Everything is not as accurate as I would like to say, but I wanted you guys to see what I can do

La técnica que uso es raspar un poco la semilla con lija de uñas para ablandar la cáscara después la dejo 12 horas en un vaso con agua y la paso después a meto ovni en servilletas

New week in the marshydro set-up 4'x4' tent FC-4800 lamp Got a new toy this weekend so i can read out how much PPFD it will produce still learning to use the thing but it will come Not a lot to say see you next week getting winter frost up in here 💪🏻 30/11/21 made a video today enjoy Of the beauty's 🤘🏻😎🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Starting to get some serious trichomes for autoflowers 💪, few different pheno types in there, coupe will be gems 💎

She was super easy to grow. After figuring out she loved to feed, I began mixing her own nutrients separately and within a week had any deficiencies in check. She kept to a regular cycle of regular feed, light feed, then straight ph’d water. This kept her healthy all throughout. No signs of disease or pests, she performed Like a champ and ended up giving me a little over 6 oz of dense gassy buds. She took a full 10 weeks, and I probably could have given her a few more days, but she is already a very potent smoke, something that is great in the day time for me. For the price of these beans, $45 for 5 feminized seeds, I would highly recommend the 34 street seed Pink Kush strain 🇨🇦👊❤️

Devo dire che queste FF mi hanno sorpreso, la Purple Lemonade di Fast Buds si è rivelata un ottima genetica con una crescita rapida ed una resistenza allo stress elevata, il super soil di Dogma Organics mi ha veramente aiutato questa volta e sono stato ricambiato con dei boccioli dal profumo eccezionale e che cercherò di curare nel migliore dei modi!!! Penso che pianterò ancora molto presto queste Fast Flowering e preleverò qualche altro clone!!!

Day 1 - Ugh! Killed one of my seeds by covering it too deep and too wet😩 Trying to pop another Orange Cookies Nicole to compensate, but not sure that will play well with my 2 autos. Veg for 13 weeks and take clones before switching to flower? Fer Fucks Sake! Day 3 - Coco is finally prepped and pre-soaked in 0.6EC solution, PHd to 6.3, with normal dose of CalMag. Inoculated the two 5gal containers with 25g DynoMyco. Transplanted my two surviving little gals in their forever home this evening. Watching the (kinda old) OCN seeds to see if they're swelling - they are - but I have a lot of newer seeds I could try, too. 12/26 - My vision is that I’ll have beautiful bonsai mainlines under the canopy of the autos. I’m betting it will get completely out of hand, but WTF, worth a shot. Ok, so only one of the Orange Cookies Nicole popped, and it’s looking a little wimpy. Popped two more Grandmommy Purple from Herbie’s. The three seedlings will stay in one gallon pots until the Autos are out of the way. I’ve never tried deliberately stunting veg growth before, but I’ll probably end up getting 32 tops if I mainline the hell out of them the next 12 weeks. Will probably only have room to flower out one of the photos if I’m going to let them go that wide 🙄, but I’d rather go for it now instead of a summer grow with humidity and vacation issues… Plus, the Grandmommy Purple should be THC monsters!

vanno molto bene 😍

Day 43. One Blackberry is going for the roof. Both late ones are small and have 33 days to flower .... Ridiculous ... That run shouldn't happen. But I have at least 5 okeish plants and hope to push them with Mars SP3000 as extras, plus first wavers will be starting to fall , so more space and light .... Day 44. Two smallest girls should go and are going. I will create second proper grower this year already ! I gave to this guy 5 Alaskan Diesel seeds for this year to try to grow, but only because of time - I can't finish smallest two - so I will give them for my friend as well. One turn out not so bad from those 3 lategoers , so I hope 30 days of flower will be enough for her ... One Strawberry Banana looks like a magazine cover girl ! Day 46. Yesterday I kicked them out and it was frosty night, both went down , some branches froze ... It will be interesting ... Friend said all 5 girls pop out and he has enough, so I had to find quick space for them ... The rest was rearranged in main grow room. Happy Growing !!!

Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎

These 2 ladies go their separated ways, 1 stays lower but branching good and slightly paler green, the other dark green leaf and more height to it. But the branches go slower. Rather impressed by the 2 hindus, who got like 4 to 5 days less than the sweet chees xl, and they are overtaking in growth now. Thats it for this week Grow tall!🍀🍀🍀

1st of flowering

Alien OG looking amazing, my best grow by far but I still could have done so much better, but it's a part of improving, learning as I'm growing 😅. Really excited to try this out, 2 of the ladies I will start flushing on their next feed. 👍🏾

8/10: Seeing great growth now..lots of branching. I actually fed them yesterday, but didn't update...several have popped some pistils and pretty much the rest are about to, and I'm out of bat guano, so I went ahead and gave them Open Sesame so they'd have more P available over the next several days. 8/11: I rearranged the garden a little. Moved all four #10's to the right side, the #4's are mostly in the middle...very branchy..the others, mostly to the left are the #2's and maybe a #3. The big plant on the lower left is an auto, as is the runt, and the plant at lower right. The "fern-looking" plant is actually a Jacaranda Tree (blue fern tree)...it's about to get kicked out... 8/12: I did a little training on some of the bushier #4's today. I don't have much space to work with, but I was able to do a little to encourage a race for apex dominance. There were enough pistils on them that I decided to switch the week to "Flowering." 8/13: I fed them today with ONE and added Open Sesame, Silica, Signal, and Sweet & Sticky. I sprayed them all with Axiom (Harpin proteins) and Boom Boom Spray right at dark. 8/14: BAM! They are poppin pistils left and right now...lotsa lovely little cotton tops.👍 8/15: Day 15 since the flip to 12/12..good progress. The #2's and #10's are stacking up and stretching pretty well and the #4's just keep bushing up.

8th week of flowering. There is a light at the end of the tunnel. After a tip from here, I put all the LED lamps I had in the tent. Doesn't matter how cheap they are. The two light bulbs produce 6500k daylight... And it really bears fruit. The resin production around it is clearly visible. I'm excited. I realize that the trichome photos are a little too early, but I'll test the photo quality.

Day 7 & 2 of the NHLs still havnt popped, transplanting the one NHL that did pop today! Day 12 think 1 of the orange sherbet have nute burn so flushing it out and dropping the dose a little hopefully that helps!

Ну вот и закончился наш короткий путь выращивания сатива-доминантного сорта. К сожалению, размер бокса не позволил полноценно включить лампу, так как растение сильно вытянулось и стало получать световые ожоги, плюс еще сыграл недостаток кальция. Изначально хотел 8 больших, толстых и симметричных колл, но пришлось гнуть дополнительно. На фотографии видно, что все ветки закручены по спирали - это пытался решить проблему сильно низкого освещения. Давно не растил сативный сорт и забыл, что в начале цветения растение ну очень сильно вытягивается. В итоге, из-за LST во время цветения, нижние этажи тоже вытянулись и вместо 8 колл получилось в 3 раза больше. Все-таки мне мой метод больше нравится, чем ML, так как времени уходить меньше, стресса меньше, а результат такой же. Снял 607 грамм больших веток и около 100 грам всякой мелочевки. Немножечко пересушил. Так бы вышло грамм 200 чистых шишек. Придется чуток их увлажнить. Вцелом очень доволен собой и результатом. Спасибо что заглянули и порадовались вместе со мной.

First grow done more to come hopefully didn’t think it would be as easy as it was hopefully she smokes nice Dry weight was 51.56g happy enough for me first grow she’s smoking and smelling lovely.

Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.