor it for the next few days, ensuring it runs correctly. The pH of the water in the reservoir is 6.7. I also increased the amount of light the girls are getting to around 550-600 PPFD at the canopy level.