Likes
Comments
Share
16 day perfect slow dry. Starting cure. You can smell the purple in this strain. Will update after a short cure and smoke test and getting an accurate smell description. 40 grams total of dry weight nice sized buds and structure. Super natural and pretty looking.
Likes
9
Share
@Luv2Grow
Follow
Day 43 - Starting week 7 and she’s looking good. She’s starting to stretch more every day and flowers are starting to fatten up a bit. Gonna continue with the foxfarm feeding schedule. Can’t wait for her to finish! Day 44 - The room is really starting to smell amazing. Just keeping on with the foxfarm nute schedule until she’s ready to be cut in a couple more weeks. Still plenty of fattening and growing to go. Day 45 - No major changes, she’s just chugging along. Gave a feeding of just water today and tomorrow will be the foxfarm feeding. I love her look and the smell starting to really come from her. Day 46 - No major changes, just continuing to fatten, grow and definitely getting really frosty! Day 47 - What can I say? This thing is an amazing grow and smelling amazing. She just growing and fattening each day. Still to early to really look at the trichs but wanted to look anyway. Got a few decent pics and there’s a few cloudy ones in there. Gave her straight pH’d water today and tomorrow and will give another feeding on Saturday. Day 48 - No big changes, just continuing to fatten up. Held off on watering today, she didn’t really drink munch compared to the GC. Will give her an actual “feeding” tomorrow. Day 49 - All is looking good and she’s plumping up each day. Gave her the foxfarm feeding today. Tomorrow starts week 8 so will continue with the feeding schedule until the end. She’s really starting to smell up the room in my house and loving it.
Processing
Likes
17
Share
@Totter
Follow
Had a busy week looking after her this time. I topped her mid way though last week. It felt so wrong taking a pair if scissors to her after trying to take good care of her. Lol. It definitely slowed her growth down for a good few days after. Then at the weekend I re potted her in a larger pot. I think it's 20lt but not 100% sure. She went a little bit limp after re potting, but only for a day or so, and seems to have recovered nicely now. I'm still on an 18/6 light cycle and using formulex once a week. Though I intend to switch to using Ionic soil grow from tomorrow, so hoping to see the veg stage really come on this week. I added a video clip this week too. Showing off my top of the range cupboard. 😂😂. As always, any advice or criticism welcome. Thanks, and happy growing.
Likes
39
Share
Las altas temperaturas han persistido es por esto que el riego ha sido más seguido variando siempre entre fertilizante y agua. Esta vez ya se utilizó Flawless Finish para este último proceso, una vez secándose el sustrato se comienza con la cosecha. Ha sido un buen cultivo. Veremos como termina esto. Seguimos ! 👽💪
Likes
11
Share
@CocoLogic
Follow
August 30th: (F13) Fertigation once a day with same recipe (1150 EC 6.1 PH) watered until 10-20% run-off August 31th: (F14) Fertigation once a day with same recipe (1150 EC 6.1 PH) watered until 10-20% run-off Sept 1st: (F15) Fertigation once a day with new recipe (Mid-Bloom)(1200 EC 6.2 PH) watered until 10-20% run-off Screwed each QB Board to the roof of each tent to gain some height space Supercropped two branches on the TUT Sept 2nd: (F16) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Sept 3rd: (F17) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Sept 4th: (F18) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Sept 5th: (F19) Fertigation once a day with same recipe (1200 EC 6.2 PH) watered until 10-20% run-off Defoliation on both plants Note: Im happy the TUT stretch is finally over, we are on the extreme limit on the light distance from plant in the TUT tent, I don't see any stress sign so far, will have an eye on this for sure in the next week! :)
Processing
Likes
41
Share
Welcome to the Sweet Seeds Cup 🏆 Hi everyone 🤗. This week she started scattering her Kush aroma 😍. It has developed very well this week. The buds are getting bigger and more mature. She stopped growing in height, but now she is putting all her energy into forming the buds 👍. I will start to slow down the fertilizer from next week :-). Until then, I wish you all a nice start into the new week, stay healthy 🙏🏻, and let it grow 🌱 You can buy this Strain at : https://sweetseeds.es/es/ Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
8
Share
@sweetkaya
Follow
Day 76 - The ladies are getting weight, everything's good. No signs of whiteflies at all. Some days ago I covered the SP with a shading net because the top buds were beginning to burn and the light is not dimmable. I'm going to buy the SP1000 for the next run to have a better final result. Updating in a few days 🙏
Likes
4
Share
The plants have limited space and are in 4 litre pots too keep them controlled. This week I defoliated again and started adding sugar royal.
Likes
2
Share
5/3 - topped between 5th and 6th node, removed first node, pinned branches out flat, removed 2 big fan leaves blocking the lower branches, watered and fed, gave a bit over one quart. She's showing pistils already! 5/5 - repositioned the training wires and removed the top 2 large fan leaves. One of the lower branches reached the side of the container, so I topped it there.
Likes
8
Share
These two did great even through a lil stress they still came out on top. I almost want to run it back but I think it's time for something fruity maybe, maybe having a terpene profile that helps initiate a more stone heavy affect and be indica heavy.
Processing
Likes
4
Share
@matzouf
Follow
~~14/09 Couldnt help myself to try some LST even though it might not be benificial to this plant. Increased the fish mix to 1ml/L, got a spider mite invasion on going. Currently treating with potassic soap and neem oil. Beside that the plants looks healthy to me. ~~16/09 Some stylish rain cover for the rain to come (finally after almost 3 months!)
Likes
144
Share
@DevilsBud
Follow
FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
1
Share
Day 70 (Day F26): streching has started
Likes
21
Share
Processing
Likes
81
Share
Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)
Likes
42
Share
Harvest update on flowering day 75 since the time change to 12/12 hrs. Hey everyone ☺️👍. Today there is a short update of the harvest before the last update after the fermentation comes 😀👍. Both phenotypes were very easy to cut due to their very good bud to leaf ratio ☺️. I already like both phenotypes in terms of smell, although I have to say that Phenotype 1 smells much better and fruity 😍. Was trimmed clean by hand with disinfected scissors :-). Before harvest, both plants were given complete darkness for 48 hours. The trichomes are 70% milky and 30% amber 😍. You can now dry for 7-12 days on the net at 62% humidity. Then it goes for another 12-17 weeks in the glasses with 62% boveda packs which are then changed to 58% boveda packs :-). Until then and for the final harvest update, I wish you all a lot of fun. Stay healthy and let it grow 👍🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
9
Share
switched out my 600w mh for my 6oow hps on day 32 also had to place a stake in her because she grew to fast for her own good i really have just been here to feed her the genetics are great
Likes
17
Share
Day 49. Switched from maxigro to maxibloom. So far so good 👍🏻.
Likes
6
Share
Made a few mistakes with this first grow. To much light and under watering but she’s growing nicely today!