Segunda semana, las plantas crecen de forma correcta aunque de manera dispar, hay algunas que ya tienen 3 nudos (pequeños por cierto) pero hay otras que aun tiene su primer par de hojas. Esta semana comencé a darles los nutrientes según la tabla de Bio Bizz.

I would give this strain an average rating. Nothing great nor bad. I have had both better and worse strains.

Week 7 - The Bounce Back - The Plants Bounce Back Quite Nicely From Last Week’s Defoliation. You Can See Drastic Growth Day By Day Everytime The Lights Go Off And Comes Back On.

Start of Week 5 I have two sections of plants growing from the same feeding resivour. For the first time ever I've decided to do a mid grow flush. I ran through 1-2gal of water on each 5 gal bucket. I use only perlite as medium so I figured that I wouldn't need much to flush. It all drained back to the main resivour and I disposed of it. I ran a 24hr cycle of straight PHed tallboy filtered tap water (160ppm) and then drained that again (340ppm). I refilled the resivour with fresh nutes and PHed again (1100ppm)

8/20 D37 Pics : Ceila 22"x21"x15" Side and Top and she is not really much bigger than the rest weight wise Full tent, this is why I just ordered a bigger boat... they just keep growing. I am going to have them on bloom nuets and water until the new tent is set up in a couple of days hopefully. The five gal pots are a real keeper just need a bigger tent for flowering, the 4x4 with sperate seedling and mini veg area will be fine. Tent porn: https://www.amazon.com/gp/product/B07HQRGL6P/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 8/23 D40 New 4x4 plus 1x4 germ and cloning area tent is setup and plants in the new home. They are looking better not being so jammed up and the light can even be moved up as the side coating is excellent, plenty of light. Climate conditions inside the tent are ridiculously easy to control just from the increased area inside may hold plenty of fans, humidifier, or whatever else is needed. Not to mention being able to stand inside the tent with the plants. The smaller tent is being given veg duties for the next rotation. Fed Rchrg/Bio-bloom-grow just no deficiencies at this point to address, everything seems fine 8/25 D42 End of week First real haircuts for all , leafy strain but easy to work. Tried to get as many sites uncovered completely as possible yet keep the total under 5% so as not stress the plant too much. Worked on the bottoms (heh) of the plants so nothing will restrict air flow or hijack nuets, Will replace these pics with better later, color correction is not as strong as we would wish.

Pre-flowering

Semana 4. 20 - 26 de octubre. Se mantiene en maceta de 1 galon, con Anillo de riego y solución nutritiva. Agregamos tarantula el 24 de octubre y al día siguiente 25 de oct, retiramos esa agua por acumulación de bacterias. Misma nutrición sin Tarántula.

This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)

Dia 37 de vegetacion...

Today is week 5 now since dropped in water to be honest I think these are growing slow compared to other peoples. I changed a couple of things like upped wattage of metal halide from 250 to 400 and started giving full strength nute from half strength which I should of give 3 quarter strength instead of full because I can see a slight tip burn so will back of a little. Water every day till run off. At some point this week I will top for the first time to get the main line thing up and going. See you next week peace.

Day 40 : Watering today community after 3 days. They were too thirsty and drank 2.5L per plant. I added a lot of food to the water. But it finished with 800ppm only. I think Biobizz decreased the density of nutrients. I added 1 co2 tab / 5L as every time. Also made small defoliation to the bottom for all ladies. She have reached 63cm.

Week 8 of flower Well this plant is really filling out. I definitely roasted the edges of the her fan leaves but she is still chugging along nicely. She should start to ripen up in the next couple of weeks. 😎😎

Hello everyone. The week went well, our girl is growing, enjoying a diet of 2000 ppm. On December 17.12.2023, we'll switch the light to 12/12, it's time to start flowering. We took clones from our girl on December 10, 2023. The clones look healthy, but I haven't seen any roots yet, so I'm not sure whether to switch our girl to flowering or wait a bit longer. You'll find out about my decision next week. Don't forget to leave comments and ratings. Thanks, everyone.

The ladies light schedule was changed to 12/12 on Oct.30!❤️ The girls were doing great about 1 week after their big defoliation and SCROG being put in, I decided to flip to flower. I had been tucking and bending and had achieved about 80-90% canopy coverage, the last bit should fill in this week as they begin to stretch. During the 1st week of flower transition, I continued to tuck and bend where I could, trying to maintain an even canopy of tops, as well as fill in as many of the squares, as evenly as I can. It becomes a morning and night routine, I check on my humidifier, say good morning, and tuck away for about 5 minutes or so, it doesn’t take much at this point. Once the first week of stretch is through, I stop tucking branches and allow the tops to continue to grow upwards. I find that by using a SCROG method, there isn’t really a whole lot to do…I don’t defoliate until week 3, so it’s just feeding every 3-4 days and filling my humidifier! When I water is when I like to get under the canopy and check the stems and leaves for anything that shouldn’t be… and typically once a week after watering I’ll wipe down the tent and sanitize any surface I can. There is no reason to get lazy, that’s how you get Pests, Mold, and PM. Happy Gardening 🇨🇦👊❤️

4/27 fed today. Shes growing good. Seems more focused on outward growth rather than vertical.

Week 8 of flower. Started tot flush. The end is near

Wow look at her grow we are in the second week of her flowering stretch and she looks amazing. Smells good already omg super excited about this one ☝️🏽