It’s getting cold and damp. Fingers crossed for a couple warm weeks into croptober

Week 5 Day 29 Performed extra LST and fed her 7.5ml/1gal of floranova bloom to start flowering season!! Day 30 Spent the whole morning outdoors until 2.00pm Day 31 Plan on to make Scrog soon for the ladies, in the meantime we continue their sun and light schedule 19/5 lately Day 32 Gave her some water early morning and took her outdoors until 3pm Showed her first white hairs We were wondering when And omg here we go! Day 33 Fed her extra 5ml (flora Nova bloom) Raise from 1300 to 1450ppm Day 34 Those nutes are doing her very well Woke up like this! Day 35 Showing more tiny hairs all around Day 36 Developing more leaves and hairs to start making Buds full of Trichomes :)!

Hey bros, She is almost ready for the flip, I think maybe one more week or so, because I want her to get big fat buds so I have to let her build a structure for it. At least for now, all the colas seems to be growing perfectly at the same height, as if she is distributing her energy equally, it's is indeed something unique and I think it will have a good impact on her overall size and yield. It takes a lot of work to get her like that. Her branches are around 25cm each, I think I will let then grow from 35-40 so she can carry a big load of dense buds. What do you think? For these last weeks of vegetation, I'm turning on the Flowering LED part of the QB, which now gives me 120w at 3000k/4000k. Did some LST and got her tied up as she was big enough now and can grow freely. We are now at 8 main colas with 4 internal second ones that I think will get at the main class before flowering, let's hope so. It will be a beautiful shape. So. not counting the super extra work that mainlining is, I think I'm liking it. Not sure If I will run it again, but it's fun and the plant seems to love it also. Oh and I almost forgot.. I had to put down the dosage of AN back to 1/4 of the recommended because I think some leafs were starting to get yellow tips.. very very very small, almost not visible.. but.. as a warning.. I went down. Hope I did right and did not lose some vigorous growth at this last stage of vegetation. But still they love this stuff. Im anxious to see how the flowering line does... going at 1/4 and up every week. I also stop to PH the feeding, I was giving her food at 5.8 but I've read a lot and understood how the ph perfect works and I bet they will be safe with 6.3, as it is after I add the nutrients to my 6.8 ph well-water. Im still controlling ppm though, I don't think I can add the full dosage as we have lots of extreme factors here like high temperatures, high humidity, not the perfect vpd, and etc... so I started at 1/4 and got up to 1/2 and now back to 1/4. She is vigorous. Até a próxima semana! Tchau, do Brazil! =]

Lowered lights to 50% and raised them to 26 in.

Leaves are green, no nutrients deficiency, she does what she’s good at, shape is clean, she’s doing so good that i’ll let her listen to some Four Seasons from Vivaldi this afternoon.

03/01/22: All main colas and smaller colas have an abundance of white trichmomes - looking very well and are sticky. Defoliated for the final time and Lollipopped removing all of the bottom veg to promote bud growth. Pistils are still hairy - just waiting for them to flatten down. only a very few pistils throughout are turning brown - hopefully this will increase within the next few weeks. Overall I am happy with the way things are going - and should only be 2-3 weeks more til harvest.

All looking alright now just abit of stunted growth, looks like the Og is 3 days behind the gelato but I’m still going to be flipping the lights to 12/12 by the end of week 4

6.11.24 Gave all 1L apart from Hubba got 0.5L Ph 9.9 2.5ml ph down in 10L = ph 6.3 10.11.24 Turned 600w light to 75% power 70cm ppfd 550 changed lights to 21/3 10.11.24 Gave all 1L apart from and lemonade got 0.5L Recharge 2ml/L Bio heaven 2ml/L Acti Vera 2ml/L Root juice Ph 7.8-6.4= 1ml ph down Transplanted 2nd lemon haze in same pot.

D78/F34 - 17/06/23 - I changed light schedule hoping she's going better. (6 only red ligh and 7 red-white) D79/F35 - 18/06/23 - New lights schedule is running D80/F36 - 19/06/23 - Added water and integrators EC 1.0 and pH 6.4 D81/F37 - 20/06/23 - Nothing to report D82/F38 - 21/06/23 - Added water and nutes EC 1.0 and pH 5.7 D83/F39 - 22/06/23 - Temp is too high for both water and environment. I see signals of suffering on the flowers (foxtailing) D84/F40 - 23/06/23 - I'm trying to keep the Tremp under control but isn't easy. To lowering water temp (that now is about 26 °C) I'm adding some ice to the water

Hey what’s up fellas ✌️ Week 2 of flowering, I have trim the legs by cutting all the small shoots in the bottom that won’t reach the canopy. And removing some few big fans leaves that are covering some lower shoots. I gave them a lil bit of nutrients during this week, last time was about 13 days ago. Just to support the stretch. Keeping an eye on the plants is the best way to know when to feed them. Lights are at max level now, all the ladies should have plenty enough space to grow without reaching the cooking zone. The Mars-Hydro led is just a bit lower and closer as it produces less heat. ✅New Growers Tips✅ ✅Trim your plants legs, don’t waste energy on the bottom popcorn buds. ✅Your plants are stretching, they need Nitrogen, stick to your Grow/Veg. nutrients ✅Always pop more seeds than expected to grow, look at the shitty plants in the middle between the 2 scrog in the video, those plants were germinated same day than the ones in the scrog... Keep the best phenotypes and put the shitty ones at the trash. That’s all for this week 😉 Stay tuned for the Jungle Show 😂👍 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)

Week 4: Girls have responded well to nutes. Defoliation started this week. White spots started showing, After research we believe this to be because of our hard water and getting water on the leaves. We also started LST using fishing line, however this did not work so we removed it.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Harvest time for Divine storm. Not much to say about this strain, except this is my last time growing it. July 11 update, 84 grams dry weight. Same taste and smell as before, a wine taste with a bit of fruit.

Blühe Zkittlez Blühe Zkittlez Blühehehe Zkithehelez. Forget it. Aber gefällt mir. Die Pflanze. Und Growdiaries. Und andere Growdiaries. Und Ganja... Und BARNEYS FARM. Oh mann, wie kann man die Vergessen zu Erwähnen. Die haben mir schon ein mal das Grinsen ins Gesucht gemeißelt. Und ich weiß nicht warum, aber ich mag die Watermelon Zkittlez seid CorinnaFarm ein Growdiary gemacht hat.

Holky jsou připraveny na sklizeň dva dny tma a hurá na to😁🤨😉🍨🍧🍦 Každá je jiná těším se .🚀🚀🚀

26.5. Harvest single clone. Watering with tea 2ml organic PK 29.5 Watering on eye 1.6. Watering on eye 4.6 Diluted tea 7.6 Watering 0.5L 8.6 Harvest day✂️ Creamatic 29.7g RQS 23.3 Reused 27.5 Biotabs Total from 3 80.5g 18,3g Single clone (Digglet) 17.4g Triplets (Dugtrio) Total 116.2

So far so good she is loud but the volume ain't cracked up yet...until nxt week happy growing