Likes
19
Share
Let’s Go!! Today is day 31 from seed an these lil baby girls are shooting pistols an showing female productions!! Over the past couple weeks these girls been feasting up an building nice thick structures,building themselves up to get ready for pre flower pretty soon !! Everything is going just how we want it, everything is working properly, our air temp an humidity is stayin on point around 70-75 degrees trough the day and a humidity of 55 - 62% ! Always great! I hope you all enjoy an y’all have an amazing productive day! Peace , love an positive vibes to y’all Cheers πŸ˜Άβ€πŸŒ«οΈπŸ’¨πŸ’¨πŸ’¨πŸ’¨πŸ€™πŸ»Keep them eyes peeled for next week !!🀘🏻πŸ”₯πŸ’―
Likes
10
Share
@KeiKie90
Follow
1.10.2021 Day 8 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 29*C Humidity: 54% - 72% 2.10.2021 Day 9 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 22*C - 29*C Humidity: 52% - 72% 3.10.2021 Day 10 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 29*C Humidity: 56% -78% 4.10.2021 Day 11 Black Haze Info: Nutrients: 2nd week! Water: Temperature: 21*C - 27*C Humidity: 54% - 76% 5.10.2021 Day 12 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 22*C - 29*C Humidity: 50% - 68% 6.10.2021 Day 13 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 28*C Humidity: 51% -72% 7.10.2021 Day 14 Black Haze Info: Nutrients: n/a Water: 300ml Temperature: 21*C - 26*C Humidity: 56% - 70%
Likes
52
Share
Sixth week of flowering, the buds have increased in weight and have hardened (I'll have to start tying them). With this the smell has also increased a lot stinking all the room every time you open the tent. The plant continues to look vigorous and healthy. Less to go until the harvest 🀞🀩🀩🀞
Likes
52
Share
The week starts Monday, Jan-13 in flowering stage. The plant is growing fast, stretching long and I'm constantly tying down branches to maintain an even canopy. There's also a stronger scent of lemon already in the tent. Carried out substantial defoliation of almost all the big fan leaves and a few little stems that were not likely to make it above the canopy. Avoided defoliating the major cola branches. This encourages the plant not to waste resources on a node which is only going to produce β€œpopcorn” buds. The plants reacted well to the defoliation and were looking good by the end of the light cycle for the day. The net is completely full and this will be the last week of applying any LST as part of the ScrOG setup. Light is maintained at 30cm distance from canopy, with daily fertigation at lights on - watering almost 3L per day. Lowered the average RH in the space to 50%. ----prior 4 weeks updates ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The week starts Monday, Jan-06 in flowering stage. The net is filling up nicely with the ScrOG process being enjoyable - just tucking branches nicely under squares once stretched enough. Lost a branch end with 3 nodes accidentally whilst tucking away so now I'm super careful. The Sativa dominant strain is stretching nicely and bends easily. Minor defoliation of lower branches and fan leaves continues daily. Light is maintained at 30cm distance from canopy. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The week starts Monday, Dec-30 in vegetative stage - switching the light regime to flowering. Initiated flowering with an extended dark period prior to switching light regime - this practice is supposed to promote a faster initiation of flowering by the plant. Maintain lights off from Dec-31, 10:00 until Jan 1 - 18:45 allowing a 32hr darkness period prior to switching the light regime. Light regime is set for 12.5/11.5 on/off allowing me a better maintenance window for my living situation. Both plants are growing fast and strong, showing their genetic traits. Some shoots are going through the net already. Have started to tuck branches as they grow to fill up any gaps. Did minor defoliation on both plants near their stem base and centres. Some green algae on roots/coco medium on the surface of the pot. Have defoliated some more which hopefully helps with air circulation at the area. Will monitor over the week - may need to decrease watering frequency, although they seem to be keeping up drinking. Lowered the High Humidity setting of the extraction fan to 60% - which effectively keeps it running at least 75% of the time, and removed the humidifier. Will monitor and adjust as necessary lowering the setting to 50% in a few weeks whilst flowering. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The week starts Monday, Dec-23 in vegetative stage. Installed the ScrOG net - Set at 20cm from the base of the plants, being 55cm from ground. The plant is showing great growth, lots of branching and new growth sprouts. A few branches are beginning to come through the net and almost all main branches are now tied down horizontally after the two recent toppings. Applied more LST and will wait for the branches to reach the net and start tucking. The AC Infinity fan is currently only running intermittently with its current settings. This seems to impact the utilisation and effectiveness of the carbon filter in use. The desired outcome is for the fan to be running for longer periods whilst in Auto config. Lowered the High Level Humidity from 70% to 60%, and more importantly, lowered the Max Speed from 4 to 2 with the intent that a lower fan speed will result in longer periods where the extraction fan is operated to remain below threshold targets for the grow space. Plant growth continues to be strong at the end of the week. Big fan leaves near the top are beginning to look a little serrated and dark, similar to the start of this grow. This may be due to the extra CalMag being added which was the issue at the start of the grow. Will keep monitoring and half the CalMag dosage on next feed. Importantly, I have learnt nutrient mixing of the CalMag should be done prior to the Canna Coco A & B. To date I have done the opposite which may explain my earlier issues. Fertigating daily at the start of the light cycle. One more week of vegetative growth before switching to flowering although I may need to switch earlier due to the vigorous growth and considering the stretch yet to come. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ................................. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- My grow setup includes; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom. Passive intake of air is from a closed off section of the room where the central heating boiler sits - the intake is warm air (20 degC.) and fairly dry (40% RH) during the winter months. - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 - ventilation fans - aquarium heater - small oil heater - small dehumidifier - 20L Airpots and 3.5L general pots for seedling stage - Canna Coco substrate and nutrients - pH and EC/TDS meters - Thermo/Hygro meter
Likes
7
Share
Harvested at end of twelve weeks, At week 11 the trichomes were 95% milky with 60% orange pistils. Appearance of Plant: Short and Sturdy with Thick Leaves Appearance of buds: Big & Dense Density of Buds: 10/10 Resin: 8/10 Dry Time and Cure for Smoke Report: 7 days at 55% Humidity // Temp: 71Β° Smoke Report: The smoke is really smooth that hit you instantly with a head high. Use cautiously as its quite strong if used in bigger dosage. I feel alert and can take on any project I have on the go at the time. Good for day time and also to relax at night. Pros of growing this strain: - Short and dense. Can be grown anywhere (very discreet) - Would be great for SOG - Fast and easy to trim barely any leaves on the flowers Cons: - Small yield - Very Short plant (needed to raise the plant to keep it levelled with other plants
Processing
Likes
7
Share
Had my brother defoliate these girls for me.😎 βœ‚οΈ Just watching for those hairs to show up.♀️
Likes
7
Share
Day 21 today. These two are doing really good so far and I haven’t had to do much with them. Hoping I can get another week of veg before flower, other than that we are looking good
Likes
91
Share
@Salokin
Follow
Hi Growmies, I'm excited to share some big news today! Although there have been some unexpected twists, it's all part of the incredible journey of gardening. I've just completed the harvest, a tad earlier than initially planned, due to finding a bit of mold in one of the buds. Despite this minor hiccup, the trichomes were already at a decent 10% to 15% amber. So, all things considered, the timing ended up being pretty spot-on. The harvested weight was a solid 609 grams after trimming, which is quite a feat! A lesson learned for next time: perhaps I let her grow a few too many buds, leading to a denser canopy than ideal. But on the bright side, the aroma is absolutely divine. I sampled an airy bud that had dried a bit, and wow, it packs a stronger punch than its clone mother. And the flavor? Pure, unadulterated cheese – no hint of pineapple here! Now, the anticipation builds for the final dry weight, which I should know in about 3-4 days. It's always exciting to see the fruits of our labor fully realized. A huge thanks to everyone who's been following along on this journey. Your interest and support mean the world. And now, the adventure continues! I've started on Epic Buzz by Anesia Seeds. The diary for this new chapter is up and running, and the seedlings have already sprouted, marking the beginning of another exciting phase. (https://growdiaries.com/diaries/185718-grow-journal-by-salokin) I can't wait to share more updates with you all. Here's to the continued growth and learning in our gardening adventures!
Likes
3
Share
@fabialien
Follow
Semana del 9 al 15 de septiembre 2024. Gorilla glue Auto de BSF, tiene un desarollo bastante vigoroso, se ve que tiene una genΓ©tica bien trabajada.
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Likes
7
Share
@Chubbs
Follow
FBA2501-week 1 of Veg This week has been wild. Once the roots made a foundation the upper growth has been explosive the last few days. Really cool to watch and see the daily growth. I introduce calmag and grow nutrients this week starting at a 1/4 strength. All in all they've responded well showing no burn what so ever. Happy
Likes
73
Share
@Andres
Follow
I mean this genetics it's excellent ... if I would grow zombie kush again ... good job ripper seed ... she fought and was very strong against the plagues after a beginning outdoors ... she fought against the white fly. worms .. red spider and other insects ... and deserves your recognition ... it will not be the most beautiful plant with its leaves impeccable ... but she is a champion ... thank you ripper seed .. .
Likes
12
Share
@valiotoro
Follow
Hello everyone 😎 After 24hours in a glass of water with a few drops of hydrogen peroxyde all the seeds have germinateπŸŒ±πŸ“πŸŒ They will grow under the new Mars Hydro 1200 evoπŸ’₯
Likes
18
Share
@Hashy
Follow
Week 12 Light cycle=12/12 Light Power=130w Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 40% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use Seperate feeding program. #1 and #2 go onto dragon force. #3 and #4 stay on schedule. Fri 8/3/24 πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§ Method= automatic Feed=Bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=0.5ml/L Terra Bloom=3.0ml/L Sumo Boost=2.0ml/L P/K 9/18=0.5ml/L Easy Ph down=0.15ml/L Ec=1.65 PH=6.5/6.5 Time start=12.00pm Finish time=13.45pm (11Γ—5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=8L Total volume left=3.5L Total volume used=2.25L Volume per plant=L (Est) Runoff. Total runoff=1.5L Ec=1.9 PH=6.2/ πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§ #3 (Day 78)(Day 40 flower) πŸ“‹ Bloom nutes Sat 9/3/24 #3 (Day 79)(Day 41 flower) πŸ“‹ Sun 10/3/34 #3 (Day 80)(Day 42 flower) πŸ“‹ Lowered light power from 130w to 120w Mon 11/3/24 πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§ Method= automatic Feed=water Neutralise=0.1ml/L Easy Ph down=0.008ml/L (3 drops total). Ec=0.2 PH=6.0/6.4 Time start=12.00pm Finish time=13.45pm (11Γ—5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=3L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=2.5L Ec=2.25 PH=6.1/ πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§ #3 (Day 81)(Day 43 flower) πŸ“‹ Tue 12/3/24 #3 (Day 82)(Day 44 flower) πŸ“‹ Wed 13/3/24 #3 (Day 83)(Day 45 flower) πŸ“‹ Lowered light power from 120w to 100w Thur 14/3/24 πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§ Method= automatic Feed=Bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=0.25ml/L Terra Bloom=2.0ml/L Sumo Boost=1.5ml/L P/K 9/18=0.5ml/L Easy Ph down=0.15ml/L Ec=1.35 PH=6.7/6.8 Time start=12.00pm Finish time=13.45pm (11Γ—5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=8.5L Total volume left=3L Total volume used=5.5L Volume per plant=2.75L (Est) Runoff. Total runoff for 2 plants=1.5L Ec=1.85 PH=6.4/ πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§πŸ’§ #3 (Day 84)(Day 46 flower)***** πŸ“‹ H=82cm D=20cm DLI=40.0 Small defoliation. She is going to run a bit longer then the other fast flowers in this run. Looking good she just lacked the light when it was really needed. Back soon. Take it easy.
Likes
10
Share
πŸ“… D78 - 31/10 πŸ“œ Last week of grow. I added Ripen (aka Final Part) and the harvest is scheduled for the next Saturday. Ripen is very acid, so I added a lot of pH+. ✍️ 1,5 EC β™’ 6.1 pH 🌊 10 L πŸ“ 110 cm πŸ“… D79 - 01/11 πŸ“œ I'm only waiting to harvest. I'm really looking forward for it, but is not still the time. I need to wait some days more or maybe also a week. Maybe Ripen can help ? Just added 1 L of water with a little of Ripen. All is stable. ✍️ 1,5 EC β™’ 6.1 pH 🌊 10 L πŸ“ 110 cm πŸ“… D80 - 02/11 πŸ“œ Waiting-Waiting-Waiting ✍️ 1,5 EC β™’ 6.1 pH 🌊 10 L πŸ“ 110 cm πŸ“… D81 - 03/11 πŸ“œ I'm really uncertain about if she is ready or not...Well, I will ask to the mates and I hope someone can answer to me. The conditions are very stable and I added some Ripen today. I will see day by day what to do. I don't want the hurry pushes me to harvest too soon... ✍️ 1,5 EC β™’ 6.1 pH 🌊 10 L πŸ“ 110 cm πŸ“… D82 - 04/11 πŸ“œ She's almost ready, but is not yet the time. Maybe I will flush tommorow. ✍️ 1,5 EC β™’ 6 pH 🌊 9 L πŸ“ 110 cm πŸ“… D83 - 05/11 πŸ“œ She ripened tonight and now I'm positive she's absolutely ready. I started the flush and I will harvest on Sunday. πŸ‘ ✍️ 1,5 EC β™’ 5.9 pH 🌊 11 L πŸ“ 110 cm πŸ“… D84 - 06/11 πŸ“œ Florakleen and darkness today. Tomorrow I will harvest ✍️ 1,8 EC β™’ 4,2 pH 🌊 11 L πŸ“ 110 cm
Likes
19
Share
@Lazuli
Follow
She finally puts on some decent weight, i keep feeding strong for another week
Likes
12
Share
Welcome to Flower Week 4 of Fast Buds Z-Up Auto I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Auto strain Z-Up : Here’s what I’m working with: β€’ 🌱 Tent: 120x60x80 β€’ πŸ§‘β€πŸŒΎ Breeder Company: Fast buds β€’ πŸ’§ Humidity Range: 60 β€’ ⏳ Flowering Time: 8-9 Weeks β€’ Strain Info: 29%THC β€’ 🌑️ Temperature: 26 β€’ 🍡 Pot Size: 12 β€’ Nutrient Brand: Hy-Pro β€’ ⚑ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!